Jump to content
SAU Community

Recommended Posts

Agreed...

I might have to give Paul a bell, come this time next year for a 26, or 26/30 build come this time next year if local options are no good.

Yeah if its a basic rebuild with nothing tricky (block grouting, port work, stroker etc) i can get them done in 4 weeks...6 tops. Ive seen shops taking 10 months over here and charging around $40 000...its highway robbery!!

every workshop would love a 40k engine job

however there are some people who arent after 700+hp

btw top racing wanted 13k for a rb25 rebuild (basic rebuild)

cp pistons

eagle rods

n1 oil pump

gasket kit

acl bearings

parts were around 5.5k and he said machine work was around 2.5k

that leaves labour to assemble engine/put in car at 5k?

^^^ $5k to assemble an engine and install in a car is cheap mate!

I am getting quoted over that to fit cams, cam cover baffle kit, cam cup stud kit, evc, pfc, water pump, timing belt etc, manifolds, dumps, turbos, fuel pump and injectors on a 33 GTR and change fluids.... oh that includes a tune of course.

Speak to people over east and they are talking $3k tops... Would be cheaper for me to put the car on a truck tranporter to Sydney and back but thhe risk of damage in transit aint worth it I reckon.

At this stage I am looking at going with x-speed who are pricey but I know the job will be done right the first time. UNLESS anyone here has other ideas??

my opinion is to go and check out ALL the big name workshops first. Dont ring or email but rather go down and talk to them. A few places thought i was bullshit or rather a timewaster. While others didnt even return my repeated phone calls. One particular place i waited 2 whole months for a quote but NEVER called me back!!! When i went to top racing i knew it was the right place. I suggest instead of listening to others ( even though nearly all would never of had a rebuild before) go and see yourself.

well I might take that on board, load the boot up with all my crap and go driving around to the various places to get a quote in the flesh to install and tune....

problem is I just found out my car which I thought was booked on the 29 July boat, for some reason did not make the boat and is STILL in japan.....auction was 28 June :D

Edited by R34kid

My prices start at $4K for 'basic' rebuild including machining and head service...plus parts. I also charge $1.5K to R & R the engine. $2500 for machining on a basic rebuild is excessive by almost $1000 if it doesn't include porting or fitting of new valve guides. Some of the bills ive seen from other workshops over here are unbelieveable. One totalled over $28,000 for a RB26 build and a gearbox overhaul. This bill was labour only and included no parts...the total bill exceeded $40,000. I could build the whole bloody car for a $28,000 labour build....some of these guys need locking up!

Edited by DiRTgarage
^^^ $5k to assemble an engine and install in a car is cheap mate!

I am getting quoted over that to fit cams, cam cover baffle kit, cam cup stud kit, evc, pfc, water pump, timing belt etc, manifolds, dumps, turbos, fuel pump and injectors on a 33 GTR and change fluids.... oh that includes a tune of course.

Speak to people over east and they are talking $3k tops... Would be cheaper for me to put the car on a truck tranporter to Sydney and back but thhe risk of damage in transit aint worth it I reckon.

At this stage I am looking at going with x-speed who are pricey but I know the job will be done right the first time. UNLESS anyone here has other ideas??

i dont think 5k is cheap to assemble and install an engine into a car

a couple of engine builders have quoted me 1k~ to assemble the engine

so thats 4k to put it in?

a normal workshop rate is $90 an hour

thats 44.4 hours

i highly doubt it would take 5 working days to fit an engine in

Just chase up a new engine then work on the price for fitting it separately, I know of a new Nur motor that just landed and it was the same price as places charge to rebuild one (freight and duty included).

The workshop fitting the engine rebuilds motors them self but even they see the viability in chasing up a new one in Japan especially on an RB26.

Just a tip mate. Most workshops get the blocks and heads sent away to engine builders. Why not go to the source and speak to them about assembling a motor if you provide the parts bought online you will save yourself some cash in the long run. In regards to getting the motor out find some friends or family to help or source someone cheap.

Also with workshops you'll find if you bring your own parts the labour might be higher in the case of you purchasing everything from them because they generally make some money on the parts around 30% ~.

Edited by monga
  • 5 years later...

,

Just a tip mate. Most workshops get the blocks and heads sent away to engine builders. Why not go to the source and speak to them about assembling a motor if you provide the parts bought online you will save yourself some cash in the long run. In regards to getting the motor out find some friends or family to help or source someone cheap.

Also with workshops you'll find if you bring your own parts the labour might be higher in the case of you purchasing everything from them because they generally make some money on the parts around 30% ~.

hey guys whos is the go to guys these days for quality rb assembly like monga said, cheaper to take it directly to a engine machine shop, the question is who knows Rb26 engines inside and out in perth or ............. where in australia for that fact

Galvsport in Osborne park seem to have taken the cake lately as the RB specialists. Josh would have around minimum 10 RB26/RB28 builds on the go at the moment and very busy leading up to racewars. good bloke, will give you the time of day to have a chat about what you want and suggest from tbere

few pics of a customers RB28

post-100996-0-14824300-1394500300_thumb.jpgpost-100996-0-27834300-1394500307_thumb.jpgpost-100996-0-92407100-1394500318_thumb.jpgpost-100996-0-35515400-1394500322_thumb.jpgpost-100996-0-81765300-1394500323_thumb.jpgpost-100996-0-20790900-1394500344_thumb.jpgpost-100996-0-43616600-1394500355_thumb.jpgpost-100996-0-93651000-1394501392_thumb.jpgpost-100996-0-38803000-1394501417_thumb.jpgpost-100996-0-39514800-1394501420_thumb.jpg

Edited by janey babey

Galvsport in Osborne park seem to have taken the cake lately as the RB specialists. Josh would have around minimum 10 RB26/RB28 builds on the go at the moment and very busy leading up to racewars. good bloke, will give you the time of day to have a chat about what you want and suggest from tbere

few pics of a customers RB28

attachicon.gif3.jpgattachicon.gif5.jpgattachicon.gif7.jpgattachicon.gif11.JPGattachicon.gif14.JPGattachicon.gif11.JPGattachicon.gif9.jpgattachicon.gifIMG_0024.JPGattachicon.gifIMG_0023.JPGattachicon.gif15.jpg

cheers mate your another person that has recomended galvsport i sent them an email allready see where it goes from there happy days

Galvsport in Osborne park seem to have taken the cake lately as the RB specialists. Josh would have around minimum 10 RB26/RB28 builds on the go at the moment and very busy leading up to racewars. good bloke, will give you the time of day to have a chat about what you want and suggest from tbere

few pics of a customers RB28

attachicon.gif3.jpgattachicon.gif5.jpgattachicon.gif7.jpgattachicon.gif11.JPGattachicon.gif14.JPGattachicon.gif11.JPGattachicon.gif9.jpgattachicon.gifIMG_0024.JPGattachicon.gifIMG_0023.JPGattachicon.gif15.jpg

Jane pls.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
×
×
  • Create New...