Jump to content
SAU Community

Gt35r Vs Garrett T04z - Discussion (just Post In This Thread To Create A Database)


Recommended Posts

Brockas mine will be being re-tuned in the next week or two aswell so should have another 26/to4z to compare too.

using a turbosmart 48mm and avcr.. so will be interesting to see the boost curve aswell, what wastegate are you running?

Good to see a back to back comparison there. Even though the setup could be improved, presumably the improvements would effect both dyno plots. the results are pretty much what I expected - 500-600rpm more lag, 70-100 more hp in the top end.

We are pulling the t04z off my car in the next few weeks and we're going to put on one of the new GT3788R's. Should be very interesting to see what it can do. I will try to get back to back graphs.

The graph of 1bxx056 looks pretty much identicle to mine. Would be good to see that overlayed against a really properly setup 35r on good manifolds etc.

one of the new GT3788R's. Should be very interesting to see what it can do. I will try to get back to back graphs.

That would be tops !!

Are the GT37 available in t3 rear housing ?

GT35 FTW !

Just got mine done, Injectors now all in and tuned up.

Was tuned by Andy at hyperdrive but run up at allstar due to some wheel spin fun.

Now 561 rwhp up from 450rwhp !!

20-21 psi boost.

Still a stock jap import RB26(including stock cams n cams gears) with just bolt on gt35 turbo and injectors.

RedbackDyno560.jpg

http://www.youtube.com/watch?v=62ze0NXMWBU

This car has gone well over 600rwhp on an RB25 with GT35 and E85, Ultra reliable engine into its 4th season racing, we run it at 600rwhp as its a very basic RB25.

RB34 coming this season with a Housing change on the GT35.

Here's a copy of the graph.

With a built motor i'd be enjoying this all day every day :rofl:

Mmm is that more then Cerbera's Built 26 with T04z ?????

Redback24psi.jpg

Edited by Butters
Here's a copy of the graph.

With a built motor i'd be enjoying this all day every day :)

Mmm is that more then Cerbera's Built 26 with T04z ?????

Redback24psi.jpg

SMD simmo!!!

but yes that shit is impressive, why did you abort run?!? PING PING PING PING :P

We are pulling the t04z off my car in the next few weeks and we're going to put on one of the new GT3788R's. Should be very interesting to see what it can do. I will try to get back to back graphs.

Thats a very interesting change to make - what motivated that, and what are you hoping from it vs the T04Z? Are they both T3 flanged? I've often wondered about the GT3788Rs but not been too sure on what to expect... a comparison I've always been very curious about is the GT4088R and the T04Z.

Thats a very interesting change to make - what motivated that, and what are you hoping from it vs the T04Z? Are they both T3 flanged? I've often wondered about the GT3788Rs but not been too sure on what to expect... a comparison I've always been very curious about is the GT4088R and the T04Z.

my t04z is a split pulse t4 flange - same as the GT3788. The 4088R is a bigger turbo than the T04Z (compressor and turbine) so it will flow more HP, with a tiny bit more lag.

Main reason for doing the swap is simply that the Z is too doughy out of medium tight corners around the track. IE: turns 3/4 @ QR I take at about 80km/hr. 2nd gear == massive tailslide on exit, whilst 3rd gear == LAG all the way out of the corner. Hopefully the new turbo is not only slightly more responsive, but a lot more linear in power delivery. I make 1 bar at 4100rpm with the Z and 24psi at 4500. Thats not too laggy, but as soon as you go below 4000 rpm there is absolutely nothing there. I wouldnt care too much if the 3788 only makes 1 bar at 4000rpm as long as 3800/3900 still had SOMETHING available unlike the Z which comes on like a lightswitch once you get over 4.

The only unfortuante thing is that I wont be able to directly compare how the 2 turbo's would have worked on the track as I'm making some other significant changes to the car at the same time. So wont be able to say if the 3788 is soley responsible for better lap times, but hopefully combined with everything else we are doing it makes a big difference.

Still probably a couple of weeks away from doing the swap - will see how we go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...