Jump to content
SAU Community

Group Buy: R33 Gtst And R34 Gtt Cold Air Box Cover


Recommended Posts

Nissan Skyline R33 GTS-T and R34 GT-T Brand New Cold Air Box Cover which is designed to house Pod Filters.

This assists to reduce power loss caused by the sucking in of hot air from the turbo.

The box is made of ABS plastic, and features allen key bolts and nut inserts.

$50.00 each

Some adjustments may be required when fitting, depending on your intercooler and setup.

Pictures are example pictures of a R33 Series 1 1993 Skyline with the Cold Air Box Cover fitted and R34 GT-T. All piping are the same the only difference between the two models is the catch can behind the headlights are different so around that area its not a flush fit in a 34 but is not noticeable. (as shown in pic)

The example skyline R33 is set up with a Hybrid front mount intercooler and APEXI pod filter.

The cover will definitely fit the GTS-T without many adjustments as it did for me,

but I am not sure how well it suits with other models. (adjustments may be required)

The example R34 is also set up with a Hybrid Front mount cooler with a Drift pod filter.

As tested the cover will fit a 34 GT-T but you may require some adjustments depending on cooler size

You are welcome to view the item and pick up in south-east Melbourne, or postage at buyers expense.

You may pm me or post here if you require further detail.

How this will work is we will need at least a minimum of 15 confirmed numbers to get these made, and either a deposit or full payment of the item may be required as I do not have the funds to get a huge number of these made up at once but this will be confirmed within the next day or so.

PICS WILL BE POSTED TONIGHT

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

thats great guys keem them interest coming

pics will be posted tonight. works being gay and wont let me go onto photo bucket.

sorry about the delay guys but here are the pics

these are for R33

post-a187181-air-box.jpg

post-a187182-air-box-2.jpg

P021108_131901.jpg

and here are the R34 pics. now the side panel are the same the only thing of concern was the top cover but as you can see it all fits very well

P021108_1317.jpg

P021108_1319.jpg

and this is the pic of the side panel. first hole if for air intake pipe and second hole if for cooler pipe feeding into the cooler

P021108_1318.jpg

arrgghhh how about a R33 GTR! in fo shiz if you can swing it to get made too,

sorry mate but GTR at this stage is a no go as we only have template for us poor folks with GTST's and GTT's lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...