Jump to content
SAU Community

Recommended Posts

yep a trip to nissan so they can look it up and progam a key to it.

I can't remember when I did that car but it *should* have gotten two immobiliser tags. if not tell me and I can arrange a spare one.

yeah there was 2 little plastic immobiliser tags.. i don't remember any numbers on them tho... they were removed when i had the new alarm put in.. i think i know where they are tho..

if i have them tags will i need to get this code from Japan that everyone's talking about??

im getting lost now? i thought the tags were metal with a code on them?? or are these plastic ones that were on my keys something different?

Edited by GeNOS
  • 4 weeks later...

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

You all dat?

  • 2 weeks later...

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

nIpKO.jpg

MH7GB.jpg

Cheers,

Ross

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

/Snip/

Cheers,

Ross

Hey,

I have a R34 here, same looking key as yours, was going to get a spare, asked Nissan and they quoted me $550 for the key, but he said I could buy it in separate parts if that helped LOL.

that is a patrol key.

I can get them fairly easily and they are not $550..

That's odd, probably a different key, I was quoted $550 for the whole key, the guy printed out a sheet with an exploded view on it with all the individual parts totaling $550.

So I just went with the normal blank key for $10.

GGKAREAR34EDA-CF--

R34

9807

QM1G

RB25DE

4SPD AUTO

in which case part number is:

H0564-C9920

that is the full assy.

last one I bought was $300.

Ohh, thanks for that, I still remember when I asked him to check the prices for me, he told me it would be expensive (I was expecting around $200), but got quite a shock when he told me it would be over half a grand for a key :laugh:

So would I give this:H0564-C9920 part number to Nissan to order or ??

I will try and make this key last as long as it can, but the last owner from Japan seemed to have pressed the buttons with his/her nails :dry:

:cheers:

Hey Guys,

I am after some assistance from anyone who can tell me where is the best place in Melbourne to get a spare Key.

I have Just been to Nissan Brighton who quoted $453 to get a blank key and then said $150 to reprogram.

This is obviously expensive but from reading this thread seems to be standard from Nissan and I have searched ebay, import monster etc but cant seem to find a spare second hand.

Only problem is they told me they can't guarantee that the Reprogram will work but will charge me the $150 regardless.

I am having my alarm system replaced also as I only have one remote and can't seem to find a replacement remote due to it being a Chinese Brand Alarm currently fitted. Will replacing the alarm cause any dramas with the factory key / immobilizer?

Any help would be greatly appreciated

Regards,

Noel.

Hi - I have just had a spare key supplied by a local locksmith for my V35 coupe. The key doesn't have the remote function but it has the transponder in it so I can enter the car (which turns off the immobiliser) and start the car. He also supplied a valet key.

I did not have a key code, he has a reader which produces a serial number which then can be programmed into the transponder key.

Total cost = $125.

However if you lose your one and only key and don't have a key code, you can expect to pay about $1300 for a replacement. At least that is what it costs for and X-Trail which uses a similar security set up and key codes.

A word of warning - don't hide your spare key under the car (especially in a magnetic box)as most thieves can find it in about 30 seconds with a mirror and LED light. And the magnetism will affect your transponder inside the key.

I'm located in regional SE Qld so most metro cities should have similarly equipped locksmiths getting around the place. So don't get ripped off.

Cheers - Neil

does anyone know someone local to brisbane (southside) that can do this??

i dont need any buttons on my key, just something to unlock and start car.

  • 9 months later...

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

why yes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...