Jump to content
SAU Community

Os Twin Plate R32 Gtr

PHA71L
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

yes they are noisy. like 90% of multi-plates they have a loud rattle when the clutch predal is depressed.

are they good? yeah they are pretty good. hard to comment definitively as they make heaps of different twin plates for GTR. sprung centre? solid centre? small plates? larger plates? alloy cover? steel cover? carbon? etc etc.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
yes they are noisy. like 90% of multi-plates they have a loud rattle when the clutch predal is depressed.

are they good? yeah they are pretty good. hard to comment definitively as they make heaps of different twin plates for GTR. sprung centre? solid centre? small plates? larger plates? alloy cover? steel cover? carbon? etc etc.

I had a HKS Twin Plate.

It was either IN or OUT... no play, so parking was annoying.

I was told Twins are not good for daily driving because its purpose was to take hard launches or racing applications.

True?

Yawn Mentor

Yawn

Posted
Posted (edited)

They are ok as long as you dont slip them too much. A little bit is fine as far as im concerned.

And i must say my Exedy Hyper Twin is as quiet as stock whether depressed or not, which is good in a way

Edited by Yawn
DS-ZILR Collaborator

DS-ZILR

Posted
Posted
I have exedy twin and is quiet in or out and is very easy to drive, i've had a few different singles and the twin is better and easier to live with.

my 32 gtr supposibly has a tripple plate hks clutch haven't had it out yet to look but i know its damn stiff and bugger all slip so it on or off. just cruisin and changing from 2nd to 3rd gives a nice thunk if im to quick on the pedal. im trying to make it into a more street friendly machine so am after a clutch that i can has a bit more of travel between on and off and is good in traffic but still tough enough to take the power when needed (its still a stock engine so not rediculous power or anything) Would you rate your exedy as a street friendly yet still tough clutch? if so what model is it? am i better off with a single for what im after?

cheers

msnismo Grand Master

msnismo

Posted
Posted
I had a HKS Twin Plate.

It was either IN or OUT... no play, so parking was annoying.

I was told Twins are not good for daily driving because its purpose was to take hard launches or racing applications.

True?

I have a hks twin in my 200zr... yup definitely takes skill.... daily driving is fine, just dont drag it! Could be cause mine was old though, but it didnt like it!!

I have an ORC twin 709D in my 33... love it! Clutch pedal is just like standard... drives easy and is good for track or drag... highly recommend.. and one of the quietest twins I have had!

Wouldn't recommend slipping a twin too often though, will wear out alot quicker...

GTRsean Grand Master

GTRsean

Posted
Posted

os gikken tripple for the win lol. 100,000k and 4 years daily driver, still going strong lols.

Would like a sprung center though to soften the blow on the gearbox, drivetrain etc when driving hard.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
I have a hks twin in my 200zr... yup definitely takes skill.... daily driving is fine, just dont drag it! Could be cause mine was old though, but it didnt like it!!

I have an ORC twin 709D in my 33... love it! Clutch pedal is just like standard... drives easy and is good for track or drag... highly recommend.. and one of the quietest twins I have had!

Wouldn't recommend slipping a twin too often though, will wear out alot quicker...

I have the HKS twin plate. It does take some skill but takes the punishment. Strangely enough the HKS-USA site claims the design makes it easier to slip and makes for "easier clutch pedal management" :D

Yeah mine was old too and I believe the previous owner drive it hard.

Guess it was just knowing how to work the clutch, like you both said takes skill.

PHA71L Community Regular

PHA71L

Posted
  • Author
Posted

well my single plate was very on off 6 puck brass button..... just want to know if this clutch is going to handle 5 6000rpm dumps?

seems no one is using one?

i have never heard a twin or triple plate clutch befor either.... so the rattle noise will be interesting :)

  • 2 weeks later...
djr81 Grand Master

djr81

Posted
Posted
Twin plate rattle is hardcore and if ure complaining then ure a girl... :(

I have an ORC 709D and have heard OS and HKS twin plates and the ORC is the quietest out of them by a fair bit

It is not so much a matter of complaining as putting up with other people continually asking what the rattle is.

The procedure is simple:

Put gear lever in neutral.

Take foot off clutch.

Ask them what noise?

I have a HKS damped twin plate. Other than for the lightened flywheel it drives like a stocker.

bnr#@ Mentor

bnr#@

Posted
Posted
It is not so much a matter of complaining as putting up with other people continually asking what the rattle is.

The procedure is simple:

Put gear lever in neutral.

Take foot off clutch.

Ask them what noise?

I have a HKS damped twin plate. Other than for the lightened flywheel it drives like a stocker.

So true that, always get that question...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...