Jump to content
SAU Community

Recommended Posts

In regard to the more fuel argument, even if you do get more fuel in there, the cylinder's the same size so the exhaust gases would be the same volume (unless more volume of air was in there) or would it be less because you know have more fuel and less air?

I never was that good at understanding engines :blink:

If you put more of anything in the front, you get more out the back.

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

Of course, I've no idea what I'm talking about.

Furthermore, I guess there's no going back to 98pulp after you build a high comp engine. And on the track, most engines are on boost rather than off. So it's prolly not viable.

But is it possible?

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

Of course, I've no idea what I'm talking about.

Furthermore, I guess there's no going back to 98pulp after you build a high comp engine. And on the track, most engines are on boost rather than off. So it's prolly not viable.

But is it possible?

Very possible - we intend on running more compression with the F6 we are building atm, aiming for around 850rwhp on E85.

Very possible - we intend on running more compression with the F6 we are building atm, aiming for around 850rwhp on E85.

i think its more of a reality then a posibility, just look at the compression ratio alcohol / methanol cars run.. over 11:1

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

yep for sure.. the higher effective octane rating of E85 means you can squander that advantage either

with higher boost at the top end, or much higher compression to gain more torque everywhere although

at higher compression I guess this would diminish the ultimate boost limit at the top.. where the headline

power figure is made.

Now what you really want is a variable compression ratio engine! that would be the best, especially

if you combine with variable cam timing.

compare the flexibility of a hawk's wing to the relatively fixed wing of a plane! smart variability should be the ultimate

goal of every machine..

i think its more of a reality then a posibility, just look at the compression ratio alcohol / methanol cars run.. over 11:1

Is that N/A or boosted tough.

E85 would be awesome if you were turbocharging a normally N/A car. No need to reduce compression.

ok so i have a rb25+t turbo conversion, with higher comp ratio,

what would i have to do to run this fuel, apart from a tune, bigger injectors?

the car already has the usual mods, bosch 023 pump, Fmic, full exhaust, and getting a remap soon,

thanks, sorry if it has been covered, but 20 pages is a lot of reading lol

put on decat today and run it up again

I cant believe the results mate, amazing!!!

340rwkw out of a .68 housing. Thats GT35R territory.

Cant wait to get mine on the road and tuned on this stuff.

I cant believe the results mate, amazing!!!

340rwkw out of a .68 housing. Thats GT35R territory.

Cant wait to get mine on the road and tuned on this stuff.

Yeah still blows me away....You wont be dissapointed thats for sure

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

Anthony,

There are two Enhance service stations that sell e85 that are about 15 mins from WSID: Coner of Rawson and Ferndell, South Granville, and Hume Highway, Carramar (south side, just west of Meccano lights).

Anthony,

There are two Enhance service stations that sell e85 that are about 15 mins from WSID: Coner of Rawson and Ferndell, South Granville, and Hume Highway, Carramar (south side, just west of Meccano lights).

thanks charlie..

was good meeting you yesterday, thanks for saying hello!

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

I am if i can get my engine run in properly before hand.

I have 2x 20L drums that will be filled with E85 that i will be taking just incase.

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

im keen...need to add a 2nd set of injectors though...and maybe another fuel pump.

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

/nods

okay.. im going to do the switch back to e85 on the second week of feb.. i went to the united servo in newcastle and asked them about e85, the guy had no idea what i was on about and gave me the nsw area managers number.

Im going to be ringing him up and hassling him :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...