Jump to content
SAU Community

Recommended Posts

I think I've got it down to two places I'll be calling to get my 100,000Km service done... ...all depending on time off the road and time I can get off work because I use my car for work...

But I'd like to know who people recommend for such a big service... ...and what needs to be closely looked at...

I might still go to my regular guy... ...but they mostly do holdens and fords and there are four other cars from my family that go there as well as about 7 others from the neighbors... ...So they do have me covered or basic services... ...and I'm sure they could do it too... ...But I was just thinking that there are more Nissan orientated workshops out there that would have a better idea of what to look for on a big service...

Thanks in advanced for your suggestions...

Link to comment
https://www.sau.com.au/forums/topic/230807-100000km-service/
Share on other sites

depends on who you ask and what workshop

expect around $1100 for the whole thing

timing belt & tensioner bolts and bits

100,000 service

water pump

all fluids etc so its a big job

the timing belt supplied and fitted is approx $450 ish ballpark (lots of labour)

Here is what I can think of,

Oil

Oil filter

Air filter / Clean pods

Fuel filter

Battery (If you think is getting old)

Radiator Coolent Flush

Brake pads / Machine Disks (If worn)

Timing Belts / Fan Belts

Spark Plugs

Check all your tyres (Change if worn)

Gear Box oil (If had not been done)

Check under the car / drivetrain

And do the genaral service look over.

Its a big one for service. TGS Performance and Le Mans Automotive are to places I take my car to.

depends on who you ask and what workshop

expect around $1100 for the whole thing

timing belt & tensioner bolts and bits

100,000 service

water pump

all fluids etc so its a big job

the timing belt supplied and fitted is approx $450 ish ballpark (lots of labour)

paid around that, full timing kit, water pump, fuel filter etc.

think it was only with them overnight.

Went to Nissco in bayswater, Randy is the only man to touch my cars and my familys.

9761 4743, 2halbert rd, bayswater

www.nissco.com.au

Ryan sent ya and he'll look after you!

-Ryan

Edited by Ryan1600

yeahh i got quoted around 1k 2 do 100'000km service...

but they looked and said it had already been replaced and i just recently changed oil, fuel filter, spark plugs so i jus got them to do a minor service and change oil filter, coolent flush.

couldnt believe it when i heard $1000+ :D

i assume a 200k service is the same as 100k?

mine is due for 200k

anyone got any info on a 200k service?

std factory items (200k old): water pump, oil pump, turbo, all internals and usual junk & new coils

what really needs doing? ie: what is at risk of failure

i dont want any more power

bit of a bugger hey, water pump & oil pump in parts alone is nearly $1k all up ?

but if dont replace them and either fails then you risk the engine - bah hum bug

likewise with the turbo too i spose, if i dont replace it and the exhaust wheel dies then it can risk taking the engine and new internals with it

bugger

yeah turbo is an interesting one.

i mean any 2nd hander you get is going to have what, min 100k on it realistically. ;)

oil/water wont come to 1k, well... i suppose in total with labour and so on your over 1k :(

UAS do the cheapest pricing for that kinda stuff (pumps) so check em out

damn thats a hefty 200,000 service cost then

if i replace all the items at risk

timing belt change (as part of normal X00,000 service)

standard X00,000 service fluids, etc

oil pump

water pump

would it be needed to replace pistons here or stock ones are ok even at 200,000?

now lets say i just drive it till the timing belt snaps

its likely to mash the valves and pistons

so it would be the same as above, plus pistons and valves

  • 7 months later...

my 200,000 got done today

i did the oil and oil filter last week

new timing belt done

new water pump (current one is leaking, otherwise would have kept it)

VERY competitive pricing and fast as too (lov'in it)

thanks to EAS in airport west

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...