Jump to content
SAU Community

Recommended Posts

Yes I have searched,

I am wondering there are a couple of "cheaper style" ones on these forums being sold and I wanted to know is it worth it in buying these or go for a known brand, I have heard stories of the aluminum on the tips being too soft and wearing too fast anyone had experience with this. I am doing a 100k service soon and would be a worthwhile upgrade. Now I have just put the car in for a power FC tune in a perfect world I spose I should have put them on before the tune, how much difference will it make if I just put the car on the dyno and dial in the gears rather than have them tuned with the ECU.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/
Share on other sites

No point playing with the cam gears and not the tune

Your not making the most of it so you'd be better off with a tune and no gears, thats how i see it anyhow.

Also whats the setup? You might not even get a gain from a gear :P

The old HKS ones are the ones that have the issue, so even the big name brands have problems mate :down:

I'd just get some from the traders here on the forum, more appropriately priced that some of the jap stuff for the purpose

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001339
Share on other sites

My mods are, Power fc, exhaust from the front pipe back and K&N filter (RB26 engine). Will be putting some garret -7's (or similar) on in about 6 months, or at least some stage in the future. Hmm well if there is no use in getting them then maybe just do without? Its a reasonably easy job when the timing belt is off so just thought it would be a good upgrade to do at this time.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001377
Share on other sites

haha like Ash said, it was the name brand cam gears that had the problem (HKS) and they are sorted out now. We run JJR ones on one car, and an even cheaper unbranded one on another car, they work exactly like the ones that cost x3

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001393
Share on other sites

i pretty much have the same set up as you....

just got cam gears installed and poowerfc installed and tuned...

the cam gears were just a set which my workshop used from thier supplier (no name)

i gained about 50rwkw was about 200 and know after dyno it got 250rwkw. (with 13psi)

i'm actually a bit worried, cause that figure seems a bit high for just exhaust mods and air intake.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001675
Share on other sites

Thanks paulr33, The first ones on there are remarkably like one being sold on these forums, which relates back to which ones to get The ones sold on here are $170 and see no visible difference in them and the one on ebay so should I stay clear of the ones being which look similar. Maybe I will just order some from japan

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4002143
Share on other sites

  • 2 weeks later...

Does anyone have any experience with these Cam gears?

http://www.skylinesaustralia.com/forums/Rb...rs-t225850.html

I can't tell the difference between them and the branded ones, so what should I look out for?

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4037391
Share on other sites

Stock internals dont matter at all.

Like some of the guys said above, cheap (but not crappy) cam gears are a cost effective mod even at low levels of mods on a gtr,

but make sure you get the car tuned and the cams dialed in otherwise no gains.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4038058
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...