Jump to content
SAU Community

Recommended Posts

i have heard that replacing the cat converter with a pipe or even gutting it will give better spool up because of less restriction.... (most ppl know this) about 4 years ago when i had an r31 non turbo a guy at an exhaust shop told me that if i removed it my engine would blow up!!

I know this is ludacris but are there any side affects of removing the cat???

i ask this, because my old n/a r31 ran like a pig without the cat (maybe not enough backpressure)

Link to comment
https://www.sau.com.au/forums/topic/21891-cat-killer/
Share on other sites

it will give better spool up, and you may notice a slight power increase without the restriction of the cat converter. it is illegal though for street use, and the fumes are quite bad running without the cat converter, you dont wanna breathe that stuff in :P. you will also get black particle shit all over your rear bumper.

Link to comment
https://www.sau.com.au/forums/topic/21891-cat-killer/#findComment-465474
Share on other sites

Years ago I ran my ole VL Commodore without a cat after a nasty incident involving a cattlegrid. (ripped the whole exhaust off from the bottom of the headers.)

Idle was a bit rougher, less power down low but once the revs built up a bit there was shitloads more power.

Also sounded great in underground carparks :D

Link to comment
https://www.sau.com.au/forums/topic/21891-cat-killer/#findComment-465574
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...