Jump to content
SAU Community

Recommended Posts

nice mate can i ask where you got your front lip from and how much it cost

Thanks, mate. 

I got my Veilside front lip, bought as a whole kit, from a shop called Styled2Race (www.styled2race.com) in Perth. It costed me $1000 for this full fiberglass kit.

Nice skirts.. makes it look much lower. Does it touch when you drive over bumps?

Thanks, mate.

It is lower by about 15mm to 20mm now. I am thinking of making a custom front under splitter in the future to match that differences in heights.

So far, I haven't touch any bumps after new side skirts on. Plus, I have pretty high drive way but the new sides skirts

clear them. Lucky .

Edited by VNS 24

Thanks, mate.

It is lower by about 15mm to 20mm now. I am thinking of making a custom front under splitter in the future to match that differences in heights.

So far, I haven't touch any bumps after new side skirts on. Plus, I have pretty high drive way but the new sides skirts

clear them. Lucky .

I'd say you cannot tell the difference in hight between the front and side skirts unless your really looking out for it..

  • 2 weeks later...

Hey guys, this is my new 35, pick it up in a couple of weeks when i fly back to perth :) Few things done to it in jland before i purchased it. set of weds kranze rims, 20's on the rear n 19's on the front, orc clutch, short shift. factory brembos, black roof, aftermarket sunroof, rsr adjustable suspension, exhaust and pod. nothing too crazy but quite happy with it. once it gets here i'll be throwing the racing hart 19's off my lil brothers 34 on for a while n see how they look so the kranze may be up for sale.

anyways cheers :)

kohbz

post-19690-0-54854600-1307326732_thumb.jpg

post-19690-0-85647200-1307326741_thumb.jpg

post-19690-0-72327700-1307326761_thumb.jpg

post-19690-0-15294500-1307326775_thumb.jpg

post-19690-0-17183400-1307327030_thumb.jpg

Here is mine :D

Importing it through J-spec, it is still in Japan at the moment. White 2003 350GT Premium, 6spd :D

247195_10150188525433543_585278542_6915934_4478069_n.jpg

250635_10150188525508543_585278542_6915935_728350_n.jpg

246665_10150188525748543_585278542_6915940_587642_n.jpg

247965_10150188525858543_585278542_6915942_43956_n.jpg

249610_10150188525998543_585278542_6915945_4357631_n.jpg

No Crazy plans for it, but the plan is for exhaust/intake, reasonable coilovers, and enjoying the awesomeness that is a VQ35DE :D

hey adz, cheers i liked the look of the black roof eh makes a fair difference n same with the headlight eyelines.vyeah f**k knows why they changed the badge of to infinity, hate the infinity badge but myeh. that'll be going soon anyway.

@180j

Like the black roof mate looks good. Headlight blinkers make it a little different too. Interesting that i has infinity badging from japan.

Hey guys, this is my new 35, pick it up in a couple of weeks when i fly back to perth :) Few things done to it in jland before i purchased it. set of weds kranze rims, 20's on the rear n 19's on the front, orc clutch, short shift. factory brembos, black roof, aftermarket sunroof, rsr adjustable suspension, exhaust and pod. nothing too crazy but quite happy with it. once it gets here i'll be throwing the racing hart 19's off my lil brothers 34 on for a while n see how they look so the kranze may be up for sale.

anyways cheers :)

kohbz

Good pick already moded.. stage 1 complete :action-smiley-069:

Here is mine :D

Importing it through J-spec, it is still in Japan at the moment. White 2003 350GT Premium, 6spd :D

No Crazy plans for it, but the plan is for exhaust/intake, reasonable coilovers, and enjoying the awesomeness that is a VQ35DE :D

Good stuff. How long does it take to arrive? and how much is the shipping cost?

Edited by str8g

Depends on when you buy it relative to when the next boat is,

Mine arrives in Australia on 19th of July.

Shipping itself is not that expensive (considering you are moving a whole car from one country to another!), but you also have all of the import duties, customs etc to pay,

and not to mention all of the other importing costs.

Oh and it turns out mine isn't a premium, as it doesn't have dual zone climate control or the Bose system. but it has the leather/suede seats and pearl white paint :D so I am happy!

Good stuff. How long does it take to arrive? and how much is the shipping cost?

Good pick already moded.. stage 1 complete :action-smiley-069:

Yep :) in the middle of purchasing 5zigen headers, hfcs, megan racing y pipe n cat back exhaust. pricing up greddy tt kit too :) mind u its hard hearing back from people bout that last one lol.

thought i might contribute something to this thread.. On a recent trip to the hunter valley, i managed to get some shot in..

LO8Z3095a.jpg

LO8Z3104a.jpg

LO8Z3109a.jpg

LO8Z3130a.jpg

LO8Z3171a.jpg

LO8Z3178a.jpg

LO8Z3182a.jpg

LO8Z3189a.jpg

FARRRRR!!! So that's what our stock rims look like in black! I was so close to powder coating them but never ended up doing it!

Looks awesome mate!

Should be getting my new rims soon! Will post pics up when they arrive. Anyone know a good tire size (not too stretched) for a set of 20 x 11 +24 ?

Cheers

Yea mate it looks nice don't know if you can see it in those photo's to well but it has a big exhaust on it haha has quite a wonderful note to it, sorry the pics aren't that great was kind of just a rush job for now so i could put them on the net for my mates and family elsewhere so they get a general idea should be doing some better ones at some point.

FARRRRR!!! So that's what our stock rims look like in black! I was so close to powder coating them but never ended up doing it!

Looks awesome mate!

Should be getting my new rims soon! Will post pics up when they arrive. Anyone know a good tire size (not too stretched) for a set of 20 x 11 +24 ?

Cheers

285x30x20 is a good tyre size for 11inch here's a pic of 275x30x20 +25:

http://www.rimtuck.com/photos.php?photo=1235703088.jpg&id=551&h=3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...