Jump to content
SAU Community

Recommended Posts

Hi guys

i just got home from my court case and im pleased and not pleased with my result, lemme start from the beggining so yous know my story june 4th i was comming down heatherton road in dandenong and turning onto princess hwy its 3 lanes extending into 4, it about a 90 degree turn maybe a ltitl emore room anywya it aint to difficult due to so many lanes anyway it was a wensday night about 1 am and no1 was on the road so i thought mad a nice time to practise some of my drifting, anyway i excelerated abit took the corner reasonably if i might add for my driving skill and to my suprise when i fully turned the corner and straigtend up a police vechele was hiding on the side i guess probly trying to mesure speed, and as u would prosume there lights went on and pulled me over, to cut a long stoy short i was summunsed to court and they said, theyll give me 3 things to do if i Pleed guilty i wont loose my licence so i agreed they were, (1 write an apology letter to the arresting officer for endangering his life due to drivers stupidity. may i add i was nowhere near him. 2) pay a "valenteery" fee of $100 to any charity of my choice 3) and take a safe driving coarse. and show then all this by sept 15th which isnt even a month away

so the purpose of all this was to ask u guys do you know any safe driving school i rang aami they qoueted me like $275 for 2 hours using my car and racv $205 using there vechicle but they have a 4 wekk waiting list and cant squeeze me in any earlier. but i highly doubt u can use a skyline for a safe driving coarse anyway. have any of you done them how much and where cheers!

Link to comment
https://www.sau.com.au/forums/topic/22902-driving-coarse/
Share on other sites

there is a place in kilsyth on either liverpool or colchester road (cant remember which one) called Metec.... i was looking at going there back in the good old days when they used to give you a discount on your insurance premium for having done a 'driving' course :D last i checked it was about $175 dollars....

oh and since you dont have to walk i would say the court case went ok :)

Link to comment
https://www.sau.com.au/forums/topic/22902-driving-coarse/#findComment-491747
Share on other sites

ehehe inark sure is what are they doing up at that time :D ehehehe you pay for your stupidy what if i lost control hit a poll or something. or even side swipped another car and killed some1 its not the police officers fualt its mine for not checking the bushes for hostile creatures hehe :) eehehe you learn from you mistakes thats all i can say young n dumb :)

Link to comment
https://www.sau.com.au/forums/topic/22902-driving-coarse/#findComment-491789
Share on other sites

in some senses risto you were unlucky! back when I was young and dumb I did the same thing (except the cop was coming the other way - not hiding in the bushes). He pulled me over and asked me if I knew why I was being pulled over. he told me it was because "you didnt have your indicator on. dont do it again. And dont drive like an idoit" and he let me go! And it was done leaving the pub car-park.

They're not ALL complete bastards.

Link to comment
https://www.sau.com.au/forums/topic/22902-driving-coarse/#findComment-491855
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...