Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

to the dude with the foggies on the S1 r33, were they oem or did you put them on yourself?

that was leigh he use to have the r33 4 door but i think he picked it up the other night and the foggies were already on the car. I WANT THEM!!!!!

Great night! First cruise with the club and loved every moment of it! Definately going to attend the east meets west cruise. Hope the guy in the white r33 who got pulled up just after the end of the cruise got away alright.

Thanks for a great night.

to the dude with the foggies on the S1 r33, were they oem or did you put them on yourself?

that would of been me, when i got the car they were already on, same with my old 4 door 33 (maybe its a n.a thing?).

was a good night! had alot of fun great cruise, i didnt really want to push a 3 day old car much so i sorta was near the back of the group :)

A guy in a white R33 GTR got pulled up on Burwood HWY. I was behind him at a set of lights and a cop car was next to us bout to turn right. The lights went green an he left the lights not to quckly but sort of just enough to get a tiny bit of boost in first then changed to second n just cruised. the cop must've heard him and quickly pulled across from the right turn lane nearly cleaned me up and chaced after him. The GTR wasn't going quickyl so he got behind him then forced him to change through 3 lanses of traffic (built up cos we had all just left the lights) and down a side street. Hope nothing became of it cos he wasn't speeding and wasn't dragging or launching or anything. Only thing he could've got done for would've been mods so hope she was clean.

And now,

Thanks for the cruise wayne it was my first proper cruise with the club and definatly enjoyed it. I had not been through mos of those roads before and loved it. Also is there any chance of getting a bit of an outline map jus so i can make my way back there again. Thanks again for organising everything was great fun.

A guy in a white R33 GTR got pulled up on Burwood HWY. I was behind him at a set of lights and a cop car was next to us bout to turn right. The lights went green an he left the lights not to quckly but sort of just enough to get a tiny bit of boost in first then changed to second n just cruised. the cop must've heard him and quickly pulled across from the right turn lane nearly cleaned me up and chaced after him. The GTR wasn't going quickyl so he got behind him then forced him to change through 3 lanses of traffic (built up cos we had all just left the lights) and down a side street. Hope nothing became of it cos he wasn't speeding and wasn't dragging or launching or anything. Only thing he could've got done for would've been mods so hope she was clean.

And now,

Thanks for the cruise wayne it was my first proper cruise with the club and definatly enjoyed it. I had not been through mos of those roads before and loved it. Also is there any chance of getting a bit of an outline map jus so i can make my way back there again. Thanks again for organising everything was great fun.

yeah that was me.

like restless 33 said i wasn't speeding or dragging or launching, it was only the usual breath check etc

so it is all good :)

Well im glad you all enjoyed the night..

It was my first cruise that i had put together. So i will learn by my mistakes.

As it turned out we had 29 cars there were 34 members there and with a few mates that came along

for the ride made about 50 people there on the night..

I took some pics but being night they came out crap.. :)

So if anyone got some good pics put them up...

It was also great to see a lot of new faces there and 4 guys joined up on the night

So to those 4 welcome to SAUvic..and i hope to see you all at a lot more events..

To the girl who turned GREEN and chucked in the car ..Next time bring a bucket.. :ninja:

For those of you who didnt come

We left Pakenham and headed up in to the hills up in to Cockatoo all the way up to the

Warburton Hwy then down the tisties in to Gembrook across to Emerald past a Boose Bus then

Up In to Mombolk up past the Silvan Reservoir then on to the Mt Dandy Tourist road down imto

Ferntree Gully were we finished ..

Anyway as i said im glad you all enjoued it

So see ya all next time..

Wayne

Events Co-Ordinator.

I think they might have just missed us if they head up there now....

We had a cop car pass us when we were parked on the street at 11-12am in gembrook, didn't stop just kept on going. Then passed 2-3 police cars whilst driving, no trouble again.

given recent events with police knowing details of events/meetings, perhaps not post the route taken??

just a thought, might be just paranoid....

yeah we went past quite a few cops, as usual no issues ;) (at least i've never had any issues on an official sau vic cruise)..

30 cars, top effort! Unfortunately I couldn’t make it but I will be about Friday night @ the E vs W meet :D

Hopefully see double the amount of cars there if my suspicions prove correct :)

given recent events with police knowing details of events/meetings, perhaps not post the route taken??

just a thought, might be just paranoid....

I can only say paranoia mate, no reason not to go into detail. It'll be in the newsletter anyhow so I don’t see a problem.

And there really hasnt been any recent 'event' other than whats been going on since i first purchased a skyline in 02, Police crack down on hoons, dont hoon and no problem!

Sooner people get over the recent level of paranoia the better as its nothing to worry about as I keep saying, and have said for years :(

dezz i was referring to possible use of the route for later events, of course i know it's been run already

and also referring to the recent Monash debacle which is probably the least hooning type event you could possible have, for goodness sakes, the group ends up eating duck and rice!

just putting it out there, that's all...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...