Jump to content
SAU Community

Recommended Posts

This is my own vehicle/project.

I am building it as an all rounder.

It will be driven every day.

It will run on Liquid injected LPG.

It will start life as an Auto with a paddle shift setup. until the box goes bang.

It will be replacing my BA XR6 Turbo (nice car=boring)

CIMG4564.jpg

CIMG4563.jpg

CIMG4566.jpg

CIMG4560.jpg

CIMG4561.jpg

CIMG4552.jpg

CIMG4555.jpg

CIMG4557.jpg

It has a new aussie front bar.

Don't need cut-out for factory cooler anymore.

So not painted as may need trimming.

The rear end is R33 GTS-4 with R32 GTR diff, driveshafts and hubs.

Should be beefcake enough.

Will be running an Autronic SM4 ecu with Liquid Injected LPG.

The auto is unknown for torque handling yet.

If it blows then a Z32 VG30DETT manual box goes in.

Coil overs are S14 front, R33 rear, BC from wholesale suspension 7kg front springs 6kg rear. Adjustable height and damper settings.

Boost will be 7psi low in rev range increasing to 15psi at 7200rpm. To give the auto some sort of chance.

Wheels are Lenso 18 x 8in 235/40/18 45offset. Khumo Ecsta Sports tyres.

Brakes are R32 GTR front disc and calipers DS2500 Ferodo track pads. Rear are R33 GTS-t DS2500 as well.

No Hicus.

Aiming for 400rwkW.

Any more info just ask.

Thanks.

was wondering how you'd even think to use the power with a HR rear end... then i see a hybrid - good work :P

HR31 is fail for power, ive struggled for years lol.

Looks great, keep the updates coming!

Came very very close to building the exact same thing in my old hr31 gts 4door a few years back - even had the vh45 organised.

Be interesting to see how yours turns out - there was a guy over here with a single turbo vh45 in a z31 many years ago, factory auto making around 400rwhp, I wanted to make considerably more but we werent sure how the motor would cope.

i notice you went to rta castle hill, hope i can see the final product (assuming your a hills boy and may be lucky enough to see this thing driving around soon)

correct me if im wrong but arnt those cheap and nasty ebay spec t3/t4 turbos....

These turbos are 440hp each from Hypergear in Melbourne

They have chinese housings, garrett exhaust wheel with full 360deg thrust bearings modified twin oil feed passages and garrett full floating bearings and balanced in Australia.

Internal gates plated up and Turbosmart 50mm external gates now fitted.

I've used these turbos before on conversions with no problems, and run 20psi.

Hypergear have optimised these turbos for high performance use.

Hi there , we've been there (IRS conversion) in a Bluebird years ago but luckily for me my mentor (one of them) has been doing rally car fab work most of his adult life and used to run Road and Rally Center .

I'm curious as to how you fitted the rear cross member mounting pins .

In Aust Bluebirds (910's) the holes are there but that section is double skinned and the inner skin is not a through hole .

What AJ did was to remove the hopeless 4 link body mounts and offer up the bare x member to chek mount hole alignment - mainly because we were fitting a DR30 R200 long nose rear end .

R30's usually have the mount pins welded to strengthening plates inside the rear rails but to make ours fit I chopped the taper mount tubes out of 280ZX wrecks from Pick and Payless . I think the tapered pins were 1600 Datsun .

Anyway as I'm sure you'd know the crade has to be very securely mounted to the shell .

One really easy mod we did was to fill the air holes in the X member bushes up with Stikaflex , takes two days because a fair bit was used and a full day to let it set was needed each side . R30's have soft bushings and IRS R31's are even worse - particularly the "rear steer" ones .

If I had the time I'd remove the pineapples from my R33 and stickaflex it too . Best of luck , cheers A .

check out nico club for a wealth of information on the vh45de (and +tt projects)

as far as i can recall, the vh45de auto box is the same auto box (internal wise) as the 300zx vg30dett auto box, so it should be good for a fair bit of torque. a rebuild kit or a transmission cooler would be good if you're looking to keep it alive at 400rwkw.

fitting a manual box will require some custom fabrication or an adaptor plate for the 300zx manual box. these are available from mazworx in the US. check out their site for details and pricing.

there is a user on nico club running your exact setup (vh45dett and lpg injection). running about the same power levels as well. except his engine is in a SUV of some sort, i think it's a nissan patrol.

i dont think the tranny or the differential will be stressed too much, you'll probably lose traction before being able to put too much torque through the drivetrain to break anything. hopefully anyway

this wouldnt be mark from mrc by anychance?

Yes,

Mark from MRC.

Ive done heaps of research on these engine/gearboxes.

I don't know however the torque handling of this standard unopened 2nd hand box.

I have an adapter plate for VH45 to VG30dett manual box.

All going well so far with build.

Exhaust system attacking next week. Catco twin 3in Race cats(706.2cfm each) and twin 3in system. 3 mufflers.

New metal backed guides, tensioners, waterpump, thermostat and crank seal fitted as major service items.

Cheers guys for input.

  • 2 months later...
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...