Jump to content
SAU Community

Recommended Posts

it's not the Nismo option kit, It's the 'sports' option kit made by Altia.

The Nismo kit is very rare and looks different, but very nice though.

my bad, had it in my head that the Nismo option was the same thing Nismo/Altia kit

do we have pics in here of the nismo factory option?

I thought seeing as I am a new R34 owner I should contribute to this thread, this is what I'm putting on my four door :ermm:

Nismo S Tune Bodykit:

strange_drive_jp-img600x400-1268817.jpg

strange_drive_jp-img600x400-1268-1.jpg

The only change I am making is putting on the factory pods instead of the Apron.

It's a shame a lot of the pics on the first page are broken. I was looking forward to seeing all the kits side by side :)

I have a genuine C-West kit on my 34 GTR and I love it, with 10.5" rims it makes it look like it's got a wide body :)

  • Like 1
Wow, check these out for the R34 taxis!

3p_image_05.jpg

3p_image_08.jpg

bankin.JPG

4 door wide body kit???

Looks much better than URAS IMHO.... Can anyone else garner any info on APM??? Never heard of them, but I like their stuff!!

Look, rear 4 door LED's as well!!

89a08ab41f.JPG

http://www.apm.jp/index.html

Got a mate in Japan calling them tomorrow to find out prices if anyone is keen :blush:

Can any-1 link me to the following body kits to buy in Australia

Impul

Do Luck

Cross factory

done some searching in google etc but didn't come up with much :blush:

www.jessestreeter.com

ok since i cant edit that last post, to confirm, the Kagotani gtr does infact wear a one off custom built GT Style widebody kit, so unfortunately we cant have one :D

Sunline make a similar style but it's exxy. Tough as f**k though.

it looks better with the graphics on guys

check it out:

without eyelids:

16092009571.jpg

with eyelids:

17092009580.jpg

That's yours?

Please stop styling cars.

Leave it to people with taste.

Thanks.

Edited by BTM
Cara's eyelids are eastbear copies!

The do luck R34 above is actually a real kit and costs $10,000 so fyi its pretty "off tap" and yes it looks good. Sure wheels dont work but hey its his car.

So because the guy has poor hook ups with Japan and pays WAAAAY too much for his stuff, it makes it good? Seriously I'm not surprised it's a Sydney car. No taste, claiming to be sex spec.

I don't know why people are complaining about that miss34's CM4 front bar......

it looks alot better than some of the other ones i've seen

The Uras front bar makes me wanna sing "I'm Mr Plough, that's my name, that name again is Mr Plough".

The Bomex one makes it look more like a supra with a kit.

and some of the others eg. Nismo, look like they are standard factory kits.

plus it's a bit different to the usual boxy skyline bars, without being spaz like a Veilside.

Thinking of getting one myself now =)

LOL.

That is all.

Edited by BTM
Factory option Nismo kit, should be somewhere in this thread already

Can probably find it at most bodykit places, psiparts.com.au, modyourcar.com.au etc...

If you want an original plastic one, your best best would be to have someone track one down in Japan and air freight it over for you.

www.jessestreeter.com is definitely what I'd go through :blush:

Edited by BTM
and that is coming from someone that owns a silvia *tsk tsk*

Silvias are very stylish, just not the s13 or s14 prefacelift.

personally i don't like your front bar due to the up turned bit in the middle and also not a fan of big eyelids.

But each to there own i guess, no one is obliged to look at your car if you drive past so its not like your forcing them to hurt there eyes. :)

Edited by R34 -_-
Got a mate in Japan calling them tomorrow to find out prices if anyone is keen :)

Interested, but I hate to imagine what they'll cost.

I also seem to recall DAN666 is in early stages of doing a kit for R34 coupes/sedans LED conversion...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...