Jump to content
SAU Community

Recommended Posts

Outright Classic allows ABS? Apparently. What a joke and what will some 'competitors' do to win.

spot on, and that is the tip of the iceberg in classic. all before the cheating even starts.

tells you all you need to know about that competition.

speaking of classic, sav how did you end up in early modern instead of classic? Was that because Marlin Ben upset the porsches a few years back? great work this year in what was probably the cheapest car in the event

spot on, and that is the tip of the iceberg in classic. all before the cheating even starts.

tells you all you need to know about that competition.

speaking of classic, sav how did you end up in early modern instead of classic? Was that because Marlin Ben upset the porsches a few years back? great work this year in what was probably the cheapest car in the event

I started my car 1-2 months after wooster ran his car in classic, then we were kicked out, and ABS was restricted to cars that it was avaliable on when new. Most peoples (and mine) guess is that Rex complained that a cheap datsun was beating his $300,000 Porsche. There was talk that there is external video evidance of Rex's wheels doing the ABS shuffle this year.

A journo I was talking to, said he was talking to another compeditor about my car and the position I was in, in a cheap 2wd. And they responded by telling him how my car is a huge $$ car and has had heeeeeaps of development. I had to laugh considering I'd run on one of the smallest budgets in EM, if not the field.

mr druncan you know that porka drvers are not allowed to be upset

lol... got to love motorsport,cheating and protests from shit drivers who cheat more than everyone else

love it!!!!!!!!!

Was someone running a hiclone ?

i loved the look of his AM diffuser but how it didnt smash every time he gassed it i will never know. Speed boat anyone.

at the end of the day this event is what it is and sheep stations are neither won or lost because of results, every one wins a prize for a reason and winning the event doesnt give you new found glory, but does bring the bitches.

if you arent enjoying the car your in and the challenge infront of you than you will have a bad week and a empty pocket.

If your enjoying the car, the team, the friends and the adventure then the position you finnish is irrelevant. im sure if Sav thought about the likely hood of actually beating R34 GTRs than he would stop running his car but he turns up for the fun of it all. not the bitches.

bring on next year.

I started my car 1-2 months after wooster ran his car in classic, then we were kicked out, and ABS was restricted to cars that it was avaliable on when new. Most peoples (and mine) guess is that Rex complained that a cheap datsun was beating his $300,000 Porsche. There was talk that there is external video evidance of Rex's wheels doing the ABS shuffle this year.

..............................................

My reliable source says that there was no dispute that the porkchop's ABS was fitted and working but, you know, 'winning' so many times is good publicity so......................

i loved the look of his AM diffuser but how it didnt smash every time he gassed it i will never know. Speed boat anyone.

at the end of the day this event is what it is and sheep stations are neither won or lost because of results, every one wins a prize for a reason and winning the event doesnt give you new found glory, but does bring the bitches.

if you arent enjoying the car your in and the challenge infront of you than you will have a bad week and a empty pocket.

If your enjoying the car, the team, the friends and the adventure then the position you finnish is irrelevant. im sure if Sav thought about the likely hood of actually beating R34 GTRs than he would stop running his car but he turns up for the fun of it all. not the bitches.

bring on next year.

I'm not sure what your tryin to say, but fu k it, group reach arounds for everyone!

"If your enjoying the car, the team, the friends and the adventure then the position you finnish is irrelevant"

Of course the enjoyment and participation is the most important part but rolling over to cheaters is OK?

I'm not sure what your tryin to say, but fu k it, group reach arounds for everyone!

i loved the look of Hendys after market diffuser but how it didnt smash every time he gassed it i will never know. [bbecause ]the car was so low and soft in the back it looked like a speed boat[/b].

winning isn't everything

if you arent enjoying the car your in and the challenge infront of you than you will have a bad week and a empty pocket.

Ben is dreaming if he thinks he can beat the R34's and/or get bitches

bring on next year.

translated for Ben

"If your enjoying the car, the team, the friends and the adventure then the position you finnish is irrelevant"

Of course the enjoyment and participation is the most important part but rolling over to cheaters is OK?

At least this year cars were getting stroke tested mid event, it's a move in the right direction. But Rex's ABS has been an ongoing issue for 3 years now

Ah, ok, thanks Benny M.

I noticed the Hendy rear diffuser, looked cool. I dunno how it survived either given the low rea rend.

Stroke testing was VERY welcome. I know some competitors were very gratified that the testing was done. It vindicated their results. Why some people insist on stroking their cars when it's plainly obvious they can't drive for shit escapes me. Spend the money on driving lessons champ.

Re the ABS issue. I don't want to go into a big discussion over it because I get along with and really rate the bloke in question, but I have a long conversation with him and he stated that, while he does have the ABS fitted to the car, he switches it off. I was taking a breath to reply, "yes but surely you switch it on too?" when he quickly added "but but but I also remove the wiring harness to the ABS unit". Take from that what you will.

I'd like to express my gratitude to Messrs Perry and Benson for putting on an awesome Targa. I even enjoyed the two nights in Strahan! Rinadeena in the semi-dry on the way in was a stage of beauty. And new STi's are GOOD THINGS! Me and my mate Rhino really enjoyed our split roles this year. We're still smiling!

Edited by Marlin

I'd like to express my gratitude to Messrs Perry and Benson for putting on an awesome Targa. I even enjoyed the two nights in Strahan! Rinadeena in the semi-dry on the way in was a stage of beauty. And new STi's are GOOD THINGS! Me and my mate Rhino really enjoyed our split roles this year. We're still smiling!

I really enjoyed Rinadeena in my Kia Grand Chancellor mini motel service barge too, although I'm sure the STI might have been just a touch more enjoyable. YT's service crew overtook me like I was going backwards though, that must be where the other spare Lambo engine is kept?

I had a busy week looking after a couple of Porsches of the front engined type, but both finished 10th in their respective competitions (Classic & EM). Leigh in Classic did most of day 3 only using the handbrake after a disc rotor failure and no spare- so a super effort that!

Congrats to the organisers for what looked like a gruelling event, 34 wet stages in the end?

The wife enjoyed the Zero car gig too, bright blue race suits and all!

As Jim Richards said on the 2001 Targa tape I watched last night, "You spend 5 days racing, on the 6th you are glad its over, and on the 7th you start planning for next year" So this being the case, 2 days after the event we heard of a DR30 that was raced in Targa 2001 and has been idle ever since. Negotiations are in place and it should be heading to our shed soon. This is probably the only DR30 that has ever done the event, and it is exactly as it finished except for paint..Looking forward to getting it here, let the planning begin...

I was only watching the 2001 tape the other night, and saw the DR30. I was extracing infomation from those in the know at the targa bar on sun night, to fix the rear end on a DR30.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...