Jump to content
SAU Community

Spare Keys

Aj007
 Share

Recommended Posts

  • Replies 229
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

MikeMcL
MikeMcL

Hi all Well a very happy ending for me!! Went to Main North Nissan here in Adelaide and spoke to Josh (excellent friendly service!!) and they coded the new remote and keys no problem!! Strange thi

Posted Images

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

yep a trip to nissan so they can look it up and progam a key to it.

I can't remember when I did that car but it *should* have gotten two immobiliser tags. if not tell me and I can arrange a spare one.

GeNOS Collaborator

GeNOS

Posted
Posted (edited)

yeah there was 2 little plastic immobiliser tags.. i don't remember any numbers on them tho... they were removed when i had the new alarm put in.. i think i know where they are tho..

if i have them tags will i need to get this code from Japan that everyone's talking about??

im getting lost now? i thought the tags were metal with a code on them?? or are these plastic ones that were on my keys something different?

Edited by GeNOS
  • 4 weeks later...
TomR33 Collaborator

TomR33

Posted
Posted

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

superspit Mentor

superspit

Posted
Posted

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

You all dat?

  • 2 weeks later...
dissss Rookie

dissss

Posted
Posted

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

nIpKO.jpg

MH7GB.jpg

Cheers,

Ross

Converge Community Regular

Converge

Posted
Posted

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

/Snip/

Cheers,

Ross

Hey,

I have a R34 here, same looking key as yours, was going to get a spare, asked Nissan and they quoted me $550 for the key, but he said I could buy it in separate parts if that helped LOL.

Converge Community Regular

Converge

Posted
Posted

that is a patrol key.

I can get them fairly easily and they are not $550..

That's odd, probably a different key, I was quoted $550 for the whole key, the guy printed out a sheet with an exploded view on it with all the individual parts totaling $550.

So I just went with the normal blank key for $10.

Converge Community Regular

Converge

Posted
Posted

GGKAREAR34EDA-CF--

R34

9807

QM1G

RB25DE

4SPD AUTO

in which case part number is:

H0564-C9920

that is the full assy.

last one I bought was $300.

Ohh, thanks for that, I still remember when I asked him to check the prices for me, he told me it would be expensive (I was expecting around $200), but got quite a shock when he told me it would be over half a grand for a key :laugh:

So would I give this:H0564-C9920 part number to Nissan to order or ??

I will try and make this key last as long as it can, but the last owner from Japan seemed to have pressed the buttons with his/her nails :dry:

:cheers:

Noel44 Apprentice

Noel44

Posted
Posted

Hey Guys,

I am after some assistance from anyone who can tell me where is the best place in Melbourne to get a spare Key.

I have Just been to Nissan Brighton who quoted $453 to get a blank key and then said $150 to reprogram.

This is obviously expensive but from reading this thread seems to be standard from Nissan and I have searched ebay, import monster etc but cant seem to find a spare second hand.

Only problem is they told me they can't guarantee that the Reprogram will work but will charge me the $150 regardless.

I am having my alarm system replaced also as I only have one remote and can't seem to find a replacement remote due to it being a Chinese Brand Alarm currently fitted. Will replacing the alarm cause any dramas with the factory key / immobilizer?

Any help would be greatly appreciated

Regards,

Noel.

GeNOS Collaborator

GeNOS

Posted
Posted

Hi - I have just had a spare key supplied by a local locksmith for my V35 coupe. The key doesn't have the remote function but it has the transponder in it so I can enter the car (which turns off the immobiliser) and start the car. He also supplied a valet key.

I did not have a key code, he has a reader which produces a serial number which then can be programmed into the transponder key.

Total cost = $125.

However if you lose your one and only key and don't have a key code, you can expect to pay about $1300 for a replacement. At least that is what it costs for and X-Trail which uses a similar security set up and key codes.

A word of warning - don't hide your spare key under the car (especially in a magnetic box)as most thieves can find it in about 30 seconds with a mirror and LED light. And the magnetism will affect your transponder inside the key.

I'm located in regional SE Qld so most metro cities should have similarly equipped locksmiths getting around the place. So don't get ripped off.

Cheers - Neil

does anyone know someone local to brisbane (southside) that can do this??

i dont need any buttons on my key, just something to unlock and start car.

  • 9 months later...
o2bfit Contributor

o2bfit

Posted
Posted

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

superspit Mentor

superspit

Posted
Posted

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

why yes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...