Jump to content
SAU Community

Recommended Posts

Hi all,

Im trying to pick a tyre from the Federal range. I have two options:

Federal SS-595 255/40 R17 96W

post-32255-1213810386_thumb.jpg

* Low profile sidewalls for ultimate performance

* Excellent comfort characteristics

* Uni-directional tread patter

* Flange protector for alloy rims

* Affordable price

* ZR and VR speed rated

Federal 595 RS 235/40 ZR17 90W TW

post-32255-1213810379_thumb.jpg

New, semi-slick, sport competition 595RS - designed for exceptional traction and grip. Cutting-edge technological advances in design, construction, pattern and compounds. Best performance in its class - a street legal competition tire with the characteristics of a slick.

* Evenly dispersed block stiffness, same level of stiffness in the center and the shoulder for stronger grip and traction, prevents irregular wear

* Uni-directional V-shaped main groove enhances streamline form and also improves aquaplaning ability at high speeds. Wide-angled grooves increase block stiffness, further enhancing tire's grip and traction

* Engraved pattern name along the groove creates an exquisite product image

* Sub-grooves on the shoulder disperse block stiffness, improving ride comfort, grip and traction

* Complete block stiffness provides excellent lateral stability in cornering

Now the SS-595 is a high performance street tyre with a width of 255. While the 595RS is a semi slick but with a width of only 235.

Would the extra width of the SS be better than getting the RS?

They will be going on a set of 17x8.5 wheels for the track.

Link to comment
https://www.sau.com.au/forums/topic/224552-help-me-choose-a-federal-tyre/
Share on other sites

take the RS if ur doing track

Im running 595 ss on my r33 gts t. only 6 or 7 months old... and they are shit for grip. especially in the wet.

Im running 235 at front and 255 at back, even with the extra width fails to hold under high load/revving/boost.

Cant imagine running SS on track... waste ur time and fuel.

Not sure on RS never used them b4, but i have heard good things.

Edited by br3ndan

just bought a full set of federal RS 235/45/17 for my r33 gtst. so far so good, traction isn't an issue with 280rwkw. taking it to the wakie track day this saturday, i'll let you know how they perform there shortly :ninja:

why does it have to be federals? there are plenty of other tyre options out there, and to be honest the federals haven't impressed me all that much, except that they are dirt cheap.

why does it have to be federals? there are plenty of other tyre options out there, and to be honest the federals haven't impressed me all that much, except that they are dirt cheap.

Cheap,yes they are. just wanted to get peoples opinions of them,especially the RS ones.

I've been using the R's for quite some time now and IMO they rok. No they are not capable of the same lap times as some of the more fancied semi's available but they are unpteen times more durable and are still streets ahead of any street tyre for grip.

I would rate them in between good street rubber and high end semi's for grip And with 16000 kays, several track days and other sheanigans on board mine are still going strong.

Definitely one of the better compromise tyres out there considering the cost versus performance versus durability.

The 235/45-17 rs cost almost as much as a 235/45-17 RE55. If you have a set of track only rims you will be a lot happier with the re55 (as in once you figure out how to drive around wakefield properly about 3 seconds a lap happier)

I have 225 RS's on the front of mine for street duty and the occasional wet track day where they are excellent but as soon as the dry line appears the re55's go on as they are that much grippier.

Another thing worth considering is the deeper tread depth of the street tyre, smaller tread blocks and softer sidewall don't feel very nice when you are really pushing and you tend to melt/feather the edges of the blocks a lot easier too. You will probably overheat the tyre so grip falls away further, it will happen sooner in the street tyre than the proper semi.

i wouldn't even consider the SS for anything other than street duties.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...