Jump to content
SAU Community

Recommended Posts

Originally posted by Blitz

Have you had any first hand experience with hitman Tosh or are you commenting on what you have heard?

my car got tuned by hitman 3 times (due to some hardware changes) and also been to one of the place which is on the list up there... very happy with hitman, not so happy with other shop if not frustrated.

Link to comment
https://www.sau.com.au/forums/topic/24507-tuning-workshop/#findComment-525238
Share on other sites

  • 6 months later...

I can recommend Hitman to anyone here! He beats other people on the list above (both what i've heard and experienced) and is always willing to explain anything he is doing or answer any questions you may have. He does do mainly road tunes, but for the cost of hiring a dyno, he'll dyno tune as well. He spent about 4/5 hours on my car, just tuning to pass an emissions test...i was very impressed!! Just an example of how through he is.... :(

He was at the cruise on friday night...i'm sorry i didn't do a good job of introducing him around! He is also on the forums (Hitman) so i guess PM him with any questions?

Link to comment
https://www.sau.com.au/forums/topic/24507-tuning-workshop/#findComment-725167
Share on other sites

Ok I have been to both Hills & UAS for tuning and Unigroup for Dyno runs.

Here are the facts - these are what I have seen with my own eyes - And please keep in mind that I didn't know shite back 12-18 months ago.....

Hills tune:

Car on Dyno. Tuner in car with laptop. Friend of tuners listening in engine bay (ie using his ear under the bonnet) Hand signals for yes pinging, or no OK.. No Dyno print out, not AFR. No timing light.

We all know what happened after my last tune there.

UAS Tune:

Multiple AFR meters hooked up - Knock earphones, Boost and AFR dialed into Dyno - Printed Dyno graph at the conclusion. Timing lights and many other safety precautions taken - Biggest fan eva at the front of car !

Unigroup dials in AFR and boost - and seem very competant - but never tuned there.

Ben at UAS is really good with the Microtech and good with PFC - He will tune other's too, but may take more time - just to be carefull - But with UAS - You do not pay for their learning and always take much care. So good for them and good for you !

Up to you - Unigroup are very good with Apexi - and I would take my car there to tune.

I also know where I WOULD NOT take my car again. Nuff said.

I hope my real life experiences help.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/24507-tuning-workshop/#findComment-725337
Share on other sites

i've had c&v tune my powerfc twice. once on install and the 2nd time after the boost was raised. overall i think they are a little overpriced and the tune wasnt spot on. con could've spent abit more time on it for the money he charged. both were dyno tunes.

the hitman has tuned it since, mainly concentrating on mid range and top end. commented that the previous tune (ie. c&v's) was fairly scrappy in areas, but ok in others. top end was running a little too lean for matt's liking apparently.

im happy with matt's tune except my low end and mid range is a little temporemental. i get detonation and my powerfc can register up to 140-150 on the knock meter. but power is sensational in all areas. so matt, if your listening, when is your laptop software ready to hook into my car and when can you put the gold plating on my tune! :)

i've spent about $700 so far on tuning. the question arises, would i have been better off spending the same sort of money on a once off tune at CRD who is apparently the duckz nutz...well...these tunes have been done over a period of a year? so probably not really imho...

Link to comment
https://www.sau.com.au/forums/topic/24507-tuning-workshop/#findComment-731549
Share on other sites

guys if you're going to post a bad story then please only let it be your OWN personal experience and not a mate's or a mate of a mates. These theads can be very dangerous if the workshop in question reads comments made by people with no personal experience and if you do post your own experience then please ensure it is only factual and try ad leave out your own opinions and emitions as best you can

thank you

Link to comment
https://www.sau.com.au/forums/topic/24507-tuning-workshop/#findComment-731567
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...