Jump to content
SAU Community

Recommended Posts

wow so much of it we pay is in tax...what I would love to know or calculate some day when I am bored, is just what percentage of the average wage goes in taxes...Not just income tax, but GST on an average weekly food/petrol budget, just normal day to day spending ...I would love to know what percentage of an average wage goes in taxes...anybody here mathematically gifted ?

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

The best solution is to reduce the amount of driving we do. Walk, push bike, train etc. Save driving for evenings and weekends, rather than commuting in traffic.

Our weekly petrol expenses will go down, or at least break even with price increases, and we'll be creating less pollution, meaning we get rain in winter and sun in summer and not the other f**king way around :D

I filled up at 151.9. Cost $80. I told the owner, "my first car cost $60 and it had half a tank of gas".

When I was really young a pack of cigs cost about 18c. Petrol was about 10c a litre. I smoked and had a V8. Got $20 a week.How does that work out at todays prices?

It is all relative. Look at what you earn compared to today's costs compared to earnings V cost say 50 years ago.

Remember I am the 66yo. I think that today we are better off

When I was a 20 yo, the basic wage was about $25 a week. A Commonhore cost about 8 or 9 months wages.

The "average" wage is now about $800 a week. A fairly good car costs about the same, 8 or 9 months wages.

The answer............Gas it!

FYI fuel is from o.s in australia only 15% is shipped here the rest we find on our own.

Fuel price is determined by the price on singapore fuel prices, for all the dribble i read about it I could not work out why

Petrol companies make a 5c profit on fuel a litre, the rest the government take. So yes the government is ripping us of... Why? to build crapper and crapper roads when they rekon they improve them.

my frustation is in a different area atm..... car needs new king pin bearings and none in australia. There's 4, 2 on each side. Have sourched 2 from bearing place but toher 2 are odd size and have to get through nissan. nissan say 2 weeks but pfft they are always wrong :laugh:

Oil CO., Petrol Co.

Are we talking like, Coles and Woolies versus Caltex, Shell?

AFAIK Australian crude is not suitable for making diesel. Correct me if I am wrong.

AFAIK Australian crude is not suitable for making diesel. Correct me if I am wrong.

Nah, I am not 100% sure what aussie crude is used for, but I doubt that would be the case. Because diesel is made from hydrocarbons with quite large molecular chains, diesel actually requires less thermal (or catalytic, but you don't NEED to use a catalyst for crap grade diesel) ) cracking than petrol.

Also, it actually cracked from the distillate (the crud left over) after distilling the "higher" hydrocarbons such as napthra (the main aromatic associated with petrol - ie the stuff they use to raise the RON) propane and ethane, Ergo I think diesel could be taken from the really crap grade crude that even petrol wouldn't be worth extracting from.

This might get me in trouble... :down:

I believe we are still paying too little for petrol. The price of petrol should be higher and should have been higher than it currently is a long time ago. Filling my Stagea hurts my hip pocket as much as the next person, maybe even more so. I do around 30-35000kms each year, so it's not cheap, especially when you consider the price of BP Ultimate is rarely discounted (and BP don't have fuel vouchers).

But bring on $3.80/L I say!

We desperately need to be looking seriously at alternative fuels; BioDiesel, CNG, Ethanol, Electric (not really suitable for Australia yet), Hydrogen, LPG (still a fossil fuel derivative). Not just because the price of petrol is skyrocketing, but because we need a cleaner atmosphere in which to live. The higher the price of petrol the sooner we will take seriously the alternatives, and the cheaper they appear in comparison. Had we been paying a high price for petrol already, a price which you might say justifies our contribution to the fouling of the air we breathe (consider it a tax), we would surely have delivered a cleaner, more efficient fuel source and delivered it on masse to the motoring public. Countries have done it already, countries with a much smaller hip pocket than our own.

Brazil is the glory country here and have proven it can be done. With a budget revenue similar (slightly smaller) than our own, almost 10 times the population and a per capita GDP less than 1/3 of ours, they understood the economics of the proposal for cheaper alternative fuels a long time ago. Australia is a position to do the same whether it be with Ethanol or another alternative fuel.

We already support a sugar cane industry, have large reserves of ©NG and LPG and a fledgling BioDiesel community. What we really need is for our government(s) (Federal and State), industry and private enterprise to back one or two options (not necessarily those I have mentioned) and make a committed effort to ensuring the supply and use.

Governments need to be the primary driver offering either direct rebates and stamp duty / registration concessions for cars that are converted or designed for use on these cleaner fuels (much like LPG at the moment).

This is the answer to the rising cost of petrol prices. This is the ONLY answer. Whether it happens now or down the track when petrol is $3.80/L will be determined by us.

And one more thing... anyone that thinks the oppositions idea of reducing the excise on petrol by 5c/L is a good idea... You need to have a serious think. If you use a full 60L /week, that's a net saving of just $3... or $150/yr. Wouldn't you prefer the government instead put your $150/yr into developing new, cheaper, cleaner fuel supplies?

Thats good. We do have LOTS of capped oil producing wells in Australia. We also have Cracking and Platforming technology. I think that like the US we have an agenda to use as much of everybody elses crude, and then when they run out, we will accelerate our alternative energy sources development.

I agree that petrol is CHEAP in this country compared with say Europe. Gas and diesel are very prominent in Europe. We have the gas, but As I said before diesel is a production problem here.

As long as the Oil/Petrol companies control production and price, we at at the mercy of the SYSTEM. Capitalism.Profit, GREED>

And of course the Govt of the day profits.

Edited by 66yostagea

can't blame the Saudi's and others that control the world's oil reserves for ripping us off whilst they can: once their oil runs out they will be back to filling egg timers with the only other resource they have, "sand". it's going to be tough for the Shieks' when they have to trade their mercedes grande in on a second hand camel, imported from Australia.

This might get me in trouble... :)

I believe we are still paying too little for petrol. The price of petrol should be higher and should have been higher than it currently is a long time ago. Filling my Stagea hurts my hip pocket as much as the next person, maybe even more so. I do around 30-35000kms each year, so it's not cheap, especially when you consider the price of BP Ultimate is rarely discounted (and BP don't have fuel vouchers).

But bring on $3.80/L I say!

We desperately need to be looking seriously at alternative fuels; BioDiesel, CNG, Ethanol, Electric (not really suitable for Australia yet), Hydrogen, LPG (still a fossil fuel derivative). Not just because the price of petrol is skyrocketing, but because we need a cleaner atmosphere in which to live. The higher the price of petrol the sooner we will take seriously the alternatives, and the cheaper they appear in comparison. Had we been paying a high price for petrol already, a price which you might say justifies our contribution to the fouling of the air we breathe (consider it a tax), we would surely have delivered a cleaner, more efficient fuel source and delivered it on masse to the motoring public. Countries have done it already, countries with a much smaller hip pocket than our own.

Brazil is the glory country here and have proven it can be done. With a budget revenue similar (slightly smaller) than our own, almost 10 times the population and a per capita GDP less than 1/3 of ours, they understood the economics of the proposal for cheaper alternative fuels a long time ago. Australia is a position to do the same whether it be with Ethanol or another alternative fuel.

We already support a sugar cane industry, have large reserves of ©NG and LPG and a fledgling BioDiesel community. What we really need is for our government(s) (Federal and State), industry and private enterprise to back one or two options (not necessarily those I have mentioned) and make a committed effort to ensuring the supply and use.

Governments need to be the primary driver offering either direct rebates and stamp duty / registration concessions for cars that are converted or designed for use on these cleaner fuels (much like LPG at the moment).

This is the answer to the rising cost of petrol prices. This is the ONLY answer. Whether it happens now or down the track when petrol is $3.80/L will be determined by us.

And one more thing... anyone that thinks the oppositions idea of reducing the excise on petrol by 5c/L is a good idea... You need to have a serious think. If you use a full 60L /week, that's a net saving of just $3... or $150/yr. Wouldn't you prefer the government instead put your $150/yr into developing new, cheaper, cleaner fuel supplies?

it's great to grab the moral high ground: and while you are up there think about the consequences of soaring fuel costs for truckies, farmers, trawler operators, etc. if fuel goes to 3.80L [$2 above present], on your example of 60L/week, thats an extra of $120/week which is $6000/yr, great!!. and that $6k is only the start of the real cost, it will impact every single purchasable item, especially housing and food, which are both pretty hard to do without. also, Brazil has just discovered the biggest oil find in 30 years, sounds like they are doing their bit to save the planet!!. that will fit in nicely with their policy of clearing rain forest to grow palm oil for the bio fuel hoax. we, the developed countries, will have plenty of bio fuel, and the poorest of the world will starve because they can't afford grain. great solution ..

I agree that petrol is CHEAP in this country compared with say Europe. Gas and diesel are very prominent in Europe.

The distance I drive to work each day would be enough in Europe to get me from 1 side of a country to the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...