Jump to content
SAU Community

Recommended Posts

Cheers Dunc - I've pretty much got everything on that list except the fuel sampler and the 3L catch can (mine is only about 1.5L). But they are 2 things I really didn't know about. It's hard though when the regs for the rallies I'm doing aren't currently available to know exactly what to do.

Geebuz - I just looked it up and it seems EVERY speed event I've needed the 3L catch can.

I better give back all those club sprint and Dutton trophys. Mind you there's probably been <5% of cars at those events that conform to that one.

You're right Snowy... they need to get onto it pronto and solidify the regs.

Now with both AASA and CAMS, it's increasingly difficult to know which regs we should be building to!

The latest TT/AASA regs arn't even out yet :banana: which makes it even harder.

Edited by sav man

re the fuel sampler....would be a very good idea to fit one now special fuels are banned. There hasn't been much point checking fuel in the last few years when there were no restrictions but it might be different this year.

BTW snowy lucky you are a short arse. We would love to put cross bracing for cage in the roof but we always whack our helmets on them :ninja: I take there are still a few bars coming on that setup

TT and TPW regs are approved and set to go, we are waiting on our web guys to sort out some databasing software for both events websites and they'll be up early next week better than ever!

the fuel sampler isn't formally required anymore, but a good idea to have as it can make drawing a sample easier than a hose down the tank filler.

that guy from the evo forum obviously didn't think that approval to run reduced size rims on the 35 might have actually been granted prior to the last targa tasmania and actully written into last years rules!!... don't you just love people that worry about everyone elses stuff for them!

Edited by t01-100
re the fuel sampler....would be a very good idea to fit one now special fuels are banned. There hasn't been much point checking fuel in the last few years when there were no restrictions but it might be different this year.

BTW snowy lucky you are a short arse. We would love to put cross bracing for cage in the roof but we always whack our helmets on them :) I take there are still a few bars coming on that setup

Yeah there's still all the diagonals and the side intrusions to go in there - was just a running update.

And as for the roof the side-bar is my only concern as I've kept the trim in so it is across a bit. We'll have to see when the seat goes in how we go. But if it is an issue I can lower the seat because as you said I am a short ass (silly seat is lower than the drivers seat currently).

just did 336km of the targa wrest point course today... man i'm wrecked and need beers!

the mazda3 will never be the same... and neither will the tiger snake i didn't quite miss!

yeah i totally agree. For a novice driver a longer stage is much easier - the short ones are over before you get into it and all of a sudden its helmet back off, brain back off and wandering around at the speed limit.

Its novice navigators I'd be worried about on long stages - much bigger chance of getting lost in the notes. I was lucky Kel never came off notes all Targa.

Come on I'm used to Dutton rallies where events are over in 30s. I'm an expert at short stages!

It's the longer ones where the "are we there yet?" factor kicks in that I'm worried about :P

I found doing a lap of the Nurburgring pretty mentally taxing by the end and thats less than 20km's (BTG) so 30km's will be interesting.

well I've never done the burger ring, but I never ran out of interest in side a targa stage lol.... adrenalin lasted long enough each time. I felt wrecked by the end of the day though.

But, comparing it to endurance races it is much easier to stay focussed because it always keeps changing. a 2 hour enduro race stint does get a bit repetitive and I found myself a couple of times wondering what I had done in the last 3 laps.

i saw some of the new website today before i disappeared for a long lunch so i reckon it will be up soon!

the targa tas course is still being worked through, but will form much the same as this year... but day one will be better!

the targa wrest point course will be detailed by weeks end with competitive distances.

i saw some of the new website today before i disappeared for a long lunch so i reckon it will be up soon!

the targa tas course is still being worked through, but will form much the same as this year... but day one will be better!

the targa wrest point course will be detailed by weeks end with competitive distances.

Have heard about a few of the changes and they sound interesting!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...