Jump to content
SAU Community

Recommended Posts

Knowing Peter he would rip the VR38 out and put the RB26 in there, just cos its bettera. :P

Only if I turn the RB26 into an RB3.2, cos it is really bettera :yes:

Well you know what I am doing to the bottom end , now the head.

Do you think I should just clean it up a bit and put oversize valves and Titanium valve springs OR

Race port the head, 1mm oversize supertech valves IN/EX, valve guides, spring/retainers and shims

Might take the NISMO badge off the back and get a BIG RB320GTR one made up :wub: Oh and in RED because RED is faster :wub::wub::wub::wub::wub::wub:

Once it is all done I should be able to get to Woolies under 10s :woot:

post-52098-0-31557600-1403490403_thumb.jpg

Thanks , I am waiting for a reply from Jim to get an answer from some of the questions I put to him , basically what is best for the motor with this type of build .

I will have the torque I want so I really do not need to do it for that, so ????? :wacko:

This is now officially the Tt350gt / real NISMO1 build thread.

Hopefully a mod can change the thread title ;)

Can't wait to see the results. Should be fun! Be nice to be able to get what you want.

Yeh it is confusing, I did ask SAU to help.

I cannot log in on my laptop under TT350GT and I cant change anything?? I had to make a new Name , "The Real Nismo1". for my laptop and I cannot use both names on either of the computers and the laptop is great while watching TV or DVDs or whatever, so :whistling:

I cannot do many things on my laptop to do with this site for whatever reason :wacko:

But, as for the build , you blokes will think I am nuts but I do not want to take it to the extreme the 3.2 stroker could achieve but it will be great :yes:

Sorry for the name confusion :action-smiley-069:

Just been doing a bit more homework and I doubt if my Stroker setup will get over 400wkw on 98 pump unless I change the cams, double the Walbro pump and at least the Turbo housing as mine is smallish to get the response I asked for BUT it will have a lot of go with a shit load of Torque going on. So all good :wub:

My Haltech Platinum Pro will allow me to use both E85 , pump 98 or a mixture , might have to have a chip or something? I guess that will give me more if i want, but no one sells it here,haha :no:

This is now officially the Tt350gt / real NISMO1 build thread.

Hopefully a mod can change the thread title ;)

Can't wait to see the results. Should be fun! Be nice to be able to get what you want.

HAHA , Thanks Ben, but all sorted and the thread is all yours :yes:

I see some go for years you are lucky once I decide, get the help I need its over in a week or 2 :whistling:

Let you blokes know when it is finished

Thanks everyone :action-smiley-069: well, OK thanks for the laughs Scotty :wub:

Haha,

I don't want the thread for myself. I have a 30 bottom end in my stagea. ;)

All the best with the build.

I'm sure it will be great and hopefully all done nice and quick so you can hammer down to woolies!

Haha,

I don't want the thread for myself. I have a 30 bottom end in my stagea. ;)

All the best with the build.

I'm sure it will be great and hopefully all done nice and quick so you can hammer down to woolies!

when you say woolies....you don't mean woolworths right? :woot: or do you?

In my one I did very little to the head, clean and remove any rough edges that can cause turbulence and fit a set of BC springs, the stock head will flow 450kw without much drama

Hi Mick,Love to see some Dyno readings on this site,before and after 3.2 rebuilds especially torquey ones, maybe start a new thread to make a few blokes happy, happier,less grumpy :)

Tried to find some other thread but this bloody laptop needs a medic , try on the PC after golf, lifes a turd :)

There is, well not so much before and after more just different setups and their result in the Forced Performance Thread home page at the top there are dyno result threads

http://www.skylinesaustralia.com/forums/topic/104332-rb30-hybrid-upgrade-all-dyno-results/

http://www.skylinesaustralia.com/forums/topic/93880-rb26-turbo-upgrade-all-dyno-results/

This are the two most relevant for you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...