Jump to content
SAU Community

Recommended Posts

I own a skyline gtst and people are always trying to drag race me with 4wd cars. Gtrs, Pulsar gtir ,evo's ,ecpilse etc.

First of all i do know that Gtrs are the top dogs. and I'm planning on buying one in the coming future.

If it wasn't for this unit i would stand a chance.

check the link out and please give use you thoughts on the unit.

http://www.world-motorsports.com/products.php

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

I own a skyline gtst and people are always trying to drag race me with 4wd cars. Gtrs, Pulsar gtir ,evo's ,ecpilse etc.

First of all i do know that Gtrs are the top dogs. and I'm planning on buying one in the coming future.

If it wasn't for this unit i would stand a chance.

check the link out and please give use you thoughts on the unit.

http://www.world-motorsports.com/products.php

Its not clear to me how exactly this thing works. I like the operating method of the Jaycar boost controller which is triggered by the duty cycle of the injectors and can absolutely eliminate any boost going to the wastegate actuator until you want it to. I am about to install my Jaycar EBC (at about half the price of the above - although that is for the build it yourself kit) - people who have used them say they work as described so sounds ideal to me.

This is not to say that the new device mentioned above is no good - it is just not clear to me that it would be better.

I own a skyline gtst and people are always trying to drag race me with 4wd cars. Gtrs, Pulsar gtir ,evo's ,ecpilse etc.

First of all i do know that Gtrs are the top dogs. and I'm planning on buying one in the coming future.

If it wasn't for this unit i would stand a chance.

check the link out and please give use you thoughts on the unit.

http://www.world-motorsports.com/products.php

Its a boost controller

Its the same as any other boost controller - it controls boost.

So whats your point?

Its no better than anything else save for the expensive price tag

I own a skyline gtst and people are always trying to drag race me with 4wd cars. Gtrs, Pulsar gtir ,evo's ,ecpilse etc.

Yep they will do that.

So let them race themselves on the street and save your fun for the race track where it belongs.

That boost controller has nothing special about it at all.

Eclipse? As in the Mitsi? I thought they were FWD?

Read before you talk the same advice that you gave me then you'll see the benefits

lol so what everyone at performance mag. don't know what there talking about.

(ignorant as i thought.)

see if any GTRs can hit these times

This is a 4WD eclipse and this is one of his bad times

keep on dreaming GTR fans show me something better. (thats real)

I'll give you the world wide web to find a GTR as fast as this, don't even think hks skyline. when you all find one, I'll show you the last video thats not on the net.

so step up

I own a skyline gtst and people are always trying to drag race me with 4wd cars. Gtrs, Pulsar gtir ,evo's ,ecpilse etc.

First of all i do know that Gtrs are the top dogs. and I'm planning on buying one in the coming future.

If it wasn't for this unit i would stand a chance.

check the link out and please give use you thoughts on the unit.

http://www.world-motorsports.com/products.php

Dude why are you showing clips of 7 second prepped drag cars as an argument why a boost controller (which is the same as any other) gives them an "edge"?

For the record, the fastest GTR @ present i believe is the 7.57 @ 191mph by the Heat Treatments GTR.

Is that not faster than the vids you posted?

Or am i again, missing something magical and elusive?

I honestly think you have NFI what your talking about

let me guess was it build in australia.? lol

the car has ran a 7 sec flat and keep in mind that everything about the car is quarter the size and price.? i guess you can't beat that.

i guess that is why the australian dollar lost its value.lol in the last 10 years keep up the good work guy's thats why the japs rule there more open minded. selfdevlopment, most of you should work on that.

let me guess was it build in australia.? lol

the car has ran a 7 sec flat and keep in mind that everything about the car is quarter the size and price.? i guess you can't beat that.

i guess that is why the australian dollar lost its value.lol in the last 10 years keep up the good work guy's thats why the japs rule there more open minded. selfdevlopment, most of you should work on that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...