Jump to content
SAU Community

Long Shot But Worth A Try

NIZ32

By NIZ32,
in Queensland

 Share

Recommended Posts

NIZ32 Apprentice

NIZ32

Posted
Posted

HEY ALL. ITS A BIT OF A LONG SHOT BUT I THOUGHT I WOULD SEE IF ANYONE COULD HELP ME.

I BROUGHT A SET OF PERSONALISED PLATES LATE LAST YR. AFTER BUYING THE CAR I WENT TO PUT THE PLATES ON BUT QUEENSLAND TRANSPORT TOLD ME THAT THE PLATES WERE NOT SIGNED OVER INTO MY NAME. AND THAT THE GUY THAT I HAD BROUGHT THEM OFF HAD NOT GOT THEM SIGNED INTO HIS NAME EITHER. WAS JUST WONDERING IF ANYONE IS FRIENDS OR KNOWS OF THE GUY/GAL THAT USE TO OWN A SKYLINE WITH NIZ32 PLATES. OR IF ANYONE KNOWS OF ANYWAY TO TRACK THIS PERSON DOWN. I AM TRYING TO TRACK HIM/HER DOWN SO I CAN GET THE PLATES SIGNED INTO MY NAME AS I DON'T PARTICULARLY WANT TO BUY A PAIR OF PLATES I CAN'T USE. KEEP IN MIND COULD HAVE BEEN A FEW YRS AGO.

THANZ AGAIN PPL

Link to comment
https://www.sau.com.au/forums/topic/211615-long-shot-but-worth-a-try/
Share on other sites
Revhead Grand Master

Revhead

Posted
Posted

Sounds like the guy you bought them off probably ran into exactly the same issues, then onsold them so they'd be your problem.

Anyway I'm not sure of the particulars but apparently for $15 you can get a name and address from a number plate. I think you might need to provide some kind of info on why you want them (damage to your car etc) but it might be worth following up.

Owgasm Grand Master

Owgasm

Posted
Posted (edited)

Yeah, there is some way to get details from rego plates.

I remember someone doing that a while ago.

Didn't take him/her very long aswell.. said he'd do it and he did it within a day and i doubt he payed to get it done as it was a pointless matter.

But yeah, the guy who sold it to you may have just sold you the plates and was a scammer. i doubt it though.

Search on NIZ32 and it gave me this:

http://www.skylinesaustralia.com/forums/se...ghlite=%2BNIZ32

Don't think it helps much.

Edited by Owgasm
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

QLD transport can contact the owner of the plate for you...

A mate owns the plates "ROYS" and Qld transport contacted him saying that someone wanted to buy the plates etc etc was he interested in selling them and if yes they would pass on the details of the buyer...

But yeah you can ask qld transport to contact the current owner of the plates...

On the other hand one side of me says, return the plates to where you bought them from and kick the seller in the back side for not informing you of this issue...

85URK Grand Master

85URK

Posted
Posted
QLD transport can contact the owner of the plate for you...

A mate owns the plates "ROYS" and Qld transport contacted him saying that someone wanted to buy the plates etc etc was he interested in selling them and if yes they would pass on the details of the buyer...

But yeah you can ask qld transport to contact the current owner of the plates...

On the other hand one side of me says, return the plates to where you bought them from and kick the seller in the back side for not informing you of this issue...

yes u are right there, return them to previous owner bcoz if u pay him for them and contact the actual person who has the papers for them he might turn round and say no thanx i dont want you to have them, then take them off u, and the middle man gets your cash, u get screwed over. so go back to that guy and ask him where he got them from and track it back that way.

NIZ32 Apprentice

NIZ32

Posted
  • Author
Posted

the guy i brought them off didn't change them into his name cause he already had his own plates to put on the car. the plates i beleive came off of a grey 4 door R32 skyline. the fella that owns it now i'm pretty sure has 45AKN plates on the car now

Imtorqing Community Regular

Imtorqing

Posted
Posted
the guy i brought them off didn't change them into his name cause he already had his own plates to put on the car. the plates i beleive came off of a grey 4 door R32 skyline. the fella that owns it now i'm pretty sure has 45AKN plates on the car now

So you dont have any details on him what so ever ????

When I bought my line I had to complete a transfer of rego plates form with his details on them. I was of the opinion that it was similar to when you transfer car rego. If you physically have them I would attend Qld Transport and due to the fact you bought them over a year ago the chances of you having his details are pretty slim anyway. They usually have a form similar to a stat dec behind the counter that you fill out.

That way if an owner comes forward and wants to report the plates stolen they have you over a barrell. Similar to Cash converters have the declaration that the property you are selling/pledging is yours to sell etc. that way when you pawn stolen property it doesnt come back to them.

So basically attend Qld Transport with the plates and you should undergo the same process. Atleast attend the front counter and ask them but as mentioned above you should not have any problems and will only have to do the stat dec thing.

Cheers

Imtorqing

Skyenate Collaborator

Skyenate

Posted
Posted
HEY ALL. ITS A BIT OF A LONG SHOT BUT I THOUGHT I WOULD SEE IF ANYONE COULD HELP ME.

I BROUGHT A SET OF PERSONALISED PLATES LATE LAST YR. AFTER BUYING THE CAR I WENT TO PUT THE PLATES ON BUT QUEENSLAND TRANSPORT TOLD ME THAT THE PLATES WERE NOT SIGNED OVER INTO MY NAME. AND THAT THE GUY THAT I HAD BROUGHT THEM OFF HAD NOT GOT THEM SIGNED INTO HIS NAME EITHER.

Did the guy you bought them off ever have them on a car? One would hope they were his to sell because the owner can just say theyre his and get them back once he knows where they are surely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...