Jump to content
SAU Community

Recommended Posts

Hi all, as the it says I'd like some feedback from our Victorian friends on Carizma at Richmond. Has anybody bought a car from them before?

They seem genuine to me. If yes have you had any big problems with the car afterwards??

Cheers :D

Dave

Hey mate, bought my 1st R33 GTST from them, it wa sa fast car, never had a problem with it then and now, they looked after me and gave good service.

I've got no complaints.

My new car is a R34 GTT, i purchased this from Kamikaze in vic, awsome service and assistance when needed,get a good discount on services and work from them if its needed.

they seem a bit expensive... can you talk them down a few thousand on an r34 gt-t for example...?

Mate, If I was down in Melbourne I wouldn't mind helping you out as my day job is negotiating (Purchasing Mgr.) but I'm sure you can negotiate a few G's of the price as every dealer likes to move the stock and the timing is good given that it's a bit slow in general and people are not spending big at the moment.

I think I got a great deal for R32 GTR from them and I've seen few dealers and private cars. Also it's worth paying little bit extra for the right car as well.

Good luck

Dave ;)

Bought my GTR from them.

They did a great job connecting my turbo timer and alarm all together.

A nice job cleaning the car up and fixing afew things up.

And they were the only dealer who would take a trade in from me.

Their price is reasonable but I guess they are willing to allow better offers.

Carizma is a SAU member, his name is David. Look him up in the members section and have a talk with him.

Ii bought r34 3 moths ago from carizma. I have full time job and Im in brisbane so it was pretty hard but wasnt worry about what i get cause of my mother-in-law (judge(good one)) so i paid ful amount b4 i saw the car. David agreed to cover delivery fees $xxx. the only problem i had was a strange noise coming from gearbox which i fixed 3 weeks ago ($400 and bloody TCS light doesn`t work (this almost killed me). $1000 less would be a very good deal but 2000 km`s for free is almost the same thing.... I`m very happy what i have and 3 workshop told me that is`t very good car. I recommend CarizmaInternational.

......but.

i found lately some sticker in glove box and have no idea what to think about it, anybody ??

cheers

post-47460-1209609248_thumb.jpg

I bought my S1.5 R33 off carizma about 18months ago now and am quite happy. Car is straight (never been in any serious crash) interior and exterior was in great nick and got it for a fantastic price. But i knew it was stock that had been in there showroom for sometime so had a bit more leverage on the whole negotiation front.

lol in reference KODE to the stickered km's not matching your ODO. Sounds like every grey import that comes into the country. My cluster said that the car had done 65k but the service sticker on the window reads 117k! just got to make sure you check over the cars for tell tail signs of there real age.

Cheers

Camden

  • 6 years later...

Signed up just to dig up old thread and post about the fact his "friend" LOST at VCAT.

Having been through VCAT process a number of times, one does simply not lose if one has a solid case... In fact if ones case is solid - one basically can neva looooose! Hence VCAT is good IMO.

Perhaps posting up the FULL story rather than a little piece of it, might make the story more credible.

  • Like 1
  • 1 month later...

Let me just start by saying this guy went through Vcat with a bogus story and had to withdraw

Personally would stay clear. Friend of mine made the mistake of putting a deposit on a Skyline crossover advertised by Carizma before requesting an export certificate stating the km's of the car which they couldn't provide. Apparently VCAT weren't interested in the fact that there's an auction sheet for the car stating it had done c.63,000 km more than what Carizma advertised and my friend couldn't get his money back. Clearly he should've done his homework before putting a deposit but it kinda shows why odometer tampering is so common in Australia and how easy dodgy dealer's can make a quick buck off it. This post by someone in 2004 suggests it's been happening for over 10 years - http://www.supraforums.com.au/forum/topic/501-carizma-international-warning/

I feel terrible as I got him interested in imports and hope this will warn others not to make the same mistakes

How about the fact the

Signed up just to dig up old thread and post about the fact his "friend" LOST at VCAT.

Having been through VCAT process a number of times, one does simply not lose if one has a solid case... In fact if ones case is solid - one basically can neva looooose! Hence VCAT is good IMO.

Perhaps posting up the FULL story rather than a little piece of it, might make the story more credible.

Thats exactly right simply trying to bad mouth us when Visa card, Consumer Affairs and Vcat all found in our favour, its sour grapes. Not going to go into it here but please remove this thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
    • Yea, that is what I was getting at in my ramblings too. The nismo one actually is a 1.5 way and a 1 way. They don't do a *2* way because a true *2* way would have equal ramp angles. Or is that a true 1.5 way? Realistically I think a "1.5 way" does not actually exist. A diff can either lock in two directions or one. It also doesn't help that a LOT of people in Australia speak about 1.5 way diffs are referring to their 1 way diff.
    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
×
×
  • Create New...