Jump to content
SAU Community

Recommended Posts

its not that the tanks have to be majorly different

its that only 1 brand of tank has paid for the required R&D to be able to certify they are safe

and they charge a mint for their tanks

Just got an email from PJ (Paul) and he just ran 503 rwhp on the JEM dyno with 25 psi on a 3076 and 1.12 exhaust housing on E85 with 1600cc indy blue injectors.

He mentioned they did run up to 27.5 psi boost and made more power but were concerned for the intregity of the SR20 block as it wasn't sleeved.

376 rwks' has surely got to be a record out of a 3076 on any engine.....

He was frying 4th on the M5 :)

Mine will be getting tuned next week.

I made 348 at 19psi.23psi will be the aim next week, id like to see what 25psi makes on the RB though.

PJ also has water injection, so that would keep the air charge temps way down.

Im excited!!! :)

He was frying 4th on the M5 :)

Mine will be getting tuned next week.

I made 348 at 19psi.23psi will be the aim next week, id like to see what 25psi makes on the RB though.

PJ also has water injection, so that would keep the air charge temps way down.

Im excited!!! :)

Yes frying 4th at 160klm's.

He wasn't using the water injection in that 503hp dyno run.....insanely enough there is more power to come.

So he's found and extra 50 odd rwhp from the bigger ex housing, 1 psi more boost, upgraded fuel system, M&W CDI and retune.

He also mentioned EGT's were way down with the larger ex housing - as you would expect.

Been there done that. after a few sets of tyres you wonder what the fuss was all about in the first place.

With a 3076 tho? OK techically PJ is running a T25 flanged HKS 56 trim 3037 on a 2 litre.

Bigger turbo's on bigger engines make bigger torque so you'd kinda expect more fryability.

Edited by juggernaut1
With a 3076 tho? OK techically PJ is running a T25 flanged HKS 56 trim 3037 on a 2 litre.

Bigger turbo's on bigger engines make bigger torque so you'd kinda expect more fryability.

regardless of turbo / setup, you get over it after a while :)

regardless of turbo / setup, you get over it after a while :)

Haha....yes always modifying for that bigger "fix" once you get used to it.

I'm always fascinated how enthusiasts are raising the bar all the time - its amazing what people are screwing out of there motors these days.

However, what was awesome last year is average this year....and so on......where will it ever end. :)

Quick question people. What will 555cc injectors run out at roughly (kw) when using E85 on a gts-t?

About 340rwkw on std pressure using BSFC = 0.6(which is about what I've found).

BTW I've made just over 600rwhp on E85 using 60LB/hr(630cc/min) with 4Bar base pressure on an XR6T which confirms my BSFC calc of 0.6.

Just got an email from PJ (Paul) and he just ran 503 rwhp on the JEM dyno with 25 psi on a 3076 and 1.12 exhaust housing on E85 with 1600cc indy blue injectors.

He mentioned they did run up to 27.5 psi boost and made more power but were concerned for the intregity of the SR20 block as it wasn't sleeved.

376 rwks' has surely got to be a record out of a 3076 on any engine.....

I'm running RB25 with a .68 on a 3037 Pro S.

Standard Manifolds E85 etc etc.

post-46183-1246700127_thumb.jpg

Edited by RB25DETS2

that is some off the chart torque there champ....

must be hell of a ride...

what other supporting mods?

also at what revs is it making full boost?

Edited by allthewaytotheskyline
that is some off the chart torque there champ....

must be hell of a ride...

what other supporting mods?

Yeah mate lots of fun.

Just the normal stuff

PFC

HKS Turbz

850 Sard injectors

Blitz LM cooler

Blitz POD

Standard BOV

Z32 AFM

Nismo FPR

Bosch 044 in tank

Gizzmo EBC

oh and lots of boost :D (23psi)

where is the torque read out?

Heres a torque read out just for you GT....180or200's car in red (3582 .82) and mine in blue(3037 .68) overlayed on the same Dyno.

post-46183-1246776429_thumb.jpg

Heres a torque read out just for you GT....180or200's car in red (3582 .82) and mine in blue(3037 .68) overlayed on the same Dyno.

900nm, nice.. my car was making around 1080nm to 1180nm but it never had a aggresive tune, 500cc don't make too much difference.

Yeah mate lots of fun.

Just the normal stuff

PFC

HKS Turbz

850 Sard injectors

Blitz LM cooler

Blitz POD

Standard BOV

Z32 AFM

Nismo FPR

Bosch 044 in tank

Gizzmo EBC

oh and lots of boost ;) (23psi)

standard internals? 23psi??

what's with people running massive boost on un-opened engines?? i think hamish is like 23psi as well on his 33?? :P

The pressure from pre-ignition is far greater, since E85 doesnt have that problem should be fine! I've seen Lee's car hold 30 psi on the road on a cold night, that was radical!

Edited by 180or200

well i would presume (based upon what ive read) due to detonation and all, with e85 which dies off once it hits its top end of power instead of detonation that it would be much safer to push more boost without the knock.

although...i may just be wrong.

people still think that E85 is the ticket to more safe power. This is not the case! you are still limited to the engines internals.

it is easier and safer to make the power but if you are using standard internals or have a weak engine it will still break.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...