Jump to content
SAU Community

Road And Track Comparison. Gt-r Vs Z06 Vs 911 Turbo


Recommended Posts

For those that follow Japanese cars, the GT-R is a classic.

It just doesn't have the international recognition right now that the Porsche does, and the Vette only has "pedigree" because America exports its culture rather than a history of internatonal success.

I do realise the C7R is doing really well in Le Mans, but that's a relatively recent thing compared to Porsche's international racing history.

Targa Tasmania next month should settle it...... 3 Z06's entered fighting one 35 GTR, go down the "Modern" entries here, and all with be virtually standard cars;

http://www.targa.com.au/Competitors/Entries.html

In a competition like Targa Tasmania, its always skewed towards the AWD entries. Its near impossible for one day to not have precipitation, whether it be rain or snow. The stages in Targa are also quite tight, and a high powered RWD car isn't going to have the 2nd gear corner exit grip an AWD car does.

Jim Richards has lost, a few times, to a WRX in a Porsche 911 GT3 RS despite all his knowledge of the roads. I was down there in 04 to watch Sullens beat Richards. It snowed on the last day, which basically decided it.

But, on a dry circuit and with "equal" mods, there's no way a WRX could keep up with a GT3 RS.

I think the Z06 will similarly struggle in Targa, but its not indicative of its circuit performance.

Targa Tasmania next month should settle it...... 3 Z06's entered fighting one 35 GTR, go down the "Modern" entries here, and all with be virtually standard cars;

http://www.targa.com.au/Competitors/Entries.html

Wow, I didn't even know there were three Z06's in Australia, let alone competing in Targa.

Have they competed in Targas before? I've never noticed them.

That was a great read... its a set up, the drivers have been paid off, the tyres are wrong on the Z06.

What really made it for me was the line "Id like to see how it goes after 4 or 5 laps". LOL, you wouldnt see it any more lads, thats the point.

What really made it for me was the line "Id like to see how it goes after 4 or 5 laps". LOL, you wouldnt see it any more lads, thats the point.

The Z06's strength is its endurance capabilities, hence its success in ALMS, and why Corvette fanboys bring up running for longer than "one lap dashes".

There are plenty of street cars that will set a blistering single flying lap, but then overheat all its fluids and pads after a half a dozen. It is an issue experienced more by turbo cars than NA, due to the higher heat per unit volume they generate.

It is a valid comment, but if Nissan built the R35 anything like the R34 Z-Tune (which was engineered for all the components to be able to handle 15 minutes at "time attack" pace on a circuit) then it would more than holds its own over a longer distance.

In a competition like Targa Tasmania, its always skewed towards the AWD entries. Its near impossible for one day to not have precipitation, whether it be rain or snow. The stages in Targa are also quite tight, and a high powered RWD car isn't going to have the 2nd gear corner exit grip an AWD car does.

Jim Richards has lost, a few times, to a WRX in a Porsche 911 GT3 RS despite all his knowledge of the roads. I was down there in 04 to watch Sullens beat Richards. It snowed on the last day, which basically decided it.

But, on a dry circuit and with "equal" mods, there's no way a WRX could keep up with a GT3 RS.

I think the Z06 will similarly struggle in Targa, but its not indicative of its circuit performance.

yeh but it is indicative of its on road performance. it rains when dirving on the road, and tight corners are certainly somthing you have to deal with... gtr = faster

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No no, sorry I think I made you misunderstand. I have this Tee as well as the lines that go from there. What I am missing is the banjo bolt that connects this line (OEM turbo oil supply line) To this hole, this line is mounted on the turbo and reaches around it so you have easy access the oil and water supply being rerouted to this dual banjo port in the front. like this
    • Nothing at the moment as previously there was a crappy braided line going from engine block directly to the turbo. I have bought a used OEM hardline for the turbo oil supply, which goes from the engine block to the marked hole. I don't have any of the OEM banjo bolts for oil except the one at the block.
    • This is the tee No specs on the page I grabbed it from, out of stock there anyway. But it kinda looks like a 1mm pitch. Would not think it's going to be 0.75mm pitch.
    • OK, I'm with you now. The outlet of the tee that is banjo'd into the block. Dunno what it is, will have a scratch around. The M11 question is.....messy. The minor diameter of an M11x1.0 male thread is 9.917mm. This is smaller than the minor diameter of a 7/16"-24 UNS (which is 10.08mm). The M11 major is 11mm. That's smaller than the major on a 7/16"-24 UNS (which is 0.4375" or 11.1mm) so an M11x1 bolt should pass on the major side. The pitch of a -24 thread is 1.058mm, which is really close to the M11x1, so it should go in at least several turns. I would expect M11x1 to be loose in a 7/16"-24 UNS, at least until enough thread are engaged to make it stop screwing in, if that can happen. Probably wouldn't happen on such a short bolt as you're looking at on the oil tee. Keep in mind that 7/16"-24 is NOT a standard/typical 7/16" thread. Standard is 20. That's the UNF or fine thread. -24 is really fine. I imagine that Garrett chose -24 for the turbo housing oil inlet to get the number of threads engaged up. I would not expect Nissan to have an imperial (UNF, etc) thread on that tee. I would expect it to be metric (if it is a bolt thread) or BSP (actually the Japanese equivalent of BSP) if it is a pipe thread. Given that it's a banjo, it's going to be a bolt thread. If it looks like an 11mm will go in there, then 11mm seems likely. It is very possible that some clown has stuffed that thread by trying to jam some imperial "near equivalent" into it, perhaps with those hoses of yours. Got verniers? Measure up the threads on the hoses.
×
×
  • Create New...