Jump to content
SAU Community

Whats The Going Price To Sell A 33 Gtst

m0rt

By m0rt,
in Queensland

 Share

Recommended Posts

m0rt Enthusiast

m0rt

Posted
Posted

Hey guys,

Thinking of selling the skyzamaline atm, but have bugger all idea on what is a goin price. Have looked at car point and car sales and pretty much all the ones i saw were ex show cars or fully built up runnin lots a horsies at the wheels.

Mods that have been/ i have done to the car are; 400R front bar, pod filter, FMIC, imitation greedy plenum, boost contoller, ally radiator, gates timing belt, adjustable exhaust pully, splitfire coil packs, jim berry clutch, 18" rims (will have new rubber when i get off my ass) HICAS lock out bar, Bosch 040 fuel pump, momo steering wheel and gear knob, white leather gear and p/brake boots, oil gauge boost gauge, HKS turbo timer, Mongoose alarm, pionner head unit with 6" splits in the front and 6" in the rear and its got bout 160000Km on the clock. Almost forgot also has bilstien shocks, pedders springs in the front, whiteline front and rear sway bars and diff cradle bushes i guess you'd call them.

Damage to the car is a L shaped crack on the front bar on the r/h side where it bolts on and scrapage on the front lower surface, and paint fade on the rear l/h corner of the roof.

Any info much appreciated

Rhinorebel Grand Master

Rhinorebel

Posted
Posted

With those mods, and I know it doesn't mean too much, but what year is it and what colour???

And how can you sell it before the Skyline Charity Cruise??? And we need more Skylines in Springfield!!!!

m0rt Enthusiast

m0rt

Posted
  • Author
Posted
With those mods, and I know it doesn't mean too much, but what year is it and what colour???

And how can you sell it before the Skyline Charity Cruise??? And we need more Skylines in Springfield!!!!

the build plate says 93 but the rego papers say 94 so lucky dip?? Its a bluey colour can look green in some light with a grey strip along the bottom.

I won't be able to make it to the charity cruise unfortunatly, works sending me to the sunny Katherine in the NT till the start of Dec :O

I see bugger all over here ay, nothin to call regulars, see the odd one pulled up at someones house and stuff

m0rt Enthusiast

m0rt

Posted
  • Author
Posted
Have u got any pics?

First pic is when i bought the car.

The other ones are from when i got it back from the panel beaters.

Or did you mean pics of the damaged stuff?

post-34833-1225496661_thumb.jpg

post-34833-1225496758_thumb.jpg

post-34833-1225496811_thumb.jpg

m0rt Enthusiast

m0rt

Posted
  • Author
Posted
thats one of the nicest series 1's I've seen!!

Very nicely moded too.

Are you taking it to Katherine?

If you come through Alice say hi, come for a cruise...

Cheers mate :)

Nah only in Katherine for 4 weeks, flyin up on a business jet :O

ido09s Mentor

ido09s

Posted
Posted
Series 1 with that many km's lightly mod'ed probablly 12k at best...

about on the money if you ask me. Had a customer with a perfect low klm series 2, only mod was some wheels, and he struggled to get $14k for it. Was a damn shame as it was the best 33 GTST i had seen come through work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      "Cheap" bolt on turbo on RB25DET NEO

      By Murray_Calavera · Posted

      The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • GTSBoy
      new here

      By GTSBoy · Posted

      I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...