Jump to content
SAU Community

Recommended Posts

Another video to enjoy.

http://www.evo.co.uk/videos/planetevovideo...orsche_gt3.html

Apparently, in the next issue of EVO magazine (out on march 5th) they test the GT-R against the Z06 on the drag strip, the GT-R against the GT3 on the track (video clip) and the GT-R against the R8 on the road.

Can't wait to grab that Mag!

Link to comment
https://www.sau.com.au/forums/topic/211109-evo-gtr-vs-z06-vs-r8-vs-gt3/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Another video to enjoy.

http://www.evo.co.uk/videos/planetevovideo...orsche_gt3.html

Apparently, in the next issue of EVO magazine (out on march 5th) they test the GT-R against the Z06 on the drag strip, the GT-R against the GT3 on the track (video clip) and the GT-R against the R8 on the road.

Can't wait to grab that Mag!

looked like a second faster even with the little screw up at the one of the corners. so I'd say 1.5-2 seconds quicker overall.

Results of the tests are:

0-100-0

Z06 14.0

GTR 13.9

Bedford west circuit

GT3 1:22.6

GTR 1:21.7

Lap times from Bedford west circuit to provide a comparison:

Porsche Carrera GT 1.19.7

Maclaren F1 1:21.2

Enzo 1.21.3

superleggera 1:21.8

599 GTB 1:23.1

997 turbo 1:23.55

996 GT3 RS 1:24.2

F430 1:24.2

E92 M3 1:26.6

Results of the tests are:

0-100-0

Z06 14.0

GTR 13.9

Bedford west circuit

GT3 1:22.6

GTR 1:21.7

Lap times from Bedford west circuit to provide a comparison:

Porsche Carrera GT 1.19.7

Maclaren F1 1:21.2

Enzo 1.21.3

superleggera 1:21.8

599 GTB 1:23.1

997 turbo 1:23.55

996 GT3 RS 1:24.2

F430 1:24.2

E92 M3 1:26.6

.5 seconds slower then a Mac F1 , go you good thing ......

and it begins (again)

lolerskates

Looks like the 'yanks' managed to import two JDM spec RHD GTR's through Jspecconnect.com. They say the paid $4k over sticker and sold one to some 'yank' in new york for $120k or so. The other is going to have a cameo in f2f4 and is sitting in costa mesa, cali.

http://www.edmunds.com/insideline/do/News/articleId=124992

Hopefully they can take it to the tracks so the GTR can "Bless" the nonbelievers.

Edited by chak8080

You folks are too bias. The Z06 was faster.

The Z06 did 0-100 in 8.5 seconds and the GTR did it in 8.9.

The GTR did better 0-100-0, but they had a better reaction time in the GTR (time between WOT and hitting brake pedal).

GT-R: 0-100 = 8.9, 100-0 = 4.3, accel to brake reaction time = 0.6

Z06: 0-100 = 8.5, 100-0 = 4.5, accel to brake reaction time = 1.0

Thus, if you subtract the difference in reaction times, the Z06 was not only faster 0-100, but it's faster 0-100-0 also!

The Z06's lead would've been even larger had they kept going (the article mentioned that the Z06 was accelerating harder past 100mph....this also hurt its braking time).

The Z06 is even more impressive because it has inferior tires and hit the market a full THREE years before the GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...