Jump to content
SAU Community

Recommended Posts

the whole idea of a high octane fuel is so the engine wont detonate on boost. Higher octane fuel burns cooler and faster? (from memory)

the tune is probably run for 95

it would be possible to run 91 i guess but i dont think ud ever be able to hit boost and it would be really unsafe anyway

Edited by Boostin96

r34 still uses an rb25det as does my R33 series 2, i put 91octane in once about 5 months ago when there was a shortage of premium fuel available in NSW, the car did run but not well..... had idle problems and had allot less power and the car never really ran the way it did untill yesturday when i flushed out the throttle body, changed the spark plugs and lifted the idle alittle...... the car can run on 91 but its not recommeded

You'll be able to run it on 91 octane fuel. With the car running good or efficiently is a different issue.

Just tell your dad that if he's gonna run it on 91 octane fuel, he risks blowing the motor and he'll get shittier Ks done compared running it on 95 or 98. It seems to work for my parents! :)

Edited by adam-__-

If he wants a skyline, he should be prepared to pay for it otherwise its going to cost a alot to fix when things go wrong. They arent cheap cars to run.

At the lowest oct 95. If not oct 98.

Im a uni student and even i pump my skyline with bp ultimate 98 without fail.

just my 2 cents =)

i'll slap anyone who uses shell aswell,,,,,, i find it not as good as bp and caltex 98, car runs alittle rougher..... except for shell v power racing but i cannot find it anymore

R34 GTT is much newer than R33 GT's and i WILL NEVER run anything that is lower than 97 on it. My B13 uses 92 so if you wanna pump something that uses 91 get a B13 or equivalent. No offense here, just that it's such a waste to ruin a nice RB25DET cause of cheap fuel :D

AND

On another note, No-one is gonna leave a GTT stock forever :)

Edited by teng

true teng,,,, also i only used normal fuel ONCE because there was nothing around and had no choice....lol im an idiot but not stupid..... also dont be a tight ass on fuel,,,, put good stuff 98 oct in it and its usually less than $5 difference per tank..... $5 X 52 weeks is $260 more to use 98 octane than the 91 octane..... compare this to the probs that can be caused by the cheaper fuel..... new engine.... we looking at in the $1000's......

on that note..... what about the 98octane with 10% ethanol blend???? there is romours about ethanol destroying engines but from my understanding there was no proof???? ethanol is a natural octane booster and burns more efficient than conventional petroleum and is about 4 cents per litre cheaper, would there be any probs with that alternative??? the petrol companies say there should be no probs with any jap made car that uses a non carburator engine.....

true teng,,,, also i only used normal fuel ONCE because there was nothing around and had no choice....lol im an idiot but not stupid..... also dont be a tight ass on fuel,,,, put good stuff 98 oct in it and its usually less than $5 difference per tank..... $5 X 52 weeks is $260 more to use 98 octane than the 91 octane..... compare this to the probs that can be caused by the cheaper fuel..... new engine.... we looking at in the $1000's......

on that note..... what about the 98octane with 10% ethanol blend???? there is romours about ethanol destroying engines but from my understanding there was no proof???? ethanol is a natural octane booster and burns more efficient than conventional petroleum and is about 4 cents per litre cheaper, would there be any probs with that alternative??? the petrol companies say there should be no probs with any jap made car that uses a non carburator engine.....

I used just the standard E10 91RON stuff once on a 98RON tune. It was crap, well it drove fine driving normally but once you put it under any kind of moderate load and boost......instant ping. But the cruising economy did well kms wise. I won't be using it anytime again though.

the whole idea of a high octane fuel is so the engine wont detonate on boost. Higher octane fuel burns cooler and faster? (from memory)

the tune is probably run for 95

it would be possible to run 91 i guess but i dont think ud ever be able to hit boost and it would be really unsafe anyway

Higher octane burns slower (i'm not sure if it burns hotter or colder). The reason for pinging is the fuel burns "too fast" - most of the energy in the fuel is depleted well before hitting top dead center - therefore not giving the maximum kick.

That is why the car will ping if the ignition is advanced (fired earlier).

my old man is possibily selling his commodore and he's thinking of buying a dead stock r34 gtt. now could he run 91 octane in it? because i doubt he will want to run it on 98 all the time.

cheers guys

Not a good idea, the R34 gtt requires 98 as a minimum (even though it says 95 - fuel is variable - always anticipate 2 octane points lower eg. your 95 fuel could go down to 93). 2 main reasons to go 98 - Firstly it is turbo and secondly the RB25DET NEO has higher compression than the previous GTTs.

I own an R34 RB25 non turbo and I found that if I use 95 there is slight pinging on hills and my consumption seems to rise by about 2 liters per 100. I also drive fairly lightly. So I use nothing lower than 98 (unfortunate because of the price of fuel - however it is good insurance against my engine going pop).

It will be worse on a GTT.

At the end of the day buying a GTT and running it on regular 91 is a waste of money, as you will always not want to have it on boost, effectivly having worse performance and economy than a non-turbo model.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...