Jump to content
SAU Community

Cam Gears

cefiro

By cefiro,
in Engines & Forced Induction

 Share

Recommended Posts

cefiro Experienced

cefiro

Posted
Posted

Yes I have searched,

I am wondering there are a couple of "cheaper style" ones on these forums being sold and I wanted to know is it worth it in buying these or go for a known brand, I have heard stories of the aluminum on the tips being too soft and wearing too fast anyone had experience with this. I am doing a 100k service soon and would be a worthwhile upgrade. Now I have just put the car in for a power FC tune in a perfect world I spose I should have put them on before the tune, how much difference will it make if I just put the car on the dyno and dial in the gears rather than have them tuned with the ECU.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

No point playing with the cam gears and not the tune

Your not making the most of it so you'd be better off with a tune and no gears, thats how i see it anyhow.

Also whats the setup? You might not even get a gain from a gear :P

The old HKS ones are the ones that have the issue, so even the big name brands have problems mate :down:

I'd just get some from the traders here on the forum, more appropriately priced that some of the jap stuff for the purpose

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001339
Share on other sites
cefiro Experienced

cefiro

Posted
  • Author
Posted

My mods are, Power fc, exhaust from the front pipe back and K&N filter (RB26 engine). Will be putting some garret -7's (or similar) on in about 6 months, or at least some stage in the future. Hmm well if there is no use in getting them then maybe just do without? Its a reasonably easy job when the timing belt is off so just thought it would be a good upgrade to do at this time.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001377
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

haha like Ash said, it was the name brand cam gears that had the problem (HKS) and they are sorted out now. We run JJR ones on one car, and an even cheaper unbranded one on another car, they work exactly like the ones that cost x3

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001393
Share on other sites
locoloc Community Regular

locoloc

Posted
Posted

i pretty much have the same set up as you....

just got cam gears installed and poowerfc installed and tuned...

the cam gears were just a set which my workshop used from thier supplier (no name)

i gained about 50rwkw was about 200 and know after dyno it got 250rwkw. (with 13psi)

i'm actually a bit worried, cause that figure seems a bit high for just exhaust mods and air intake.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4001675
Share on other sites
cefiro Experienced

cefiro

Posted
  • Author
Posted

Thanks paulr33, The first ones on there are remarkably like one being sold on these forums, which relates back to which ones to get The ones sold on here are $170 and see no visible difference in them and the one on ebay so should I stay clear of the ones being which look similar. Maybe I will just order some from japan

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4002143
Share on other sites
  • 2 weeks later...
JimmyRickard Mentor

JimmyRickard

Posted
Posted

Does anyone have any experience with these Cam gears?

http://www.skylinesaustralia.com/forums/Rb...rs-t225850.html

I can't tell the difference between them and the branded ones, so what should I look out for?

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4037391
Share on other sites
Kranker Collaborator

Kranker

Posted
Posted

Stock internals dont matter at all.

Like some of the guys said above, cheap (but not crappy) cam gears are a cost effective mod even at low levels of mods on a gtr,

but make sure you get the car tuned and the cams dialed in otherwise no gains.

Link to comment
https://www.sau.com.au/forums/topic/227305-cam-gears/#findComment-4038058
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...