Jump to content
SAU Community

Recommended Posts

hi guys/gals,

just looking for some opinions from people who know a little about/have owned a series 8 RX-7.

Currently i am seriously thinking about buying one. Have never driven one but on paper they look pretty good?

i have only ever owned nissan's (last 2 have been 33gtr's). will I be be disappointed hoping into an rx-7 after having owned gtr's for the past 5 years?

any opinions appreciated.

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I have never had a Series 8, but I have had a series 2 and a series 3 and a series 4...

My series 4 Turbo was fairly heavily modded and was awesome awesome fun, but was using too much fuel to keep with prices going the way they are atm. (300k's 65Lt tank average at the end, stock was 430ish k's) For an idea of what it was like if you are interested here's the link:

http://www.cardomain.com/ride/746227

The power is very addictive, but im sure you know that already having owned GTR's. Are you going to keep it stock or go for power?

I'd make sure to get a compression test done before buying, to give an idea of engine condition.

I realise the series 8 is a completely different chassis but engine wise once modded are similarish.

If I had the money I would love a series 8, but I guess im stuck with my GT-T :thumbsup: (My first piston powered car ever, and i love it...even if the old rx7 is wayyyy faster)

Edited by Scottydoo
Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3800665
Share on other sites

My mate recently bought a Ser 8 RX7 and brought it up here from down south.

I thought my 32 had a pretty low center of gravity not compared to this... lol.. Looks amazing and feels great, the drivers seat is an experience similiar to the Supra wrap around layout, feels like there is only one design purpose for it, heavily race orientated. You feel somewhat claustrophobic when the door is closed :P

As far as power delivery goes coming from a GTR, im used to the 2 turbos spooling simeultaniously (spelling) and giving you a harder in the seat feeling in comparo to the sequential RX7 set-up which comes on gradually from down low, when turbos switch you can feel the brief soft spot and then the larger turbine comes into action. The early boost means his car keeps up with mine neck and neck from a sedate take-off which is pretty impressive. Car sounds phenomanel and definately an eye turner, he's only had the car for a few weeks and i've only seen in on 2 occasions so can't comment too much.

Edited by Tomek
Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3800771
Share on other sites

Well i came from a Series 5 rx7.. and although it was a purpose built race car, it was an awesome machine to drive

and when i drove it on the streets everynow and then, did it turn fkn heads lol

i ended up selling it and buyin a GTR and although it was makin 300awkw, im yet to drive something that was as brutal and fast as a GT35R powered bridgeported 13b hahah

IT WAS A FKN ANIMAL!!!!!!!!!

rotaries can haul some serious ass and for most of those non believers, they do make great torque (READ: when turbocharged properly)

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3800797
Share on other sites

If only i had known, i woulda sold u mine.. At time of sale i had just finished resprayin myself.. in Tinter Red (READ: BRIGHTEST RED AVAIL) with a black c/f custom bonnet and full kit :P

Ive still got the motor thou, but the shell was sold for 4k with suspension and kit and cage :(

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3800843
Share on other sites

Well depends on the gtr... mine gave me around 440km to around 55lts, whether it was highway or city.. it didnt really change at all.

My rotor gave me around 150-180km per tank of PULP.....the rotor wasnt makin that much more power either... and it was significantly lighter

Havin said that thou, ive known ppl makin around the 300-350rwkw markin using alot less fuel than what i was.. like around the GTR fuel consumption

Jump on the Ausrotary.com forums and have a read.. i might even find a fuel comp link for ya as im on that forum as well haha

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3800994
Share on other sites

beautiful car.....but if you are 6 ft + you will really have issues fitting in comfortably...I went for a ride in a mates one and it was stupidly fast. But I was just so uncomfortable in it......get in one and see if it is you...

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3802156
Share on other sites

hi guys/gals,

just looking for some opinions from people who know a little about/have owned a series 8 RX-7.

Currently i am seriously thinking about buying one. Have never driven one but on paper they look pretty good?

i have only ever owned nissan's (last 2 have been 33gtr's). will I be be disappointed hoping into an rx-7 after having owned gtr's for the past 5 years?

any opinions appreciated.

I have a S8 RX7 (well my misses owns one). Make sure you look at a Type RS or above, an RB is still awesome, but makes a little less power.

Being 6'2" I am not comfortable in the drivers seat and cannot heel-toe properly as my knees hit the steering wheel. We looked at a Spirit R as well at the time, but I couldn't get my shoulders into the factory recaro's in that.

Comparative to a 33 GTR (which is my car) you won't be disappointed, there is very similiar performance between our cars and both have an almost identical modifications list, but the RX7 is RWD (obviously) and definitely handles better. Fuel consumption on the 7 is better as well.

Reliability hasn't been an issue, we shopped around before picking the one we thought was best.

I honestly prefer the RX7, but would need a crazy low mounted bucket seat to drive it regularly.

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3802638
Share on other sites

RX 7 = F**kin' NUTS!

Friend gota Series 3 and put a Series 6 engine in it (Rebuilt), Large high mount single turbo, front mount intercooler with shorten piping to reduce turbo lag, high flow air intake, boost controller, full exahust, rebuilt diff, gear box with triple plate, large brakes, wheels the works.

When I went for a spin, went sideways in 1st and then sideways in 2nd. This car was so light and so powerfull he had to customize his no. plates to INSANE.

But he told me ppl make jokes about Rotories engines how they have low torque so there was that saying "C'mon! REV YA ROTORIES!"... Is this true?

Link to comment
https://www.sau.com.au/forums/topic/215185-rx-7/#findComment-3802872
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...