Few Dyno Run Vids Of The New 26 And K5-660r

[STATUS]

A few basic videos of the new engine, (old front cut sourced stocky shat an oil pump). Pieced together the thusday night before round two in qld, driven 250km on the friday on the way up (benalla to yass) then run in flat out during competition on sat and sunday

Peak torque is 537.4Nm @ 4707rpm

Peak power is 340.4 @ 7297rpm (this run was stopped early, it made around 355 at 8000 on later runs)

Very basic engine build;

Blitz K5-660R with the smallest rear #7 (have got a #9 to try later, i suspect easy 400kw for those who want a dyno queen)

Blitz 47mm gate (dual outlet)

Blitz D1 exh manifold

Greddy pistons

Greddy pro cams (small)

Kelford springs

Drift H-beam rods

king bearings

Greddy oil pump

Tomei sump baffle

Pro-engines collar

Greddy 1.2mm head gasket

GIZZMO phenolic intake gasket

-10 drain from rear of head

custom block oil restrictors

ARP main studs

ARP head studs

ARP cam studs

PFC D-jetro

GIZZMO MSIBC boost controller

[Angus Smart]

Are they similar to power enterprise turbos? look similar i thinks.??

sounds nice tho

good work Trent!

[Wheezy]

I hear its going back on the dyno very soon, any truth to this?

BTW.....did you get my message yesterday?

[STATUS]

I hear its going back on the dyno very soon, any truth to this?

BTW.....did you get my message yesterday?

did you get mine?

yeah it may go back on to see what the #9 is capaple of, but im booked solid atm and the car is perfect for its purpose wioth the #7 so we will see what happens..... its just a bit of curiosity thats all.

Got all the remap shizzle coming so might do a few GTR remaps on it also for fun.

[GeeTR]

Dang, these K5-660R's make tourqe wide like wizard's sleeve.

[Wheezy]

did you get mine?

yeah it may go back on to see what the #9 is capaple of, but im booked solid atm and the car is perfect for its purpose wioth the #7 so we will see what happens..... its just a bit of curiosity thats all.

Got all the remap shizzle coming so might do a few GTR remaps on it also for fun.

Nah, didn't get it.....stupid vodafone.

I'll call you later tonight.....might go for a drive after tea

[STATUS]

Are they similar to power enterprise turbos? look similar i thinks.??

sounds nice tho

good work Trent!

power enterprise use IHI from memory, blitz use KKK but with turbonetics wheeels in them. Sound is rather sweet, can hear it whistle from the other side of the track....

[unique1]

nice results, so this is about the same as a gt3540 in size i presume?

whats the turbo worth and what flange does it have? are these gonna last long term or havent u tested these turbos over a long period yet?

Edited June 3, 2008 by unique1

[STATUS]

nice results, so this is about the same as a gt3540 in size i presume?

whats the turbo worth and what flange does it have? are these gonna last long term or havent u tested these turbos over a long period yet?

kkk is factory fitted to many supercars like porsche etc but blitz changes the compressor wheels to a specially machined turbonetics combo, the things last ages which is one of the reasons i went this route over a garret, they tend to take more abuse (material going through bearings etc) they are T3 flange but you could probaly buy 2 gt3540's for the price of one K5 but the GT3540 just dont perform any where near as good.

[Shockster0429]

holy torque curve. That thing must come on like a monster at 3.5k-4k. Nice setup!

[unique1]

Thanks Trent for some reason i thought it was one of the KKR china turbos lol, i didnt notice the Blitz bit

[philvia]

those are some nice numbers

i'm quite inspired for my s13 rb26 build now

in fact im gonna copy your build pretty close

except no onevia just a normal bn sports blister silvia

[ULOOOK]

What boost were you running on that run mate?

[STATUS]

What boost were you running on that run mate?

18-19psi

[Beer Baron]

hmm, got me thinking trent. my engnie is just about to go back into the GTR. I want about 350rwkw and lots of joy in the midrange.

I currently have:

HKS GT-SS

tomei expreme mani's

tomei dumps

head work

tomei 260/9.15 cams

full trust super suction kit

etc etc you know most of the spec.

but lately I have been considering an HKS T04Z kit. price is almost the same and it simplifies things a bit. but I do want it to be very responsive. I don't want to strap on the T04Z and find it makes the 350rwkw with just 14psi and makes all it's power up top. I guess what I mean is there is no point using a 400rwkw capable turbo to get 350 if the set-up will be 'lazy'. and by the same token no point using 320kw turbos to try and make 350kw as everything will be stressed.

I'm starting to think this blitz kit may suit. How do you think this kit compares with a T04Z? are they fairly similar in size/trim? and what's the rough price on this bad boy?

[STATUS]

hmm, got me thinking trent. my engnie is just about to go back into the GTR. I want about 350rwkw and lots of joy in the midrange.

I currently have:

HKS GT-SS

tomei expreme mani's

tomei dumps

head work

tomei 260/9.15 cams

full trust super suction kit

etc etc you know most of the spec.

but lately I have been considering an HKS T04Z kit. price is almost the same and it simplifies things a bit. but I do want it to be very responsive. I don't want to strap on the T04Z and find it makes the 350rwkw with just 14psi and makes all it's power up top. I guess what I mean is there is no point using a 400rwkw capable turbo to get 350 if the set-up will be 'lazy'. and by the same token no point using 320kw turbos to try and make 350kw as everything will be stressed.

I'm starting to think this blitz kit may suit. How do you think this kit compares with a T04Z? are they fairly similar in size/trim? and what's the rough price on this bad boy?

here is a comparo. Price is similar to the HKS version not generic garrett (which is only half a T04Z)

i had a look at all 4 players at the size i was after and the K5 seemed on paper to be the pick, its a shame they are not all the same flange as i would be happy to do back to backs on the dyno to give 100% accurate comparo's... maybe if some-one has a T04Z kit laying around we could "run it in" for them

[Beer Baron]

thanks mate, that helps. it seems they are fairly close in wheel size and trim.

So perhaps the HKS T04Z with the smaller 0.61 exhaust housing would be comparable to the blitz turbo you have?

does the blitz turbo or gate run v-band flanges. I am in love with V-band flanges.

[STATUS]

no bingo on the v-band

[TTT]

For those looking for a budget responsive non stroker 26

Blitz K5-660R with the smallest rear #7 (have got a #9 to try later, i suspect easy 400kw for those who want a dyno queen)

Blitz 47mm gate (dual outlet)

Blitz D1 exh manifold

Greddy pistons

Greddy pro cams (small)

Kelford springs

Drift H-beam rods

king bearings

Greddy oil pump

Tomei sump baffle

Pro-engines collar

Greddy 1.2mm head gasket

GIZZMO phenolic intake gasket

-10 drain from rear of head

custom block oil restrictors

ARP main studs

ARP head studs

ARP cam studs

PFC D-jetro

GIZZMO MSIBC boost controller

you could probaly buy 2 gt3540's for the price of one K5

I read the thread twice.

I can't see how this is a budget build.

and I also can't see the dyno vid... just pics.

something removed?

[Beer Baron]

and lastly, do you think the .61 T04Z or the blitz kit would be a good choice for 350rwkw?