Jump to content
SAU Community

Recommended Posts

it's not the Nismo option kit, It's the 'sports' option kit made by Altia.

The Nismo kit is very rare and looks different, but very nice though.

my bad, had it in my head that the Nismo option was the same thing Nismo/Altia kit

do we have pics in here of the nismo factory option?

I thought seeing as I am a new R34 owner I should contribute to this thread, this is what I'm putting on my four door :ermm:

Nismo S Tune Bodykit:

strange_drive_jp-img600x400-1268817.jpg

strange_drive_jp-img600x400-1268-1.jpg

The only change I am making is putting on the factory pods instead of the Apron.

It's a shame a lot of the pics on the first page are broken. I was looking forward to seeing all the kits side by side :)

I have a genuine C-West kit on my 34 GTR and I love it, with 10.5" rims it makes it look like it's got a wide body :)

  • Like 1
Wow, check these out for the R34 taxis!

3p_image_05.jpg

3p_image_08.jpg

bankin.JPG

4 door wide body kit???

Looks much better than URAS IMHO.... Can anyone else garner any info on APM??? Never heard of them, but I like their stuff!!

Look, rear 4 door LED's as well!!

89a08ab41f.JPG

http://www.apm.jp/index.html

Got a mate in Japan calling them tomorrow to find out prices if anyone is keen :blush:

Can any-1 link me to the following body kits to buy in Australia

Impul

Do Luck

Cross factory

done some searching in google etc but didn't come up with much :blush:

www.jessestreeter.com

ok since i cant edit that last post, to confirm, the Kagotani gtr does infact wear a one off custom built GT Style widebody kit, so unfortunately we cant have one :D

Sunline make a similar style but it's exxy. Tough as f**k though.

it looks better with the graphics on guys

check it out:

without eyelids:

16092009571.jpg

with eyelids:

17092009580.jpg

That's yours?

Please stop styling cars.

Leave it to people with taste.

Thanks.

Edited by BTM
Cara's eyelids are eastbear copies!

The do luck R34 above is actually a real kit and costs $10,000 so fyi its pretty "off tap" and yes it looks good. Sure wheels dont work but hey its his car.

So because the guy has poor hook ups with Japan and pays WAAAAY too much for his stuff, it makes it good? Seriously I'm not surprised it's a Sydney car. No taste, claiming to be sex spec.

I don't know why people are complaining about that miss34's CM4 front bar......

it looks alot better than some of the other ones i've seen

The Uras front bar makes me wanna sing "I'm Mr Plough, that's my name, that name again is Mr Plough".

The Bomex one makes it look more like a supra with a kit.

and some of the others eg. Nismo, look like they are standard factory kits.

plus it's a bit different to the usual boxy skyline bars, without being spaz like a Veilside.

Thinking of getting one myself now =)

LOL.

That is all.

Edited by BTM
Factory option Nismo kit, should be somewhere in this thread already

Can probably find it at most bodykit places, psiparts.com.au, modyourcar.com.au etc...

If you want an original plastic one, your best best would be to have someone track one down in Japan and air freight it over for you.

www.jessestreeter.com is definitely what I'd go through :blush:

Edited by BTM
and that is coming from someone that owns a silvia *tsk tsk*

Silvias are very stylish, just not the s13 or s14 prefacelift.

personally i don't like your front bar due to the up turned bit in the middle and also not a fan of big eyelids.

But each to there own i guess, no one is obliged to look at your car if you drive past so its not like your forcing them to hurt there eyes. :)

Edited by R34 -_-
Got a mate in Japan calling them tomorrow to find out prices if anyone is keen :)

Interested, but I hate to imagine what they'll cost.

I also seem to recall DAN666 is in early stages of doing a kit for R34 coupes/sedans LED conversion...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...