Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

if the skid pan was not so small then i would make more effort to go... i think the piss up the night before hand would be more fun then the driving excersizes.. hope no one takes this the wrong way. If i can sell this rb25det for $1700 i will go for sure.

Anthony, seeing as we'll be using the skidpan with a wet surface, it doesn't need to be as big because you don't need as much speed to have fun while sliding! I think at our first event we had maybe 4-5 cars out of the 40 attending go off the pan at any stage in the day.

C'mon, you'll have a blast!

No more texis makes chris sad, but I can understand :D will see if anymore local people are interested.

Thats just scary.. we bother drive the exact same car with the same first name.. are you stalking me? :D

Well.. I have nothing to say besides.. I payed.. Im in.

Ill chuck it on Pulsar Group of Australia soon enough..

anyone driving up on the morning?

i know its rather unlikely, but it's my only avenue.

let me know if anyones driving up.

cheers

just come, from the hume highway its only 2 roads, hume highway, leftonto federal highway, left onto sutton road and then your there....., its very easy..... you wont get lost and its not a huge drive...... its shorter in time and allot simpler and safer than the last hills cruise we went on...... COME SHANE!!!!!!!!!!

Everyone should sign up because it's Pauls (**RB2530**) Birthday today!!!!!!

happy birthday Paul!

Yes thank you!!!.. Its my birthday...I am 26 again!!! I dont want presents!! Instead I want you all to go to Texi!!! Make my birthday a special day....Sign up for TEXI!!

So now that it's on every single car forum in the state except for MX5 Car Talk (I'll get a mate to do that one), I'm expecting a mad rush of entrants...

Happy bday Paul... I'll help you out with your bday wishes tomorrow :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...