Jump to content
SAU Community

Recommended Posts

A lot of the initial hesitation for going to the Vi-PEC by Power FC owners was the lack of a dash mounted interface unit. This is what most wanted so this product is a perfect solution.

Another solution would be to buy an old Game Boy from a garage sale for $10 and throw it at their thick heads.. haha.

  • Replies 895
  • Created
  • Last Reply

Top Posters In This Topic

The Ruzic does seem to fill a gap, but the point for a data logger and dash is so that you can run sensors not associated with the ECU. A dash that only takes inputs from the ecu is great as its plug and play but doesnt tell you some other things you MAY want to know. Thats where a wire in dash MAY be better for some people

Would it be possible to wire in your additional sensor to one of the spare Vi-pec analogue inputs and then get the Ruzic to display the new input? Would be a nice and tidy solution. Plus you could get the ECU to react to that input, datalog it, whatever..

The Ruzic does seem to fill a gap, but the point for a data logger and dash is so that you can run sensors not associated with the ECU. A dash that only takes inputs from the ecu is great as its plug and play but doesnt tell you some other things you MAY want to know. Thats where a wire in dash MAY be better for some people

umm, you'll find that the RE engine monitor does take inputs from any sensor you want. It's just been customised to work in direct link with the Vipec. You can wire in more sensors if you like.

The datalogger does everything a Motec logger can do.

You name it, it has it

Hi, Paul Ruzic here. I designed and built the EM PRO II and RaceLogger. I will happily discuss the technical specs of the unit but cannot discuss pricing or availability as per forum rules.

The EM PRO II was originally designed as a stand alone unit, then dirtGarage made the introduction to Ray Hall and the ViPEC ECU. So now if you have a Vi-PEC you can plug it in and reallocate all the normal inputs the EM PRO II already has to other channels expanding its monitoring capability.

Technical Features:

6 analog input channels

Engine RPM input

Vehicls speed input

Remote data page push button

Remote alarm acknowledgement push button input

2 Stage shiftlight output

Warning light output

Alarm buzzer output

Auxillary output for a relay triggered by RPM or Speed or for PWM electric water pump speed control.

Serial data output for loggint with the RaceLogger

Serial data connection to the Vi-PEC ECU

The EM PRO II has 5 data used to show details of each individual data channels that are being monitored. Each of the pages can be configured to show up to four input channels at at time. An optional remote input button mounted within easy reach of the driver can be used to scroll between the pages.

Each monitored channel can have a "greater then" and a "less than" value assigned to them. The alarm situation can trigger the warning light / buzzer or both.

The proiority of the alarms can be set so the most important alarms are always at the top.

Up to three alarms can be seen on the screen at once.

The alarms can be set to hold for a minimum time so they are never missed or to not clear until acknowledged.

To ensure oil pressure is maintained through the rev range, the EM PRO II has two additional oil pressue points that are set referenced to RPM.

Without a Vi-PEC you can piggyback signals from the ECU (so far we have done units in cars running Motech, Haltech, Autronic, PowerFC) and also provide addtional sensors for signals ECU's don't usually support such as Oil Pressure, Oil Temp etc. With a Vi-PEC you can still add up to 6 additional channels using extra sensors.

Vi-PEC Channels Supported

RPM

Knock - also allows option to alarm knock against the Knock target table

MAP

MGP

Injectory Duty

Injector Duty (stg)

Coolant Temp

Air Temp

MAF gs

Knock Count

Temp 1

Temp 2

Temp 3

Temp 4

Volt 1

Volt 2

Volt 3

Volt 4

Volt 5

Volt 6

Volt 7

Volt 8

Volt 9

Volt 10

Volt 11

When connected to the Vi-PEC data logging is performed with the Vi-PEC ECU. When stand alone the EM PRO II can be connected to the RaceLogger to add to the logging capabilities of the RaceLogger.

The EM PRO II has external Shift lights / warning lights and a large alarm buzzer for optimim setup for racing. The external page select / alarm acknowledge buttons also allow for driver convienient mounting for racing.

I have to also thank guys like Paul, Darren, Duncan, Mick, Noel, Gervase, Simon, Danh, Cam, Mark, Mitch, Pierce and others (you know who you are) who have supported this product through development and testing.

Thats the quick overview of the unit. I almost have a brochure ready (thanks Cam) which will detail all the information.

Sounds the biz...apologies, from what i read in other posts regarding the ViPec doing the logging etc and the fact that it was plug in i assumed it didnt have any external outputs for logging. So its great that it has 6 external analogue channels!

Any other screen shots. Is it always 4 lines? You say 5 pages with each page beign able to show up to 4 channels. Does that mean you can only show one or two and get bigger font/readout on each page?

Considering your car is for mainly track/circuit work (I am assuming from your thread in the motorsport section) why did you not go for an aftermarket dash such as that offered by Motec, Aim, Stack... etc?

Mike

That question has pretty much been answered the price and the fact that the Ruzic Engineering gear does the exact same job as the AIM etc but for a price you cant go past.

A mate of mine who's car I do all the work on has just ordered an AIM dash that has the same functions as the Ruzic gear and it is $3300.00 wich may be ok for him due to the budget he has to support his racing. But for me it makes more sense to use a product that does the same job without any compromises in its performance leaving me with more money to put into other parts of the car.

Edited by dazmo
That question has pretty much been answered the price and the fact that the Ruzic Engineering gear does the exact same job as the AIM etc but for a price you cant go past.

A mate of mine who's car I do all the work on has just ordered an AIM dash that has the same functions as the Ruzic gear and it is $3300.00 wich may be ok for him due to the budget he has to support his racing. But for me it makes more sense to use a product that does the same job without any compromises in its performance leaving me with more money to put into other parts of the car.

Thanks dazmo

PS: feel free to update your thread in the motorsport section, love the R33!

Thanks Trent for the info regarding the boost function. I am still undecided whether I should ditch my Blitz dual SBC or keep it.

Thanks also to Paul Ruzic for allowing me to test out his new products and for his patience with the development because I can be OCD sometimes lol The great thing about Paul products are their flexibilities and ability to customise to your needs. Paul doesnt leave any rock unturned and covered all possibilities before releasing his trial products. I've been testing Paul's EMII and 4WD controllers. Both have worked flawlessly and gave me more confidence in what I should be doing on the track.

Now that his can be hooked to the vipec, I might give the vipec a try.

I wont go overboard here and will write more feedback in the appropriate Ruzic thread.

Anyway the endless ability to program the shift light, warning lights, warm up lights and buzzer are awesome.

If you think dirt's image is bad, don't laugh at mine ok.

IMG_5305.jpg

Sorry, my lens did not like the inadequate light in the shed. I will take some more pics when the v88 is installed.

Edited by 9krpm

Hi Roy, the display is 4 lines of 20 characters. The display can easily be read from the drivers seat to any mounting postion so there isn't a need to join lines and make them bigger.

You can setup the pages however you like, one guy has put oil pressure at the top of every page as he likes to see it all the time. You can make pages with 1 to 4 items.

Thanks for great feedback dazmo, 9krpm.

Paul

Hi Roy, the display is 4 lines of 20 characters. The display can easily be read from the drivers seat to any mounting postion so there isn't a need to join lines and make them bigger.

You can setup the pages however you like, one guy has put oil pressure at the top of every page as he likes to see it all the time. You can make pages with 1 to 4 items.

Thanks for great feedback dazmo, 9krpm.

Paul

LOL, you guys must have better eyes then me and a smoother ride at light speed on the straights. At speed when i glance down to look at things i cant read the Power Fc readout if it has any more then two lines being displayed, even when on steering column.

Thats where the alarms and warning lights are great...just means you have to se them conservative so that you know when you have to start looking down

Roy, this thing is so much easier to read than the FC hand controller display.

In the event of a malfunction, the warning light and buzzer go off, the screen switches to a warning menu and lists the faults. There are also programmable warning pattern, duration and ways to turn it off.

It has enough warning lights and functions for me to keep an eye on my Willall racing built engine. Now that the vipec is on order, I think I will have less worries on the track :D

Edited by 9krpm

I mounted the datalogger in the glovebox (since you only need access to plug in USB storage, and that cushions it a bit from shock) and the EM2 unit is on top of the clock which is easily seen thru the steering wheel. Mine is running with a PowerFC sniffing 6 channels from there and about 10 other items from elsewhere.

Sorry its a bit off topic but they are an excellent unit. Probably need help with install if you struggle with electrics like me though lol.

I mounted the datalogger in the glovebox (since you only need access to plug in USB storage, and that cushions it a bit from shock) and the EM2 unit is on top of the clock which is easily seen thru the steering wheel. Mine is running with a PowerFC sniffing 6 channels from there and about 10 other items from elsewhere.

Sorry its a bit off topic but they are an excellent unit. Probably need help with install if you struggle with electrics like me though lol.

u should try installing them with non matching colour codes :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...