Jump to content
SAU Community

Recommended Posts

I hope to compete in Targa Tas and/or Dutton next year but it all depends on time (work wise) and the good old $$$. I will be competeing in my trusty R32 GTS-t that im currently building, just going to compete not going to win (that will be later once i can get the a gtr)

I have a lot of plans but unfortunately not a lot of them are as solid as I'd like them to be at this stage. LOL

So much depends on so many things for me. The only thing I know for sure is I'm doing Dutton W.A. in a couple of weeks.

From there many things are possible. If we do very well in W.A. and it means we have a shot for the Dutton National Championship I'll probably try and find the coin to do NSW in November.

However after Dutton in a couple of weeks my main motorsports forcus will be to do the Targa Rookie next year. But that also means turning the car into Targa Spec which will take time and $$$. So if we don't do great in W.A. I'll look into getting the car sorted and then depending on time and $$$ I might try and look at doing Mt Buller in November as a learning curve for Targa (I'd do Buller just to learn - not to do well which means I could hopefully have a more serious crack at Targa Rookie in 09).

But - and there's always a but - we have some pretty big things going on here at work and it may mean I won't have the funds to do anything so time will tell. But in a perfect world I'll either be doing Dutton NSW or Mt Buller in November and Targa next year.

I am hoping to compete in Dutton - NSW round in November in my R32 GTR, If that falls through will definately be competing in 2009 and hope to do a interstate round.

Would love to try a Targa as co driver or navigator but think I am a couple of years off that yet. Actually would love to just go to spectate!! :)

What is Mt Buller Snowy?

Greg was telling me Indy Rally in QLD was suppose to be pretty good http://www.motoringevents.com.au/tdc/index.htm its next month and half the price of dutton :thumbsup: wish I knew about it sooner!

Ok good stuff guys! I'm considering doing the "Tasmanian Tarmac Challenge" in October if I can get the new car sorted out, Mt Buller if funds/time allow, and really aiming towards Targa Tasmania again next year in April. Rally Tasmania in February is always a great warmup for Targa Tasmania, but I just can't afford to do them all, time or money wise :thumbsup:

Makes me think actually, I better get on a diet so the poor lil' RB20 can drag me up the hills. Nah, easier to get co-driver whore Timmay to drop down to a sparrow-like 55kg I reckon. :)

http://www.mtbullersprint.com/

A good place to crash apparently.

Thanks, Looks good!! Would be a good one to do for me to start learning navigating :)

Accidents happen, human's make mistakes :) that's motorsport!

but at mt buller the accident can be fatal as we learned last year. One of the issues with buller is that it doesn't run to tarmac rally regs so there are some very very quick cars competing there.

Kel is in the silly seat for Steve next year in the r32. I am wearing the cat suit and cheering along....will be a couple of years before we have the budget to do it against ourselves.

Andrew....I suggest you look very seriously at buying an existing targa gtr instead of de-speccing yours. Targa spec is very slow and compromised compared to what you already have, which means you end up with a car that is only useful for targa. Built 32gtrs are around $30k which is very cheap for the amount that has been spent on them. This is exactly why I have 2 track gtrs now.

Actually Duncan that was the plan but the new AASA rules for Targa meant my car isn't actually too bad. It's probably not as over the top as many people think it is. Ok so I need smaller turbos's and accessories and a stock cooler and a couple of suspension parts but thats it. The fact that things like my oil cooler and engine etc are all fine under the new rules means the total cost to get my car to spec is less than $10K. And I am comfortable with my car so it seems like the smarter option than starting from scratch.

Remember my desire to get into tarmac rallies is partly a desire to get away from the pointy end of the fields for a while and all the pressure and expectaion that comes with it. I just want to have some fun so if it means I'm not in the fastest car then so be it - I don't care. But I also plan on buying an R35 and using it as a daily for 4-5 years then once I'm settled into how tarmac rallies work maybe turning that into a propper fast tarmac rally car.

Again though plans and reality might not ever meet. LOL

Nope - I've got the quotes and done the maths already for EVERYTHING including cage, suits, kill switches, intercoms etc etc.

Take into account things like turbo swaps are going to cost basically nothing because the ones I have I can sell etc. So I'm talking total out of pocket expenses will be under $10K.

Cool, but i still think you are better buying another car. It would be horrible to see the R34 hammered by an off, which realistically is almost a sure thing. Not because of lack of ability, but not being used to navigators, not knowing your navigator combined with having a big, heavy powerful car.

Gee Roy, you worry too much :D

Plenty of guys have gone into it and never so much as dented a car after years. It's all about controlling the red mist and keeping a margin of error. Let the top 10 guys go and risk life and limb (and car), as most of them are either mega-rich or well sponsored. Snowy has a level head and is more than capable of running his 34 at 8 tenths or so and getting a result. Going in with the right attitude is the key, but of course mistakes can and do happen, witness Duncan's really bad luck. Eeeek!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...