Jump to content
SAU Community

Recommended Posts

So!

Went down to Autotech on Wednesday to get a Power FC + Boost Controller installed, and get it run on the dyno.

Due to certain family situations, Ed was unable to get it done by 5:30 that night, but said he would get it done. So I got a lift down to Hume after work, and waited around till about 6pm.

I'm not going to go into details about his situation, but basically he sacrificed family time to help me out, so I could get home that night. (I live in Hall, and the 6 hour walk home wasn't a nice prospect)

So we're sitting in the car, doing the dyno tune... Notice that the clutch is acting odd. Slipping a little then regripping... After a bit of tuning, we up the boost to 12psi, and the engine starts detonating.

Turns out the spark plugs installed by Fast and Furious were gapped at 1.1.... fail.

So we re-gap to 0.8, and give it another try.

Engine ramps up, then *sniff sniff* clutch melts.

By this time, its 8pm.

Long story short. Ed drives me to his house, gives me the keys to his car, and I'm now driving around a tiny red Alpha Romeo until Friday/Monday when the new clutch gets put in.

I have nothing but good things to say about what happened that night. I semi expected the clutch to give, and well, Ed is a bloody champ.

Extreamly, uh, comforted that my car is in good hands.

If you ever get the chance to meet ed at Autotune, you'll know what I'm talking about. A really nice guy. Very knowledgeable about everything he does.

Looking forward to getting my GTS-T back!

-Alistair

Edited by Sonuku
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/
Share on other sites

I followed Ed from Integra across to Autotech and I would never trust anyone else anywhere near as much with my baby.

I'm familiar with his current situation and experienced some delays with my turbos getting fitted for similar reasons. Ed then organised for us to borrow Peter's Hilux for a few days to help us out as it was killing us being reduced to one car.

I have absolutely nothing but good words and praise for Ed the man is f*cking awesome! As mentioned very knowledgeable and always makes time to answer my questons and go through everything with me thoroughly no matter how blonde I am being! :P

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4084253
Share on other sites

I'd like to start by saying is that I've always got very friendly helpful service at ACT garages. I'm not going to talk specifics or name businesses but friendliness is good, but it would be nice if these businesses were a bit more professional or organised.

1.I travel to get to Canberra, so when I book my car in for 0830, I expect 0830. I hate having to get up at 0500, travel to the garage, then they all shuffle cars around and organise morning tea then do rego checks etc before your car is touched at 1000, this means I could have left at 0800 and still made it, so why [when I've booked in weeks in advance] ask me to come early then stall me. I also pay cash for every job ever done, so I am a good customer.

2. The garage guys get in and out of your car with dirty boots and overalls [i now use seat covers and rubber mats to stop the oil etc].

3. When I book in for a tune, I don't expect the datalogit cable to have been leant to a mate and can't get hold of him excuse, so they use the hand controller [they did a good job, just not an excellent job]. This may be OK for a local, but I can't just pop back in any old time and get my tune checked.

Having said that, they know what they are doing, and are good tuners etc. I'm just trying to supply constructive feedback.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4084677
Share on other sites

I'd like to start by saying is that I've always got very friendly helpful service at ACT garages. I'm not going to talk specifics or name businesses but friendliness is good, but it would be nice if these businesses were a bit more professional or organised.

Well since this is a thread about Autotech one can only assume....

1.I travel to get to Canberra, so when I book my car in for 0830, I expect 0830. I hate having to get up at 0500, travel to the garage, then they all shuffle cars around and organise morning tea then do rego checks etc before your car is touched at 1000, this means I could have left at 0800 and still made it, so why [when I've booked in weeks in advance] ask me to come early then stall me. I also pay cash for every job ever done, so I am a good customer.

I don't like getting up at 5 to drop my car off either (I start work early) so just drop it off the day before. What else would one be expected to pay with??

2. The garage guys get in and out of your car with dirty boots and overalls [i now use seat covers and rubber mats to stop the oil etc].

Do you expect them to get changed or something?? I use seat covers for this exact reason.

3. When I book in for a tune, I don't expect the datalogit cable to have been leant to a mate and can't get hold of him excuse, so they use the hand controller [they did a good job, just not an excellent job]. This may be OK for a local, but I can't just pop back in any old time and get my tune checked.

Having said that, they know what they are doing, and are good tuners etc. I'm just trying to supply constructive feedback.

Admittedly that would piss me off but lets face it we've all been booked into places and sometimes stuff that doesn't go right, that kind of thing happens everywhere. Fact is though we live in Canberra and we don't have a whole lot of choice or variety when it comes to people that know what they are doing. Sometimes even wth the cable a tune is not 100% and you have to go back, it's not their fault you don't live locally.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4085513
Share on other sites

Looks like I'll be getting my car back Monday.

None too worried tho.

Prettysure I put a spanner in the works, and threw their workload off balance for the week.

--

Re: Mechanics being dirty etc... Um, thats kind of a given. Don't expect everywhere to be a Mercedes dealer I guess :blink: Kat makes good points too.

Constructive critisism is always good tho, I tend to just bag on shit I don't like. Most of the time, if you go to a tuner with good staff, who are good people, there is a relative amount of respect for you and your belongings (with practicality put in place, people make mistakes)

Edited by Sonuku
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4085634
Share on other sites

I expect them to put the el cheapo plastic covers over the seats before they sit on them and a paper mat on the floor. Me providing something to stop them from putting grease on my seats would be like taking my own sheets to the doctors. Common courtesy and a professional service... not too much to expect for the hourly rate that is being charged.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4086013
Share on other sites

  • 2 weeks later...

I've taken my car to Ed for a few years now, couldn't recommend him highly enough. Worked back on a saturday once when he was at Integra to replace my clutch even after i'd said it wasn't that urgent. Also offered me his car for the day when he needed to change the date i had my car booked in for a service so i could still get to work and back.

Bloody good customer service!

Edited by r33skylinegtst
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4116148
Share on other sites

  • 2 weeks later...

ahh the little alfa spent the last few nights at my house. it really is the local call girl, isnt it. i think the 80's styling looks ridiculous, but i can see what the italian charm is :happy:

i recommend autotech too. you do need some patience with them though, they often have many jobs to work on so yours wont be done quickly, but i would rather it done properly, especially when dealing with a market of cars like the skyline. when it comes to working on things like the ATTESSA system you want people who have heard of it before working on it. most ordinary workshops arent suited for that. every other automotive place ive been to takes one look at my car and says "what, the volvo?".....not a good start

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4137748
Share on other sites

Yer I like Ed.

I'm a little miffed about the work I just had done with them though.

I spent a lot of money over the last two weeks on a bunch of small shit and almost came out with a cooked motor, due to a couple silly mistakes which I didn't notice straight away.

I'm a pretty easy going guy and as I said I like Ed, so I mentioned it but didn't drill him about it.

Although I am going to get him to check a couple things for me because of it.

Edited by Data-Cain
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4138789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...