Jump to content
SAU Community

Recommended Posts

The cup cars use centre lock wheels, so they're a no go for your car.

According to their site, they use 24/64 - 18 size slicks in Carrera Cup, not sure about Porsche cup.

Carerra's also run different PCD's to Nissan's: http://www.carlsalter.com/old_wheel_fitments.html

Porsche = 5x130

Skyline = 5x114.3

You can get ghetto hub spacers that convert the Porsche lugs into 5x114.3 for easier wheel choice and the opposite if you wanted to run a Porsche wheel or <insert possible other Euro wheel> on your 5x114.3 hub.

LOL, unless you have centre lock hubs mate, no chance. even out old 996 cup car has centre lock 18inch BBS wheels.

you could fit the fronts off a porsche cup car all round on your GTR but in my experience the rears are too wide for a 32, could be ok on 33 or 34 though.

the mini challenge don't run slicks, they use R comps....

not sure why you'd want to buy porsche size/offset/PCD wheels to put on a GTR anywy though. what is wrong with the 1million different types of wheels available for GTRs? we are blessed with so much choice of wheels made specifically to suit the car, there is no need to tax them from other cars.

just the tyre size i was after :D

wheels might have been a bonus thats all..

perhaps the mini might be better as i have 17's i am not sure about them yet.

Edited by Angus Smart

A heap of guys in porka road cars buy then second hand up here $100 each used iirc.

better times outta them used than new RE55s... and a 1/4 of the price...

If I recall they are 255x18 or something, I will see if I can look back through some e-mails...

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...