Jump to content
SAU Community

Isc N1, D2, G4 Coilovers

Mickya

By Mickya,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Mickya Enthusiast

Mickya

Posted
Posted (edited)

at first i was looking into the n1's but i have been told from a mate to go for either the d2 or g4, so is anyone running any of these or could tell me anyhting to help me choose easier. i basically want them for lowering but a nice daily driver thats going to give me great handling,cornering etc.

i have a 97rs4

Edited by Mickya
Link to comment
https://www.sau.com.au/forums/topic/234856-isc-n1-d2-g4-coilovers/
Share on other sites
sturb25 Proficient

sturb25

Posted
Posted
at first i was looking into the n1's but i have been told from a mate to go for either the d2 or g4, so is anyone running any of these or could tell me anyhting to help me choose easier. i basically want them for lowering but a nice daily driver thats going to give me great handling,cornering etc.

i have a 97rs4

If you want a good set of coil overs go with tein, ive got them in my stagea. Awsome handling and fully ajdustable to suit anybodys needs got mine from nengun.com for 1650 deliverd

stasis Mentor

stasis

Posted
Posted

Frankly speaking i got Tein HAs on my rig and they are all right compared to blisteins. Those shocks that you mentioned they at the bottom range. Doesnt matter if they are coilovers.

How much you are looking to spend? If its about 1.5k to 2k just go for Blistein. Ypu will never regret it. They are one of the best shocks around firm but not hard. Just gor for blisteins with Eibach springs the best money can buy. Hope this helps.

Mickya Enthusiast

Mickya

Posted
  • Author
Posted
If you want a good set of coil overs go with tein, ive got them in my stagea. Awsome handling and fully ajdustable to suit anybodys needs got mine from nengun.com for 1650 deliverd

which set of TEINs are you using? i looked and there's like 4 or 5 wagon suited sets?

Mickya Enthusiast

Mickya

Posted
  • Author
Posted
Frankly speaking i got Tein HAs on my rig and they are all right compared to blisteins. Those shocks that you mentioned they at the bottom range. Doesnt matter if they are coilovers.

How much you are looking to spend? If its about 1.5k to 2k just go for Blistein. Ypu will never regret it. They are one of the best shocks around firm but not hard. Just gor for blisteins with Eibach springs the best money can buy. Hope this helps.

yeh i'm looking at spending 1500 to 1700 maybe abit more on them, i just want to get best value for money really without out spending a sht load.

stasis Mentor

stasis

Posted
Posted

blistein with eibach springs will do it and its value too. Get it from Sk although it might take a while to get it but it worth the wait. I will be thinking of changing to Sk' blistein once i get back to oz. So by then by Tein Ha will be up for sale and its barely done 5k. Dont get me wrong about Tein, it is a good shocks but i prefer blistein. I have used blistein in my lancruiser 100 series and i loved it.

carter Enthusiast

carter

Posted
Posted
SK said to me when i asked him about the ISC range was that they are poo and have nothing but troubles and that alot of people on this forum tried them and hated them.

is that so????, ive bn running isc coilovers in my cefiro 4 18months now n ive had no dramas wat so ever, n i know a few ppl running them n hav had no dramas either, im sure ryan will have sumthing 2 say bout that lol

stasis Mentor

stasis

Posted
Posted
is that so????, ive bn running isc coilovers in my cefiro 4 18months now n ive had no dramas wat so ever, n i know a few ppl running them n hav had no dramas either, im sure ryan will have sumthing 2 say bout that lol

I agree on the no drama issue. but probably SK is refering to the performance issues. And comparing to blistein? [rpbably is "poo".

Silhouette31 Rising Star

Silhouette31

Posted
Posted

You get what you pay for...

I have a full set of ISC coilovers in my R31 Skyline and haven't had any issues other than one of the locking collars constantly coming loose.

Of course Jap brands are far superiour in quality but I wouldn't really want to buy non tested 2nd hand stuff.

So if you can afford it, definatly go Tein, Bilstein, etc.

BigDirtyJase Experienced

BigDirtyJase

Posted
Posted

I had a look at the ISC Coilovers - 12kg on the front and 10kg on the rears - that's sounds very heavy and stiff (IMO). The Tien superwagons are 4kg and 4kg. I'm no suspension expert. does it mean that the ISC will create a very stiff ride or is it the Tiens that will??

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

this is very interesting topic ... i want a new setup to maybe drop my car a inch all round but dont want to be bouncing violently at any kinda of bump like alot of these honda kids do ... if it wasnt for seat belts they would land in the center console

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
this is very interesting topic ... i want a new setup to maybe drop my car a inch all round but dont want to be bouncing violently at any kinda of bump like alot of these honda kids do ... if it wasnt for seat belts they would land in the center console
Just get the Bilstein shocks and tell the guy you still want a decent ride and they should be able to valve them accordingly and still drop it 30mm or so. If not you can look for some springs later (not Teins - I reckon mine are too hard).
carter Enthusiast

carter

Posted
Posted

na my cefiros rwd hehe

I had a look at the ISC Coilovers - 12kg on the front and 10kg on the rears - that's sounds very heavy and stiff (IMO). The Tien superwagons are 4kg and 4kg. I'm no suspension expert. does it mean that the ISC will create a very stiff ride or is it the Tiens that will??

ok the higher the spring rate the stiffer it is, but the stagea is a pretty heavy car so they shouldnt b 2 bad in it, i run 10k n 8k in my car. its stiff but not crazy stiff. the teins will b a very soft spring rate,

ISC-Performance Veteran

ISC-Performance

Posted
Posted
SK said to me when i asked him about the ISC range was that they are poo and have nothing but troubles and that alot of people on this forum tried them and hated them.

Would definetly like some more information on why this person is bagging ISC considering I barely recieve any complaints in regards to ISC coilovers and our fault rate is extremely low. And to my knowledge most people on this forum are happy with how they perform...

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...