Jump to content
SAU Community

Recommended Posts

So!

Went down to Autotech on Wednesday to get a Power FC + Boost Controller installed, and get it run on the dyno.

Due to certain family situations, Ed was unable to get it done by 5:30 that night, but said he would get it done. So I got a lift down to Hume after work, and waited around till about 6pm.

I'm not going to go into details about his situation, but basically he sacrificed family time to help me out, so I could get home that night. (I live in Hall, and the 6 hour walk home wasn't a nice prospect)

So we're sitting in the car, doing the dyno tune... Notice that the clutch is acting odd. Slipping a little then regripping... After a bit of tuning, we up the boost to 12psi, and the engine starts detonating.

Turns out the spark plugs installed by Fast and Furious were gapped at 1.1.... fail.

So we re-gap to 0.8, and give it another try.

Engine ramps up, then *sniff sniff* clutch melts.

By this time, its 8pm.

Long story short. Ed drives me to his house, gives me the keys to his car, and I'm now driving around a tiny red Alpha Romeo until Friday/Monday when the new clutch gets put in.

I have nothing but good things to say about what happened that night. I semi expected the clutch to give, and well, Ed is a bloody champ.

Extreamly, uh, comforted that my car is in good hands.

If you ever get the chance to meet ed at Autotune, you'll know what I'm talking about. A really nice guy. Very knowledgeable about everything he does.

Looking forward to getting my GTS-T back!

-Alistair

Edited by Sonuku
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/
Share on other sites

I followed Ed from Integra across to Autotech and I would never trust anyone else anywhere near as much with my baby.

I'm familiar with his current situation and experienced some delays with my turbos getting fitted for similar reasons. Ed then organised for us to borrow Peter's Hilux for a few days to help us out as it was killing us being reduced to one car.

I have absolutely nothing but good words and praise for Ed the man is f*cking awesome! As mentioned very knowledgeable and always makes time to answer my questons and go through everything with me thoroughly no matter how blonde I am being! :P

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4084253
Share on other sites

I'd like to start by saying is that I've always got very friendly helpful service at ACT garages. I'm not going to talk specifics or name businesses but friendliness is good, but it would be nice if these businesses were a bit more professional or organised.

1.I travel to get to Canberra, so when I book my car in for 0830, I expect 0830. I hate having to get up at 0500, travel to the garage, then they all shuffle cars around and organise morning tea then do rego checks etc before your car is touched at 1000, this means I could have left at 0800 and still made it, so why [when I've booked in weeks in advance] ask me to come early then stall me. I also pay cash for every job ever done, so I am a good customer.

2. The garage guys get in and out of your car with dirty boots and overalls [i now use seat covers and rubber mats to stop the oil etc].

3. When I book in for a tune, I don't expect the datalogit cable to have been leant to a mate and can't get hold of him excuse, so they use the hand controller [they did a good job, just not an excellent job]. This may be OK for a local, but I can't just pop back in any old time and get my tune checked.

Having said that, they know what they are doing, and are good tuners etc. I'm just trying to supply constructive feedback.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4084677
Share on other sites

I'd like to start by saying is that I've always got very friendly helpful service at ACT garages. I'm not going to talk specifics or name businesses but friendliness is good, but it would be nice if these businesses were a bit more professional or organised.

Well since this is a thread about Autotech one can only assume....

1.I travel to get to Canberra, so when I book my car in for 0830, I expect 0830. I hate having to get up at 0500, travel to the garage, then they all shuffle cars around and organise morning tea then do rego checks etc before your car is touched at 1000, this means I could have left at 0800 and still made it, so why [when I've booked in weeks in advance] ask me to come early then stall me. I also pay cash for every job ever done, so I am a good customer.

I don't like getting up at 5 to drop my car off either (I start work early) so just drop it off the day before. What else would one be expected to pay with??

2. The garage guys get in and out of your car with dirty boots and overalls [i now use seat covers and rubber mats to stop the oil etc].

Do you expect them to get changed or something?? I use seat covers for this exact reason.

3. When I book in for a tune, I don't expect the datalogit cable to have been leant to a mate and can't get hold of him excuse, so they use the hand controller [they did a good job, just not an excellent job]. This may be OK for a local, but I can't just pop back in any old time and get my tune checked.

Having said that, they know what they are doing, and are good tuners etc. I'm just trying to supply constructive feedback.

Admittedly that would piss me off but lets face it we've all been booked into places and sometimes stuff that doesn't go right, that kind of thing happens everywhere. Fact is though we live in Canberra and we don't have a whole lot of choice or variety when it comes to people that know what they are doing. Sometimes even wth the cable a tune is not 100% and you have to go back, it's not their fault you don't live locally.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4085513
Share on other sites

Looks like I'll be getting my car back Monday.

None too worried tho.

Prettysure I put a spanner in the works, and threw their workload off balance for the week.

--

Re: Mechanics being dirty etc... Um, thats kind of a given. Don't expect everywhere to be a Mercedes dealer I guess :blink: Kat makes good points too.

Constructive critisism is always good tho, I tend to just bag on shit I don't like. Most of the time, if you go to a tuner with good staff, who are good people, there is a relative amount of respect for you and your belongings (with practicality put in place, people make mistakes)

Edited by Sonuku
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4085634
Share on other sites

I expect them to put the el cheapo plastic covers over the seats before they sit on them and a paper mat on the floor. Me providing something to stop them from putting grease on my seats would be like taking my own sheets to the doctors. Common courtesy and a professional service... not too much to expect for the hourly rate that is being charged.

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4086013
Share on other sites

  • 2 weeks later...

I've taken my car to Ed for a few years now, couldn't recommend him highly enough. Worked back on a saturday once when he was at Integra to replace my clutch even after i'd said it wasn't that urgent. Also offered me his car for the day when he needed to change the date i had my car booked in for a service so i could still get to work and back.

Bloody good customer service!

Edited by r33skylinegtst
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4116148
Share on other sites

  • 2 weeks later...

ahh the little alfa spent the last few nights at my house. it really is the local call girl, isnt it. i think the 80's styling looks ridiculous, but i can see what the italian charm is :happy:

i recommend autotech too. you do need some patience with them though, they often have many jobs to work on so yours wont be done quickly, but i would rather it done properly, especially when dealing with a market of cars like the skyline. when it comes to working on things like the ATTESSA system you want people who have heard of it before working on it. most ordinary workshops arent suited for that. every other automotive place ive been to takes one look at my car and says "what, the volvo?".....not a good start

Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4137748
Share on other sites

Yer I like Ed.

I'm a little miffed about the work I just had done with them though.

I spent a lot of money over the last two weeks on a bunch of small shit and almost came out with a cooked motor, due to a couple silly mistakes which I didn't notice straight away.

I'm a pretty easy going guy and as I said I like Ed, so I mentioned it but didn't drill him about it.

Although I am going to get him to check a couple things for me because of it.

Edited by Data-Cain
Link to comment
https://www.sau.com.au/forums/topic/232813-autotech-hume/#findComment-4138789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...