Jump to content
SAU Community

Recommended Posts

just recently my car isnt starting without the need of a jumpstart. (r33gtst) i went to bob jane and checked it out. battery is perfect, alternator is perfect.

came up as an error though as power drain or something like that.

this has got me puzzled.

what could it be?

Link to comment
https://www.sau.com.au/forums/topic/223779-car-keeps-needing-jumpstart/
Share on other sites

Have you checked the battery terminals?

Loose earth cable?

Happened to me couple of days ago, resulting in new terminals.

These two things that springs to mind with situation like this.

Hope it helps

Cheers

Grant

i had this problem in my old vk... (P.O.S. btw)

turned out it was dirty battery terminals... the battery was leeking some shit out (whitish in colour) that was coating them and preventing it connecting...

wash in hot water see if fixes :thumbsup:

also check all your belts for slipping

Yep, what you want to do is like GTR-ben said, grab a multi meter and use the amps setting and do some testing.

Another good place to test is your fuse box, when the car is off, pull a fuse on a circuit and use the multi meter probes to bridge the gap and if the car is off you should get next to nothing. (Make sure the probes are in the AMPS terminals of the meter, because they are usually different to the volts terminals)

Common things that do cause current draw when the car is off are internal lights, alarms and shorts to earth.

So that should at least allow you to find which circuit is draining ur battery overnight.

Hope that helps dude.

How old is the battery? Just because it checks out as ok doesn't mean it's accepting and holding charge. Check the battery voltage before you even crank the engine. Then check it while you crank the engine.

Is the alternator working properly, and the regulator. If the regulator (built into the alternator) is cactus, then it might be overcharging the battery. And batteries don't like being overcharged.

i went to bob jane and checked it out. battery is perfect, alternator is perfect.
How old is the battery? Just because it checks out as ok doesn't mean it's accepting and holding charge. Check the battery voltage before you even crank the engine. Then check it while you crank the engine.

Is the alternator working properly, and the regulator. If the regulator (built into the alternator) is cactus, then it might be overcharging the battery. And batteries don't like being overcharged.

Hmmm, that is odd, batteries dont normaly last 12 yrs, i have an odyssey that is only a few yrs old and had to replace that on the weekend, you should here it spin up now with a 1000cca dry cell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...