Jump to content
SAU Community

Recommended Posts

haha dude you've definitely got a cannon.

General rule of speaking is, if some says its got a "cat back" exhaust it means it's got a 3" or bigger exhaust from the catalytic converter to the exit. Now it probably has a resonator (oval or hot dog shaped muffler) before your cannon and this will quieten down the noise, so that's most likely why it's not loud.

Take a peek under your car, you'll understand.

Edited by KeyMaker

remember your car is a lot quieter on the inside than it is hearing it from the side of the road. also, the sound doesnt just come from the end. the whole length of the exhaust contributes. so post a pic of the other bits if u can. it looks like you've got a catback atleast though

that doesnt look like a 3 inch to me. hard to tell the size from a pic though.

also, that middle muffler, before your diff, is quite a good size. that will reduce the sound by a fair bit.

thats not necessarily a bad thing. as long as it flows well.

Edited by Munkyb0y
from the second picture, it looks like you have a mid muffler so that would be contributing to the quietness of the exhaust

+1

Like you said.

Also check out your Cat converter and put a high flow one in.

Dude, be proud you got it quiet and it responds well.

I regret not making the first mod a exhaust downgrade / upgrade.

Currently running 3" with a 3 or 4" cannon.

And for gods sake, the noise it makes it nice and loud, but i would kill for some stealth.. it gets really really annoying when your just cruising it at about 2 in the morning going home, and have to keep it on low revs at 5th gear just to muffle the noise!

Trust me, if its quiet, and your not dampening any performance, i cant stress how much you should keep it as it is.

You dont need to prove what your ride can do man just by how it sounds. Dun worri bout' them Commodores with loud ass exhaust systems, but are total nuggets.

Just my opinion man, your lucky in my books dude.

MRXTCZ

You dont need to prove what your ride can do man just by how it sounds. Dun worri bout' them Commodores with loud ass exhaust systems, but are total nuggets.

Just my opinion man, your lucky in my books dude.

MRXTCZ

Lol yeah maybe ur right lol @ commodores

Maybe i am lucky :(

I will just leave it how it is. It still sounds good when i am reving it.

Yeah it is N/A.

Why doesnt it look 3" ?

When u say 3" do u mean the tip is 3" or the whole pipe from the front is supposed to be 3" ?

When we say 3" we mean the whole exahust system. Since your car is N/A you don't want a too big of an exhaust system cuz you will lose power.

we mean the whole pipe not the tip.

being N/A kinda answers your question as to why your exhaust isnt as loud as other skylines.

+1

Dude, be proud you got it quiet and it responds well.

I regret not making the first mod a exhaust downgrade / upgrade.

Currently running 3" with a 3 or 4" cannon.

And for gods sake, the noise it makes it nice and loud, but i would kill for some stealth.. it gets really really annoying when your just cruising it at about 2 in the morning going home, and have to keep it on low revs at 5th gear just to muffle the noise!

Trust me, if its quiet, and your not dampening any performance, i cant stress how much you should keep it as it is.

You dont need to prove what your ride can do man just by how it sounds. Dun worri bout' them Commodores with loud ass exhaust systems, but are total nuggets.

Just my opinion man, your lucky in my books dude.

MRXTCZ

LOL! I put my Blitz Cat Back on last weekend for the 1st time after 3 years and the rumbling drone was killing me. LOL! I forgot how loud it is.

dont go 3" on a N/A. you'll lose back pressure and performance ive heard

+1

The most you would go is a 2.5" or 2.25". So VishR33 what you got on atm should be fine and leave it on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...