Jump to content
SAU Community

R34 Gt/gt-t To Gtr Guage Cluster Conversion

Project-GT4-TT

By Project-GT4-TT,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

camperbob Newbie

camperbob

Posted
Posted

heloo.


i have been tying to install Nismo R34 GTR cluster in my GT,

most all working accept the speedometer end the central door lock.

engine Waring light : error speed sensor. is it possible to get pic of how it the cables are connected.


regards CB

  • 2 years later...
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

NZ-GTT
NZ-GTT

If you need instructions to do this after reading the whole thread you should not attempt this.

NZ-GTT
NZ-GTT

I have just completed this conversion and have updated the Excel document. I found an error on it and also added a few missing pin outs.GTR_Guage_Cluster_Conversion3.xls I can confirm everything works

*rb26debt*
*rb26debt*

gtt manual coupe swapped to gtr pins. double check before you do this and take good pictures before you touch yours    

Posted Images

  • 8 months later...
  • 2 years later...
  • 6 months later...
  • 2 months later...
NZ-GTT Collaborator

NZ-GTT

Posted
Posted

I have just completed this conversion and have updated the Excel document. I found an error on it and also added a few missing pin outs.GTR_Guage_Cluster_Conversion3.xls I can confirm everything works on my car, it is a GTT manual. The centre plug at the back of the cluster is different between GTT and GTR. The GTT is a brown 24 pin plug and does not plug into the white GTR 24 pin socket, I modified mine to fit using a hacksaw blade and needle file. I also swapped the lense over to the GTR cluster for the Slip and TCS off lights. 

  • Like 2
  • 1 month later...
  • 5 months later...
Nick92 Newbie

Nick92

Posted
Posted
On 19/07/2013 at 8:06 AM, camperbob said:

heloo.


i have been tying to install Nismo R34 GTR cluster in my GT,

most all working accept the speedometer end the central door lock.

engine Waring light : error speed sensor. is it possible to get pic of how it the cables are connected.


regards CB

Hey i know its a looogshot but did you ever figure it out becuse i havet the same problem 

  • 4 weeks later...
  • 5 months later...
*rb26debt* Enthusiast

*rb26debt*

Posted
Posted
14 minutes ago, NZ-GTT said:

Nice work! How did you remove the pins from the connector blocks? I could not get mine out so I had to cut and solder wires.

a pin from the opposite side the wires hang out. through the inside hole.  i did this January 3, 2016 from my previous post date. the pictures are from then

  • 3 weeks later...
  • 2 months later...
  • 4 months later...
NZ-GTT Collaborator

NZ-GTT

Posted
Posted

Oops good pick up! I just rechecked my pinouts and it should be 10 to 9 and 63 to 11. I've corrected the error and uploaded the file in this post as version 4.

GTR_Guage_Cluster_Conversion4.xls

M-Scope Newbie

M-Scope

Posted
Posted
On 7/27/2021 at 2:08 PM, NZ-GTT said:

Oops good pick up! I just rechecked my pinouts and it should be 10 to 9 and 63 to 11. I've corrected the error and uploaded the file in this post as version 4.

GTR_Guage_Cluster_Conversion4.xls 37.5 kB · 1 download

Thanks for the correction!

Another thing, non gtr pin 17 and pin 46 both move to non gtr pin 57.

Can you check if it is correct?

pin 17 is rear defog signal and pin 46 is charge w.l

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...