Jump to content
SAU Community

Recommended Posts

  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

R32s (both GTR, GTS-T and GTS4), 300zx, more S13 silvias, 180sx first came out with the CA18DET... few popular cars actually appeared that year.

Come 2005, if the rule remains the same that is, 1990 models will be even more popular. While a lot of the cars above came out in 89, they didn't really hit full production en'mass until about 1990.

Much larger range of 1990 vehicles to choose from (of all types) it seems from the various auction lists I have looked at.

Hey Guys.

Ok i know first hand whats happening with the 15yr rules. I have been on the phone for almost an hour, trying to work out how they intend on implementing this rule.

Now it is NOT a change in the rule just a change in the way its interpreted. It has always been a 15yr rule, not a 14yr and 11 months rule.

Now basically they want the importer to prove what year(easy) and now the month also(hard)

Now they have said either dereg papers from japan, Proof from the manufacturer or a date and corresponding VIN list.

Now i don't know anyone who can supply me with the list of numbers i need.

But basically its to stop the potential flood of 89 models in jan 2004.

Being an importer sure is fun atm, with raws now this what mroe can they throw at us????

Glenn

somertoncarimporters.com

Finding the VIN numbers will be the key to 15 year imports a friend who is a buyier in Japan for some of the big players has nearly finished his collection of VIN numbers on all cars upto 20 years old that come into this country.

I have been sent a link to a car in free storage over in Japan and the only thing in short supply is bricks.

I would ask for info on my car if I had one sitting in Japan.

http://www.adultmovies.bz/~mandy/Celsior/C...Celsior%202.jpg

Celsior.jpg

I just cant believe that people are whinging about this. If you had've asked any importer - and I'm not talking about someone who is only interested in extracting a service fee from you - about whether the 1989 stuff would be allowed in and you would have been told that there was no way in hell the government would let them come in. I havent bought a single '89 car to store because I knew it would happen.

Its the old adage - if something appears too good to be true then it is - 16k GT-Rs fall into that bracket...

Jash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...