Jump to content
SAU Community

R33 GTST & Soarer TT

Yakuza
 Share

Recommended Posts

rs73 Grand Master

rs73

Posted
Posted

I think Soarer TT is a very fast car, even in auto form. A manual R33 turbo in stock form will have a hard time trying to beat this, unless you modify ur R33....

Stock factory spec, the Soarer TT will win over R33 by about 0.36 seconds over 400m (TT=14.02s vs R33=14.38s). But a manual R33 is lighter so it's easier to modify ur car to be in the mid 13s, while the heavier Soarer will need more power to match a modded GTS-t and the auto box has some limit... but HPI's Sin City Soarer project has made some respectable power there... with lots of mods too, but that's a manual version.

rs73 Grand Master

rs73

Posted
Posted

Even if soarers are like.... 150-200kg heavier from R33:

1. From factory, they came with +/- 20kw more power.

R33=187kw vs Soarer=206kw claimed spec

2. From factory, TT came with one extra turbo.

3. Soarer's TT (as well as Supra) are known for their excellent

twin turbo management, lots better than Liberty B4

4. Well managed TT equals more torque.... more acceleration.

These facts would make up for the added weight required for NVH reduction, plusher and more luxurious ride for Soarer's target customers....

Turbo Tits Community Regular

Turbo Tits

Posted
Posted
Originally posted by Soulja

Also they r shit off the block, i had about 1 or 2 car distance between one in astra

How do you know the Soarer was even trying? Unless of course it was a friend of yours driving the Soarer, and both of you knew it was a race. In which case i withdraw my comment.

Even if the Soarer was trying to beat you in the Astra, how do you know the Soarer wasnt the 3L atmo variety?

Not meaning to have a go at you man, its just that comparisons like that dont really mean much, if anything at all.

Contrary to you comparison, the 1JZ has always been renowned for their "glorious" (quoting HPI) low-end torque, which would account for greater accelaration than your astra.

Soulja Collaborator

Soulja

Posted
Posted

rs73, it doesn't work like that, we don't live in a perfect world many outside factors will affect the cars overall acceleration. i belive that the skyline would be faster on the take off and it would be a close finish.

(just my 2cents wit abit of phy input heheh ;))

Turbo_tits im about 80% he has going at it, as we were for along time, i think the Bov made me think it was a turbo hehe :) , might not have been thou

rs73 Grand Master

rs73

Posted
Posted

I would say a close call...

A GTS-T with minor mod would have around 150-160rwkw.

There's still long way to go to get at least 170-180rwkw to take advantage of GTS-t lighter chassis.

But i'm not sure, if you are keen, you can do a power to weight calculation and see how much rwkw is required for gts-t to equal that soarer's 200rwkw....

Turbo Tits Community Regular

Turbo Tits

Posted
Posted
Originally posted by Soulja

Turbo_tits im about 80% he has going at it, as we were for along time, i think the Bov made me think it was a turbo hehe :) , might not have been thou

I wonder if he was one of those wannbe turbo, atmo fellas, sticking his head out the window and making "pshhh" noises ;)

Your Astra isnt the new turbo model is it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...