Jump to content
SAU Community

Recommended Posts

forgot to add this

theres a form of modding a import that is 10x worse then riceing it up, and that is the so called DRIFT PIG i know of ppl who have had nice cars but decided to turn there cars into drift cops even tho they dont drift but are just after a drifter image crazy,,, i rekon

see now, it comes down to what u define as rice, these are the 2 main ones ive heard: very asian inspired eccentric styling, and modification which is made to make the car look like it is faster than it is or using a performance part for cosmetic reasons. and i gotta say, that 2nd definition applies to pretty much everyone on this site. so really there is a bit of rice in everyone. i do agree with you though, people look for that thrashed out look to make it look like there car gets thrashed, when in fact it doesnt. imo its that mentality which is everything wrong with the import scene these days.

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Who cares what style people define your car as... if you like it, that's all that matters, and if you like it, chances are someone else is going to like it too.

We all drive ricer cars, given that this is a Skyline forum and the term rice refers to the Japanese car scene... but who cares? Not me.

no mate its not about how much money they've spent on their car

its about cars that are highly modded and showing the viewers the mods in detail

im sure if you had a tough car you wouldn't say no to a magazine or DVD cover/feature

personally i always wanted me car to be on the cover of a mag and it was a massive achievement for me and great exposure for my business

Why are you defending yourself to a fu*kstick who only has 5 posts and is obviously here to start a shit fight?

Outlaw, you need to make some usefull posts before you start bitching about 'ricers'.

Bad day today, sorry :rofl:

not sure what you want to define it as but LED tail lights on r32's or any skyline is rice, shit, gay whatever you want to call it

Even worse on 180's....the ghey round ones that bug out look so damn ugly.

Notice how they all go for a round tail light......everyone wants a skyline...LoL

HAHAHA would make a good sig.

Even worse on 180's....the ghey round ones that bug out look so damn ugly.

Notice how they all go for a round tail light......everyone wants a skyline...LoL

You're fuggin joking right? You think the old style tail lights in the 1st pic look better than the updated Type X style lights? The older style look absolutely terrible compared to Type X lights!

post-5850-1211347576_thumb.jpg

post-5850-1211348746_thumb.jpg

Edited by ~Hypnotik~
You're fuggin joking right? You think the old style tail lights in the 1st pic look better than the updated Type X style lights? The older style look absolutely terrible compared to Type X lights!

Show us what these 'updated type x lights' look like.

But yeh so far if i had a 180 id have those lights in the 1st pic,maybe tint them a little.

You're fuggin joking right? You think the old style tail lights in the 1st pic look better than the updated Type X style lights? The older style look absolutely terrible compared to Type X lights!

I'm steering towards the the older style but topped off with a Origin / Vertex Bodykit and no spoiler.

Type X, at 1st I thought it was an aftermarket thing but found out its a factory (updated as you said) Guess I don't mind.

AS LONG as its not on a S15. If you have a S15 stick to the factory rear lights. I saw one this morning and made the car look cheap and tacky IMO.

AS LONG as its not on a S15. If you have a S15 stick to the factory rear lights. I saw one this morning and made the car look cheap and tacky IMO.

IMO the stocko yellow indicator section is ugly as and the crystal versions (that keep the red part red, and simply make the indicator clear) are a massive improvement

IMO the stocko yellow indicator section is ugly as and the crystal versions (that keep the red part red, and simply make the indicator clear) are a massive improvement

Yeah I seen that before, gives it an updated look but I guess I just prefer the the orange indicator.

post-46584-1211353827_thumb.jpgpost-46584-1211353918_thumb.jpg

Guest trikdoutvl

GAY RICE

gt wings are ghey full stop

30 inch cannons on ur exhaust are ghey

bov that sound like a hampster having a orgasim are the WORST modifications eva

stupid coloured leds in ur lights are ghey

20 inch chromies are ghey

so low u caint enter a car park GHEY

having a shopping list down the side of ur car when u dont have any parts from them

SICK IMPORT

nice clean painted car (ALL 1 COLOUR)

nice bodykit in good nick

nice set of 17 or 18 mags

nice clean interior with a few gauges n some bucket seats

not overly loud just a lovely rb humming

limo tint

thats the wat i feel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
×
×
  • Create New...