Jump to content
SAU Community

Recommended Posts

Thanks guys ;)

Sure I can give you basics :P

It's an SR20VE+T now, big custom cams, sleeved / forged bottom end, modded Precision turbo on 6boost manifold, ported head, oversized valves etc, Bosch 2000cc injectors, custom plenum, Plazmaman throttle body.

sounds wicked. there is some cool stuff happening around the place with the SR VET heads going on to SR20s. but your thing is out of this world. I'd like to come check it out one day soon. :)

It's an SR20VE+T now, big custom cams, sleeved / forged bottom end, modded Precision turbo on 6boost manifold, ported head, oversized valves etc, Bosch 2000cc injectors, custom plenum, Plazmaman throttle body.

Thats awesome, its a PT6765 I'm guessing? The Precision and the FP-HTA billet turbos are wicked pieces of kit, good to see them catching on down this part of the world. I am hoping that soon I'll be able to report some results for a built RB25 running a PT6765 on E85... that should be quite interesting.

  • 2 weeks later...

cheers mate, allways keen to try new things!

Yes i used to get 380 to 450km's to a tank with BP98 depending how i drove it. I came up with a magical number in my head when making up the map in datalogit on my pc at home which was spot on, and its no way near double then what it was, but i will say it is more then 25% consumption.

My gtr uses bout 20 litres per 100 ks I did a trip from.Brisbane to.tweed on.the weekend and.went through a tank in 180 km mind u its a very very heavaly modified engine

cheers mate, allways keen to try new things!

Yes i used to get 380 to 450km's to a tank with BP98 depending how i drove it. I came up with a magical number in my head when making up the map in datalogit on my pc at home which was spot on, and its no way near double then what it was, but i will say it is more then 25% consumption.

My gtr uses bout 20 litres per 100 ks I did a trip from.Brisbane to.tweed on.the weekend and.went through a tank in 180 km mind u its a very very heavaly modified engine

  • 2 weeks later...

Finally joined the E85 club! RB25 Neo with super responsive turbo making 242rwkw on 98 and 279rwkw on E85! Very happy

Havent tried cold start yet but my idle is smoother than on 98! Thanks Trent from Status Tuning and Tao from Hypergear turbos!

post-29432-0-66365500-1313121774_thumb.jpg

post-29432-0-97175300-1313121793_thumb.jpg

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

turbo's -5's

exhaust 3in full system incl 3in decat

nismo AFM's

std airbox

K&N air filter

1000cc injectors

Nistune ECU

twin walbro in tank fuel pumps

ARC 70mm intercooler

silicone I/C piping

std cams (recond when engine rebuilt)

forged bottom end

Mines dump pipes

std manifolds

that's pretty much it

That is very low power for -5s on 98 fuel. I would fix whatever the issue is holding that back. Should be able to make around 350rwkw on 98 first. 318 is -7 or -9 power. Whatever restriction you have may be holding back your E85 results in a more significant way.

honestly in my experience it's in the ball park. having seen dozens of cars with -5s most often they make between 310 and 340kw at 20-22psi. 353kw on E85 is not bad. perhaps a little low but every car and every dyno is so different as long as it's performing it's not worth worrying about.

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

11:8 to 12 AFR is the sweet/safe spot. Leaning it out a bit will net you some gains.

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

11:8 to 12 AFR is the sweet/safe spot. Leaning it out a bit will net you some gains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...