Jump to content
SAU Community

Recommended Posts

Gotta be able to match it with YT come Targa Matt...

Geez its not enough we have to deal with him 'out there' but now in the Pub as well?? He's probably got some sort of Lambo Mug that allows him to drink faster and be less affected...

what rotors do you have? they are probably warping when the get hot, and going back to shape when they cool down.

DBA 5000 which 'apparently' haven't been too hot due to the heat markings on the top of the rotor. Really need to get myself a laser thermometer and work out how hot it really is..

need to pause your porn downloads first ;)

YT showing only a little bit of commitment

YT and I spent about four hours recce-ing Pelverata on Thursday because we knew it was a "money" stage, and after changing and refining nearly every note, we were both confident that no one would beat them over that stage :D

I'm proud that we were right, 12 seconds quicker than anyone I think?! :D

YT and I spent about four hours recce-ing Pelverata on Thursday

Isn't there a rule somewhere that says you ain't supposed to do that!!? LOL

Kudos to him for the amount of effort he puts into his recce work though. I remember him telling me he watches a minimum 4hrs of video a night in the 4 weeks leading up to Targa in preparation. And he tends to only watch the sections where there are 4+ corners that are 8's and above in a row (if using 1-10).

Last year I drove over 32 of the 41 stages once beforehand and that was it (so 9 stages I never saw at all before I raced them). But I know I suck at the fast stuff and this is why.

I thought you weren't supposed to do more than 2 passes as it is classified as "practicing'?

I know plenty of people do though and that the serious guys spend at least 2-3 weeks down in Tas doing recce before the event. It's a fair commitment to an "amateur" event!

There we go.

Sup regs.

Section F

34. Reconnaissance

c) Limited. "...3 week period prior to the event,reconnaissance is limited to 3 passes on any targa stage..."

I know none of them follow that rule though!

need to pause your porn downloads first ;)

YT showing only a little bit of commitment

nearly blew my eardrums out when I turned the sound on! (earphones at work)

how good does that thing sound! and damn, quick doesn't even describe it... his Nav must be sedated :worship:

There we go.

Sup regs.

Section F

34. Reconnaissance

c) Limited. "...3 week period prior to the event,reconnaissance is limited to 3 passes on any targa stage..."

I know none of them follow that rule though!

I can aabosolutely promise we didn't do more than three passes, seriously! We stopped and talked, walked some, discussed note timing etc..... not practicing :) I'm not saying you're alluding we did, just clarifying we didn't :)

DBA 5000 which 'apparently' haven't been too hot due to the heat markings on the top of the rotor. Really need to get myself a laser thermometer and work out how hot it really is..

Are you suffering any pad buildup? I run the same rotors on mine and they've been quite good.

To be honest, I can sometimes get a vibration even though the rotors have been skimmed, and a guru once told me its because I wasn't working them hard enough, and to just keep abusing them and drive through the vibration until eventually it goes away. True to his word, it worked!

Giant will back me, we had the identical situation in his Evo at Bathurst and punishing them harder made them better!

LOL - I'm not saying you did! :)

I'm just clarifying that there IS a rule that says you can't!

But then there is also a rule that says you must do the speed limit during recce and yet *allegedly* there were a lot of people doing a touch over 60km/hr up and down the Airwalk road last week as well. Probably none of them were doing recce - but there was a dude in a silver VW Golf whose missus must have been giving birth in the back seat or something as he sure was in a hurry! :)

i spottoed the line of mazda bater cars followed by a purple rx7 and a gunmetal r32 gtr with r33 gtr wheels on a truck and trailer. does the gtr belong to someone on here?

That would be our black Skyline which my lovely wife was running at the event (car 832). She was going very well until the motor started to miss Saturday afternoon, finally dieing first stage Sunday. Not sure on the problem yet but heaps of blue smoke from exhaust and oil breather, so maybe piston/rings etc.

Any suggestions on pistons etc for the rebuild from those here smarter than me? I think pistons and a 1mm overbore are now allowed in EM rules? The block is genuine N1 (24U) so hopefully rods and crank are ok?

Many thanks to Adam Spence and the Mazda boys for taking the car back up the Island, and all the other rally people for their help on and off the boat etc.

cheers

paul

YT and I were recce'ing a tricky section, and couldn't work out a way to call the notes quite right, so figured a bit of "Left 4.5 immediate Ron Jeremey" would remind him of the section :) .... Gosh I wish I was there to hear Big John read it..... LMFAO

RonJeremy.jpg

Are you suffering any pad buildup? I run the same rotors on mine and they've been quite good.

To be honest, I can sometimes get a vibration even though the rotors have been skimmed, and a guru once told me its because I wasn't working them hard enough, and to just keep abusing them and drive through the vibration until eventually it goes away. True to his word, it worked!

Giant will back me, we had the identical situation in his Evo at Bathurst and punishing them harder made them better!

Hmmm, could be something i will need to look at/test on a track day. The vibrations were extremely violent though and i was worried too about the 2-piece rotors cracking or damaging the calliper or the wheel studs too push it any harder under brakes. That and if i tried to brake on anything other than a dead straight line the car wanted to 'skip' straight ahead instead of turning.

After slowing for the stop point on just about every stage i stayed off the brakes completely (and tried not to stop rolling for as long as possible) and by the start of the next stage normally the brakes would be fine for the first 3kms or so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...