Jump to content
SAU Community

Recommended Posts

I don't if it's just me being a bit naive about the cost of things these days but I feel like I got well and truly ripped for my 100,00km service, i.e timing belt etc, on my S2 RS4.

So how much would you expect to pay for a major service?

In the first instance I will keep the cost and name of mechanic close to my chest but if he has done me over the sh*t will fly.

Link to comment
https://www.sau.com.au/forums/topic/233227-100000-km-service/
Share on other sites

Well dont forget that the timing belt should be done around that time too- so that

can add greatly to the over all cost- perhaps you should list what WAS done then we can all

have a look then pass judgement-

I don't if it's just me being a bit naive about the cost of things these days but I feel like I got well and truly ripped for my 100,00km service, i.e timing belt etc, on my S2 RS4.

So how much would you expect to pay for a major service?

In the first instance I will keep the cost and name of mechanic close to my chest but if he has done me over the sh*t will fly.

timing belt would be about $150 for aftermarket, if OEM almost double. - labour would be 2.0 hours at say $180

Lube service would be approx $250 depending on oils used (assuming engine and transfer and diffs)

At 100k should be coolant and waterpump. If waterpump OEM is $155, coolant is $65, labour on top of timing belt would be another hour so $90.

tune, assuming just a check tune not a dyno, should not be anymore than $100.

so total would be around $1,000.

depends what sparkies he put in? if he put iridium plugs in they are like $30 each so there is a $180 plus half hour to fit.

Air filter - assuming standard panel is (last time I checked) $79 and say 15 minutes to fit.

Fuel filter was $34 and say half hour to fit.

Yeah dood, that seems abit excessive by about $500 odd, did you get an itemised account?

you wont be able to sit down for a month mate, you have been well and truly ass raped if you paid anywhere next to 2k, my bill came to $600ish all oils timing belt water pump labour etc that was about a year ago.

when i got my cooler put on we both came to an idea do half the 100k service now and half later save on cost's ...oil - front diff, rear diff, auto trans oil , engine oil, oil filter, basicall all the fluids that looked old and coulnt wait .. but for that labour was only $240 parts was $148 .. in 6km more im getting timing belt and sparks done and change air filter and maybe fuel filter .. this is at a well reconized workshop also

umm .. I wouldnt agree with 1/2 hr to fit - they can be a b1tch to do as you gotta get SO much stuff out of the way before you do it. And if they were not familiar with an RB25DET it might take em twice that long .

HALF AN HOUR to fit a fuel filter! WTF!! thats a massive ripoff

Did they itemise the bill? if so maybe you could scan in and just blur out the workshop name.

2k - whoa baby! thats good motivation to learn to do it yourlself hey?

depends what sparkies he put in? if he put iridium plugs in they are like $30 each so there is a $180 plus half hour to fit.

Air filter - assuming standard panel is (last time I checked) $79 and say 15 minutes to fit.

Fuel filter was $34 and say half hour to fit.

Yeah dood, that seems abit excessive by about $500 odd, did you get an itemised account?

timing belts terrify me too - but apparently if you get the thing set up ok and obey the rules - ie keep an eye on where the pulleys are pointing etc- then your ok

oh well - after the 100thou service you should be able to DIY it and reclaim the 2k

Hell yeah, as of yesterday I have got myself a weekender in my mates workshop... I usually do my own services but when it came to timing belt etc I just cbf. Looks like I learnt a lesson the hard way.

Just thought I'd say that I got a quote from a reputable workshop in Adelaide who do a lot of work on imports and they said ~$1,250 (I can't remember the exact price, but it was around there).

This for a series 2 RS-Four V (auto), and they said everything got changed - plugs, fluids (diffs, auto, brake fluid) air cleaner, fuel filter, spark plugs, timing belt, idler & tensioner pulleys & water pump... I must say, considering the cost of components to do it yourself anyway, I'm still thinking about it... I know I can do it 'cause I've had it far enough apart before, but I just don't know if I can justify the time. Plus I could get them to do a couple of extra things like replace the exhaust manifold gasket and studs, checkout the manifold for cracks for hopefully not too much extra while they're there...

timing belts terrify me too - but apparently if you get the thing set up ok and obey the rules - ie keep an eye on where the pulleys are pointing etc- then your ok

oh well - after the 100thou service you should be able to DIY it and reclaim the 2k

I dont get this myself, I mean, if you are confident enough to remove the spark plugs you have all the skills required to change a timing belt, and it doesn't take that long really.

The ONLY golden rule to stress about is making sure the crank/cams aren't rotated if the timing belt is off, other than that, it is really simple to do.

Best way to learn is by doing.

Mine was almost $2500... :P but I had a cracked exhaust manifold (with 4 broken studs) and leaking main seal etc.. <sigh> But it was a new car afterwards. Had the usual work done with water pump, thermostat, plugs, timing belt (racing one) plus had engine mounts done, all acc. belts, vacuum hoses etc etc etc..

Just thought I'd say that I got a quote from a reputable workshop in Adelaide who do a lot of work on imports and they said ~$1,250 (I can't remember the exact price, but it was around there).

This for a series 2 RS-Four V (auto), and they said everything got changed - plugs, fluids (diffs, auto, brake fluid) air cleaner, fuel filter, spark plugs, timing belt, idler & tensioner pulleys & water pump... I must say, considering the cost of components to do it yourself anyway, I'm still thinking about it... I know I can do it 'cause I've had it far enough apart before, but I just don't know if I can justify the time. Plus I could get them to do a couple of extra things like replace the exhaust manifold gasket and studs, checkout the manifold for cracks for hopefully not too much extra while they're there...

I have to get mine done soon too, is this Boostworx?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...