Jump to content
SAU Community

Os Twin Plate R32 Gtr

PHA71L
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

yes they are noisy. like 90% of multi-plates they have a loud rattle when the clutch predal is depressed.

are they good? yeah they are pretty good. hard to comment definitively as they make heaps of different twin plates for GTR. sprung centre? solid centre? small plates? larger plates? alloy cover? steel cover? carbon? etc etc.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
yes they are noisy. like 90% of multi-plates they have a loud rattle when the clutch predal is depressed.

are they good? yeah they are pretty good. hard to comment definitively as they make heaps of different twin plates for GTR. sprung centre? solid centre? small plates? larger plates? alloy cover? steel cover? carbon? etc etc.

I had a HKS Twin Plate.

It was either IN or OUT... no play, so parking was annoying.

I was told Twins are not good for daily driving because its purpose was to take hard launches or racing applications.

True?

Yawn Mentor

Yawn

Posted
Posted (edited)

They are ok as long as you dont slip them too much. A little bit is fine as far as im concerned.

And i must say my Exedy Hyper Twin is as quiet as stock whether depressed or not, which is good in a way

Edited by Yawn
DS-ZILR Collaborator

DS-ZILR

Posted
Posted
I have exedy twin and is quiet in or out and is very easy to drive, i've had a few different singles and the twin is better and easier to live with.

my 32 gtr supposibly has a tripple plate hks clutch haven't had it out yet to look but i know its damn stiff and bugger all slip so it on or off. just cruisin and changing from 2nd to 3rd gives a nice thunk if im to quick on the pedal. im trying to make it into a more street friendly machine so am after a clutch that i can has a bit more of travel between on and off and is good in traffic but still tough enough to take the power when needed (its still a stock engine so not rediculous power or anything) Would you rate your exedy as a street friendly yet still tough clutch? if so what model is it? am i better off with a single for what im after?

cheers

msnismo Grand Master

msnismo

Posted
Posted
I had a HKS Twin Plate.

It was either IN or OUT... no play, so parking was annoying.

I was told Twins are not good for daily driving because its purpose was to take hard launches or racing applications.

True?

I have a hks twin in my 200zr... yup definitely takes skill.... daily driving is fine, just dont drag it! Could be cause mine was old though, but it didnt like it!!

I have an ORC twin 709D in my 33... love it! Clutch pedal is just like standard... drives easy and is good for track or drag... highly recommend.. and one of the quietest twins I have had!

Wouldn't recommend slipping a twin too often though, will wear out alot quicker...

GTRsean Grand Master

GTRsean

Posted
Posted

os gikken tripple for the win lol. 100,000k and 4 years daily driver, still going strong lols.

Would like a sprung center though to soften the blow on the gearbox, drivetrain etc when driving hard.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
I have a hks twin in my 200zr... yup definitely takes skill.... daily driving is fine, just dont drag it! Could be cause mine was old though, but it didnt like it!!

I have an ORC twin 709D in my 33... love it! Clutch pedal is just like standard... drives easy and is good for track or drag... highly recommend.. and one of the quietest twins I have had!

Wouldn't recommend slipping a twin too often though, will wear out alot quicker...

I have the HKS twin plate. It does take some skill but takes the punishment. Strangely enough the HKS-USA site claims the design makes it easier to slip and makes for "easier clutch pedal management" :D

Yeah mine was old too and I believe the previous owner drive it hard.

Guess it was just knowing how to work the clutch, like you both said takes skill.

PHA71L Community Regular

PHA71L

Posted
  • Author
Posted

well my single plate was very on off 6 puck brass button..... just want to know if this clutch is going to handle 5 6000rpm dumps?

seems no one is using one?

i have never heard a twin or triple plate clutch befor either.... so the rattle noise will be interesting :)

  • 2 weeks later...
djr81 Grand Master

djr81

Posted
Posted
Twin plate rattle is hardcore and if ure complaining then ure a girl... :(

I have an ORC 709D and have heard OS and HKS twin plates and the ORC is the quietest out of them by a fair bit

It is not so much a matter of complaining as putting up with other people continually asking what the rattle is.

The procedure is simple:

Put gear lever in neutral.

Take foot off clutch.

Ask them what noise?

I have a HKS damped twin plate. Other than for the lightened flywheel it drives like a stocker.

bnr#@ Mentor

bnr#@

Posted
Posted
It is not so much a matter of complaining as putting up with other people continually asking what the rattle is.

The procedure is simple:

Put gear lever in neutral.

Take foot off clutch.

Ask them what noise?

I have a HKS damped twin plate. Other than for the lightened flywheel it drives like a stocker.

So true that, always get that question...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...